CORSAIR CA-9011203-EU Void RGB Elite USB Premium Gaming Headset User Guide
- June 6, 2024
- Corsair
Table of Contents
VOID RGB ELITE USB
CONTROLS AND FEATURES
GETTING STARTED WITH YOUR VOID RGB ELITE USB HEADSET
Connect your headset to a USB port on your PC.
Go to corsair.com/support/downloads to download the CORSAIR Utility Engine (“iCUE”) Software.
Using the ECU software will enable the full feature set of your headset.
Note: If the headset is used without software, some features will be disabled.
Install the iCUE software on a PC running Windows® 7, Windows®8.1, Windows®10, or later.
After installation is complete, reboot your PC and launch iCUE.
iCUE SOFTWARE CAN BE USED TO
Choose your RGB color preference and light intensity.
Select and customize audio equalizer (EQ) settings.
Adjust microphone input volume, and microphone sidetone.
Set 7.1 surround sound on or off.|
---|---
Note: Prolonged listening at high volumes may adversely affect your
hearing.
Take breaks between sessions and always begin with the volume at the lowest
possible level before increasing.
HEADSET AUDIO SETTINGS
Short key press (0.1-0.5 seconds) on JOG DIAL D toggles EQ.
Medium keypress (0.6-2 seconds) on JOG DIAL D toggles 7.1 surround sound.
HEADSET MIC CONTROL
Short key press (0.1-0.5 seconds) on mic mute button C toggles mute on and
off.
Long key press (2-4 seconds) on mic mute button C toggles sidetone on and off.
Note: iCUE software can also be used to control these features.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>