SMART SYS6310 Application Ready Platform User Guide
- June 6, 2024
- Smart
Table of Contents
- SMART SYS6310 Application Ready Platform
- Confidential and Proprietary – SMART Wireless Computing Inc.
- License Agreement
- HARDWARE SPECIFICATION
- FCC
- BOARD FAMILIARIZATION
- SYSTEM SETUP AND USAGE
- COMPLIANCE DETAILS
- EU COMPLIANCE STATEMENT
- CONTACT INFORMATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SMART SYS6310 Application Ready Platform
6310™ Application Ready Platform (SYS6310)
User Guide
003829 Rev A
June 09, 2021
Submit technical questions at: https://www.smartwirelesscompute.com/techweb/
Confidential and Proprietary – SMART Wireless Computing Inc.
NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document
on public servers or websites to: TechSupport-
wc@smartwirelesscompute.com.
Restricted Distribution: Not to be distributed to anyone who is not an
employee of either SMART Global Holdings or its subsidiaries without the
express approval of SMART Wireless Computing.
Not to be used, copied, reproduced, or modified in whole or in part, nor its
contents revealed in any manner to others without the express written
permission of SMART Wireless Computing, Inc. All SMART Wireless Computing
Incorporated trademarks are used with permission. Other product and brand
names may be trademarks or registered trademarks of their respective owners.
This technical data may be subject to U.S. and international export, re-
export, or transfer\ (“export”) laws. Diversion contrary to U.S. and
international law is strictly prohibited.
SMART Wireless Computing Inc 39870 Eureka Dr Newark CA 94560
Revision History
| Revision | Date | Description | Author |
|---|---|---|---|
| A | 09/June/2021 | Initial Release | SP |
Approval Record
| Function | Name | Date |
|---|---|---|
| Reviewed By | DJ | 09/June/2021 |
| Approved By | PSD | 09/June/2021 |
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Confidential and Proprietary – SMART Wireless Computing, Inc.
Provided under NDA
License Agreement
Your use of this document is subject to and governed by those terms and
conditions in the SMART Wireless Computing Purchase and Software License
Agreement for the SDA450 based 6310TM Application Ready Platform (SYS6310),
which you or the legal entity you represent, as the case may be, accepted and
agreed to when purchasing 6310TM Application Ready Platform (SYS6310) from
SMART Wireless Computing Inc. (“Agreement”). You may use this document, which
shall be considered part of the defined term “Documentation” for purposes of
the Agreement, solely in support of your permitted use of the 6310TM
Application Ready Platform (SYS6310) under the Agreement.
Distribution of this document is strictly prohibited without the express
written permission of Inforce Computing Inc. and its respective licensors,
which they can withhold, condition or delay in its sole discretion SMART
Wireless Computing is a trademark of Inforce Computing Inc., registered in USA
and other countries.
Qualcomm® is a trademark of Qualcomm Inc. registered in the United States and
other countries.
Other product and brand names used herein may be trademarks or registered
trademarks of their respective owners.
This document contains technical data that may be subject to U.S. and
international export, re-export, or transfer (“export”) laws.
Diversion contrary to U.S. and international law is strictly prohibited.
SCOPE
This document describes the system setup and usage of Qualcomm Snapdragon
SDA450 processor-based 6310 TM Application Ready Platform (SYS6310
Anti-Static Handling Procedures
SBC has exposed PCB and chips. Accordingly, proper anti-static precautions should be employed when handling the kit, including:
- Use a grounded anti-static mat
- Use a grounded wrist or foot strap
Hardware Identification Labels
Labels are present on the 6310 TM Application Ready Platform (SYS6310). The following information is conveyed on the 6310 TM Application Ready Platform (SYS6310):
- Serial Label
- Ethernet MAC Address
- Wi-Fi and BT MAC Address
HARDWARE SPECIFICATION
INTRODUCTION
The 6310TM Application Ready Platform (SYS6310) can be used to develop, test, and deploy end-user product solutions around the Qualcomm Snapdragon SDA450 processor.
SYSTEM SPECIFICATION
The following table shows the hardware specification of the 6310TM Application Ready Platform (SYS6310)
Processor
Processor| Qualcomm® Snapdragon™450 Processor (14mm×12mm package)
Memory
eMCP (16 GB eMMC + 2 GB LPDDR3)
SBC I/O Interfaces
Interfaces| 1× uUSB v2.0 (Device), 2× USB v3.0 (Host), 1× HDMI Type D, 1×
RJ45,1xMicro SD Card slot
Form Factor
Mechanical| 109.05mm x 70.07mm x 30.02mm
Power
Power Input| 12V via DC Jack
Others
Temperature Specification| 0C to +40C
ARCHITECTURE
6310 Application Ready Platform (SYS6310) Block Diagram
FCC
CE
BOARD FAMILIARIZATION
The following figure shows the interface positions of the 6310TM Application Ready Platform (SYS6310)
| No. | Description |
|---|---|
| 1 | DC Power Jack |
| 2 | Micro-AB USB Connector (Debug) |
| 3 | Micro HDMI Connector (Type D) |
| 4 | Stacked USB 3.0 Type A Connector |
| 5 | Ethernet – RJ45 Connector |
| 6 | Slot for Micro SD Card |
SYSTEM SETUP AND USAGE
HARDWARE SETUP
Figure below shows the Hardware setup of 6310 TM Application Ready Platform (SYS6310)
HARDWARE OPERATION
STEPS TO BOOT 6310 APPLICATION READY PLATFORM (SYS6310)
Connect the DC power adaptor to the 6310 TM Application Ready Platform
(SYS6310)
NOTE: Carefully connect the DC connector to the jack provided on the
board.
CAUTION: Use 12V, 2A DC Adaptor.
- Connect the HDMI Out to a compatible display using an HDMI cable.
- Switch ON the DC adaptor.
- The board will boot up automatically.
NOTE: First-time booting might take longer time than normal booting.
Android Version:
After a few minutes, the “android” logo followed by the lock screen will be
displayed on the screen.
Mating Plug Specification for DC Jack
- Current rating 2 A
- Working Voltage:12V DC
FASTBOOT MODE
Follow the below steps to enter fastboot mode.
- Connect 6310 TM Application Ready Platform (SYS6310) and host PC using a Micro USB cable
- Power on the board.
- Once the device is booted up, open the command prompt in the host PC and enter the following commands
COMPLIANCE DETAILS
CLASS B PRODUCT COMPLIANCE STATEMENT
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
EU COMPLIANCE STATEMENT
The Frequency band(s) in which the radio equipment operates and maximum radio- frequency power transmitted in the frequency band(s) in which the radio equipment operates are shown below
WIFI 2.4GHz:| 20MHz: 14.92 dBm EIRP
40MHz: 14.13 dBm EIRP
---|---
WIFI 5GHz:| 5150MHz – 5250MHz, 5250MHz – 5350MHz, 5470MHz – 5725MHz:
20MHz: 11.61 dBm EIRP
40MHz: 13.77 dBm EIRP
80MHz: 12.40 dBm EIRP
Bluetooth Classic:| 9.19 dBm EIRP
BLE:| 1.79 dBm EIRP
- The 6310 is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU.
- This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
- A minimum separation distance of 20cm is required.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
CONTACT INFORMATION
- USA (Corporate Headquarters)
- SMART Wireless Computing Inc.
- 39870 Eureka Dr. Newark CA 94560.
- Phone: +1 510 623 1231
- For technical assistance refer: https://www.smartwirelesscompute.com/techweb
- For technical support contact: TechSupport-wc@smartwirelesscompute.com
- For sales contact: Sales-wc@smartwirelesscompute.com