JioMart Smart Portable Hand Massager Device User Manual
- July 26, 2024
- JioMart
Table of Contents
User Manual
Smart Portable Hand Massager Device
Please read and make sure you understand the manual before use.
In particular, make sure that you fully understand the precautions.
Once the newly purchased this unit, please charge it firstly, which can
protect the life of the battery. Use a 5V,1A( or 2A) cell phone charger to
charge it. When charging, the power indicator will flash, this indicate the
machine is charging. After the charging
completed, the machine power indicator will be went out.
Suitable group
- People who use computers for long time
- People who have poor palm blood circulation.
- Women who want to maintain hand beauty.
Product features
- Ergonomic design conforms to acupuncture points and curves of hands
- Pneumatic segmented extrusion massage
- Full palm acupuncture massage
- With Heat function for cold circumstance(Optional function).
- Microseismic massage increase the massage interest(Optional function).
Control Panel
Features
Components How to Use the Control Panel
Power button
Turn power on or off. Press for 2 seconds, turn on the power supply, and then
press the model button, the machine will start to work.
The default massage run time is 15 minutes, and the power will be turned off
automatically after 15 minutes.
Intensity button
The default value is L3, with a total of 6 levels of intensity.
You can select it from L3 – L4 -L5 -L6 – L1 -L2 in sequence.
L1 is weakest and L6 is strongest.
Mode key
The default model is P1, with a total of 6 modes available. You can choose
your favorite mode to massage, which is from P1-P2-P3-P4-P5-P6-P1 in sequence.
Vibration button
Press it to turn on/turn off the vibration. There are 2 modes of vibration.
You can choose according to your requirement.
Heating key
Press it to turn on/turn off the heating. 5 minutes later, the inner
temperature will go up obviously.
Troubleshooting method
| Unusual Circumstances | Possible Causes | Method of Processing |
|---|---|---|
| Unable to start product | No power with battery | Please recharge it. |
| Unit not started correctly | Press power button for 2 seconds | |
| Make a faint sound when in use. | Sound of air pump ( buzzing ) | These belong |
to normal sound, not fault
Sound of solenoid valve ( tick )
Specification parameter
| Product name | Hand Refresher |
|---|---|
| Product model | SM-001 |
| Voltage | DC3. 7V |
| Power | 5W |
| Working time | 15min |
| Weight | 1.1kg |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>