TOW SMART 7427 Baja Tri Ball Mount Instruction Manual
- October 30, 2023
- TOW SMART
Table of Contents
TOW SMART 7427 Baja Tri Ball Mount
Product Information TRI-BALL MOUNT
The TRI-BALL MOUNT is a product designed for towing purposes. It is a hitch mount that can be inserted into the hitch receiver tube of a vehicle to tow trailers or other vehicles. The product is manufactured by Winston Products Company, LLC. The company provides warranty information upon request and can be found online at www.towsmart.com.
Product Usage Instructions
WARNING : Read and observe all warnings, instructions, and capacity limitations before using this product. Failure to comply with this warning and the associated instructions and capacity limitations may result in serious personal injury and/or significant property damage
- Insert the Ball Mount into the hitch receiver tube of the vehicle.
- Align Hitch Pin holes.
- Insert a Hitch Pin or Receiver Lock of a corresponding diameter, into the receiver tube hole so that the end is completely out of the other side of the tube, exposing the Hitch Pin hole or groove or lock end.
- Insert the straight leg of the Hitch Pin Clip into the Hitch Pin hole or groove until it can go no further, or snap on the end of Receiver Lock so that it is locked.
- The product is now ready for towing.
- Periodically check to see if the Hitch Pin Clip is still secure.
If any problems arise while using the product, do not return it to the retailer from which it was purchased. Instead, call 1-844-295-9215 for assistance with any problems.
WARRANTY
IF YOU EXPERIENCE ANY PROBLEMS WITH YOUR TOWSMART PRODUCT DO NOT RETURN THE UNIT TO THE RETAILER FROM WHICH IT WAS PURCHASED. INSTEAD, PLEASE CALL 1-844-295-9215 FOR ASSISTANCE WITH ANY PROBLEMS. WARRANTY INFORMATION IS AVAILABLE UPON REQUEST AND CAN BE FOUND ONLINE AT WWW.TOWSMART.COM.
Winston Products Company TOWSMART.COM WINSTON PRODUCTS, LLC. 30339 Diamond Parkway Cleveland, OH 44139