Smart Links POE4 PoE Switch User Guide

Links POE4 PoE Switch
User Guide

POE4 PoE Switch

Please install with the supporting devices. Installation Please confirm the following things before installation:

1. If the POE port power meet the power requirement of the connecting devices.
2. If the POE standard requirement and power supply match with the power receiving device, ‘112+, 3/6-(Mid-span)/4/5+, 7/8-(End-span).
3. lithe output power of the supporting power adapter is consistent with the specification in the label of the POE switch.

Please install the POE switch according to the following steps:

1. Put the POE switch on the surface of a large and stable table.
2. Plug the power adapter into the power connector, and then connect the power outlet through the power cord.
3. Connect the network devices to the POE switch port though network cable.

Note
Please do not put heavy products on the POE switch, and please ensure good ventilation environment for the POE switch. Please cut off the power first before plugging the power adapter.
Power Connect the power cord, plug it in, turn on the power. When turned on, the switch will automatically initialize, and at this time the following cases will occur for the LED lights:

1. Except the POE port lights, all the other lights will be off after bright, which means the restoration is successful.
2. Power LED remains lit.

Note If initialization is inconsistent with the above, please check the power.

Statement

Copyright @2006-2016 Our company All Rights Reserved
This document contains proprietary information that is protected by copyright. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written permission of our company.
The information and product specifications within this document are subject to change at any time, without notice and without notice and without obligation to notify any person of such change.
Safety recommendations and warnings

• Please keep the equipment good ventilated environment
• To avoid be affected with damp be affected with damp, away from electromagnetic interference. away from the fire
• Please use the manufacturers recommended accessories
• Don’t open the case, please professional maintenance

**** Note If any shortage or damage found, please contact us in time.

Product overview

Product Introduction
10/100M or 1000M unmanaged PoE switch can provide both 10/100M or 1000M Ethernet data and Power over network cable, it can be used as Ethernet Power Sourcing Equipment, it can automatically detect and identify whether connected devices such as IP camera comply with standard IEEE PoE 802.3af, 802.3at and supply power for them. 10/100M or 1000M unmanaged PoE switch easier the deployment of Wilress AP, IP camera and IP-based network equipment. PoE Technology is Power over Ethernet technology, It is refering to transfer both Ethenet data and and DC Power at the same time for IP Phone, Wilress AP, IP- based camera. These devices which receive DC power is called Powered Device(PD).

Feature

• Comply to IEEE802.3, IEEE802.3u, IEEE802.3af, IEEE802.3at.
• 10/100M or 1000M self-adaptive, down link port support PoE.
• All the ports support Auto MDI/MDIX.
• Each PoE port support Power up to 15.4Watts(IEEE802.3af), 30Watts(IEEE802.3at)
•  Support IEEE802.3x Full Duplex flow control and Duplex backpressure flow control function
•  Automatic MAC address learning and aging.
•  PIN assignment: Endpin(1/2+,3/6-), Mid-span(4/5+,718-)
• High performance full load power configuration.
• LED indicator monitor working status and help fault detection If PoE switch include Web management, have the following parameters:
• Web management function based On web.
• Provide PoE management, VLAN, Link Aggregation, Qos, MAC address binding and other intelligent management function

Indicator Description

Note Please confirm that the PD devices are complying with IEEE802.3af/at standard.
Priority: this function will protect device when it is overload, if all PD consumption are higher than specified, switch port will be sorted by priority, pont , port2, port3, port N then power supply of lowest priority will be off. Power port, Power adapter: please use 48V power supply, the switch will be damaged if use mismatched power supply; Please input AC110-245V150-60Hz for internal power supply switch.
PoE port: The PoE ports include PoE function, it can transmit power and data when connected matching device, you can estimate the working status of each port on front panel LED.
Ethernet Port: Except PoE port, other port are Ethernet RJ45 port, all port support Auto MDIMDIX, plug and play, also you can estimate the working status of each port on front panel LED. SFP Gigabit fiber Port: Two fiber port,all port support wire-speed forwarding, Rich port configuration. Seamless connection various network is allowed.

