SAN HIMA SH-TENT-SY20 Shower Tent User Manual
- June 17, 2024
- SAN HIMA
Table of Contents
SAN HIMA SH-TENT-SY20 Shower Tent
ABOUT US
Founded in 2018, the San Him brand stands for passion and enthusiasm for exploring the spectacular nature of the great outdoors. Since its inception, the trusted solutions and proven designs that San Hima offers to the market have made adventure and travelling flexible and enjoyable! Based in Australia, San Hima has under its umbrella a wide selection of outdoor solutions, including cargo systems, vehicle protection accessories and tow & trailer parts, that are designed to help you carry your gear wherever your passion takes you and boost your performance when conquering the peaks! At San Hima, we have wild souls and we are committed to designing products that are tough enough to take on any adventures and at the same time, making them safe and easy to use. These values in our convictions are what drive us to make innovations. Since the pursuit of your passion shouldn’t be complicated. Live the Peak, Conquer the Everest, San Hima is your brand of choice!
SAFETY INSTRUCTIONS
- In windy conditions, it is highly recommended not to erect the shower tent as personal injury and / or property damage may occur.
- Select a level site clear of rocks, branches, and other hard or sharp objects, to set up your shower tent.
- Do not set up your shower tent under trees because of potential lightning strikes or falling tree limbs in inclement weather.
- Do not cut or modify the shower tent or mounting accessories.
- Do not exceed the vehicle manufacturer’s weight limits.
- Do not use damaged or excessively worn products.
- Keep exits clear.
- Remain cautious when pegs are in use.
- Keep an eye out for children when the shower tent is in use.
- Stow away the shower tent before operating the vehicle.
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS SHOWER TENT.
- Do not operate any devices which burn fuel inside the shower tent.
- Do not smoke in or near the shower tent.
- Do not cook inside the shower tent.
- Keep a lookout for any airborne burning embers that may come in contact with the tent. Keep a fire extinguisher or bucket of water nearby.
IMPORTANT FACTS
Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside of your shower tent. Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside the shower tent. It is NOT LEAKAGE through the fabric. It can be minimized by removing wet clothing from your shower tent and by providing good ventilation through the shower tent.
CARE AND MAINTENANCE
- To extend the life of your tent, it is recommended to pack it up when not in use.
- When it is time to pack up, check that the fabric is dry and free from dirt and debris, then reverse the set-up process.
- Do not pack pegs inside your shower tent. Use the provided accessory storage bag.
- If your shower tent requires cleaning, we recommend using lukewarm soapy water and a clean sponge to wipe down the material. Do not use abrasive cleaners or bleach.
PACKAGE CONTENTS
SPECIFICATIONS
INSTALLATION
STEP1
- If you mount your shower tent to a platform rack, you won’t need to use the sandwich plates or the longer bolts. Instead, use T-bolts (not included) and bolt the L brackets directly to the rack. Note: Please position the brackets to clear your vehicle or your trailer body panels.
- If you mount your shower tent to the mesh of a roof rack, the L brackets go on top of the mesh and the sandwich plates underneath. Use the long bolts to sandwich them together.
STEP2
Slot the shorter bolts into the back of the aluminium frame, and slide the
bolts to align with the holes on the L brackets.
STEP3
Insert the bolts through the holes on the L brackets. Add and tighten the nuts
on the back. Tip: If you are doing this by yourself, tie a strap around one
end of the travel bag, so you can focus on the other end without it falling
down.
SETUP
STEP1
Unzip the shower tent bag and release the straps, allowing the fabric to be released.
STEP2
Move the arms outwards and lock in place.
STEP3
Unfold the fabric and allow it to hang. You can adjust the straps at the top
to achieve the required height from the ground.
STEP4
Peg out the four corners and tension the straps as required.
STEPS
Plug the USB Type-A connector of the LED light strip to the USB Type A port of
your power source.
WARRANTY
San Hima warrants that each shower tent that is purchased while this Warranty
is in effect will be free from defects in materials and workmanship for a
period of 1 year from the date of receiving the product from San Hima or its
authorized distributor/dealer. If it is believable to be defective during the
1-Year Warranty Period, San Hima will, at its option, replace it with the same
or similar product, or issue a refund for the defective San Hima product. And
San Hima will pay for the cost of shipping or transportation of a defective
component. This warranty terminates if a Purchaser transfers the product to
any other person. And please retain your purchase receipt for Your records.
Please ensure that the San Hima shower tent should be installed and set up in
accordance with warnings and instructions listed in the user manual, and
should be used for the purpose for which it was designed. Any and all warranty
coverage does not cover: normal wear and tear, incorrect installation or
setup, damages as a result of failure to follow information in the user
manual, unusual, improper or negligent use or misuse, using the San Hima
shower tent other than for the purpose for which it was originally designed,
improper repair or maintenance, alteration, abuse, acts of nature, terrorism,
vandalism or adverse conditions. If further information or investigation is
required or if the claim does not meet the requirements under our warranty,
San Hima’II let you know.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>