Connection Diagram

Model description with details

Product size:120x90x25mm(LxWxH) : P1004P:5 port 10/100M PoE switch, 1-4 port support PoE, IEEE802.3af, single port power 15.4W,PoE power budget 60W transmission range 100M(built-in power supply version can be order)
P1004P-at:5 port 10/100M PoE switch,1-4 port support PoE IEEE802.3at single port power 25.5W,PoE power budget 120W transmission range 100M(built-in power supply version can be order)
P1004PF:5 port PoE switch,1-4 port support PoE,IEEE802.3af,single port power 15.4W,PoE power budget 60W, Ethernet transmission range 100M,uplink port is single mode dual fiber SC interface(20km),(built-in power supply version can be order)
P1004PF-at:5 port PoE switch,1-4 port support PoE,IEEE802.3at,single port power 25.5W,PoE power budget 120W, Ethernet transmission range 100M,uplink port is single mode dual fiber SC interface(20km),(built-in power supply version can be order) P2004P:5 port 1000M PoE switch, 1-4 port support PoE, IEEE802.3af, single port power 15.4W,PoE power budget 60W .
Product size:140x90x28mm(LxWxH) :
POE1004P-N:5 port 10/100M PoE switch , 1-4 port support PoE , IEEE802.3af, single port power 15.4W,PoE power budget 60W transmission range 100M
Product size:190x102x28mm(LxWxH) :
P1008P:9 port 10/100M PoE switch,1-8 port support PoE,IEEE802.3af,single port power 15.4W,PoE power budget 96W,transmission range 100M(built-in power supply version can be order)
P1804P:9 port 10/100M PoE switch,1-4 port support PoE,IEEE802.3af,single port power 15.4W,PoE power budget 60W,transmission range 100M(built-in power supply version can be order) P1804P-at: 9 port 10/100M PoE switch ,1-4 port support POE,IEEE802.3at,single port power 30W,POE power budget 96W, transmission range 100M(built-in power supply version can be order)
P1008PF: 9 port 10/100M PoE switch,1-8 port support PoE,IEEE802.3af,single port power 15.4W,PoE power budget 96W,Ethernet transmission range 100M,uplink port is single mode dual fiber SC interface(20km),(built-in power supply version can be order) P1804PF: 9 port 10/100M PoE switch,1-4 port support PoE,IEEE802.3af,single port power 15.4W,PoE power budget 60W,Ethernet transmission range 100M,uplink port is single mode dual fiber SC interface(20km)(built-in power supply version can be order) P1804PF-at: 9 port 10/100M PoE switch,1-4 port support PoE,IEEE802.3at,single port power 25.5W,PoE power budget 96W,Ethernet transmission range 100M,uplink port is single mode dual fiber SC interface(20km)(built-in power supply version can be order) P1008P-at:9 port 10/100M PoE switch,1-8 port support PoE,IEEE802.3at,single port power 25.5W,PoE power budget 120W.
P1008PF-at:9 port 10/100M PoE switch,1-8 port support PoE,IEEE802.3at,single port power 25.5W,PoE power budget 120W, transmission range 100M,uplink port is single mode dual fiber SC interface(20km). P2008P:8 port 100/1000M PoE switch,1-8 port support PoE,IEEE802.3af,single port power 15.4W,PoE power budget 96W, transmission range 1000M. P200BP-at:8 port 100/1000M PoE switch,1-8 port support PoE,IEEE802.3at,single port power 25.5W,PoE power budget 120W, transmission range 1000M.
Product size:280x186x44mm(LxWxH) :
P1008P-N:9 port 10/100M PoE switch,1-8 port support PoE,IEEE802.3at,single port power 25.5W,PoE power budget 180W, transmission range 100M,built-in power supply
P1008PF-N:9 port 10/100M PoE switch,1-8 port support PoE,IEEE802.3at,single port power 25.5W,PoE power budget 180W, transmission range 100M,uplink port is single mode dual fiber SC interface(20km),built-in power supply P1008G-N:8 port 10/100M +1 Gigabit PoE switch,1-8 port support PoE,IEEE802.3at,single port power 25.5W,PoE power budget 180W, transmission range 1000M,9 port is 100/1000M,built-in power supply
P1010G:8 port 10/100M+1 Gigabit Copper/SFP Combo uplink Port +1 Gigabit unmanaged PoE Switch,1-8 port support PoE,IEEE802.3at, single port power 25.5W,PoE power budget 180W,built-in power supply
P10100-M:8 port 10/100M+1 Gigabit Copper/SFP Combo uplink Port +1 Gigabit managed PoE Switch,1-8 port support PoE,IEEE802.3at, single port power 25.5W,PoE power budget 180W,built-in power supply
Product size:440r175x44mm(LxWxH) :
P1016P-M:16 port 10/100M+2 Gigabit Copper/SFP Combo uplink Port managed PoE Switch,1-16 port support PoE,IEEE802.3allat, single port power 15.4W/25.5W,PoE power budget 270W,built-in power supply. P1024P-M:24 port 10/100M+2 Gigabit Copper/SFP Combo uplink Port managed PoE Switch,1-24 port support PoE,IEEE802.3af/at, single port power 15.4W/25.5W,PoE power budget 440W,built- in power supply. P2016P-M:16 Gigabit+2 Gigabit Copper/SFP Combo uplink Port managed PoE Switch,1-16 port support PoE,IEEE802.3af/at, single port power 15.4W/25.5W,PoE power budget 270W,built-in power supply. P2024P-M:24 Gigabit+2 Gigabit Copper/SFP Combo uplink Port managed PoE Switch,1-24 port support PoE,IEEE802.3af/at, single port power 15.4W/25.5W,PoE power budget 440W,built- in power supply.
P1016P:16 port 10/100M+2 Gigabit Copper/SFP Combo uplink Port unmanaged PoE Switch,1-16 port support PoE,IEEE802.3af/at, single port power 15.4W/25.5W,PoE power budget 270W,built-in power supply. P1024P:24 port 10/100M+2 Gigabit Copper/SFP Combo uplink Port unmanaged PoE Switch,1-24 port support PoE,IEEE802.3af/at, single port power 15.4W/25.5W,PoE power budget 440W,built- in power supply.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>