SFE SD850 Digital Portable Radio User Manual
- June 6, 2024
- SFE
Table of Contents
SD850 Digital Portable Radio
Use this SD850 Digital Portable radio in the environment with temperature
between 0-40 , otherwise,it may damage your Digital portable radio. It can be
operating under 2000m. Hereby,Quanzhou SFE Electronic technology Co.,Ltd.
declare that the radio equipment type SD850 Digital portable radio is
compliance with Directive2014/53/EU.
For safe operating,the antenna for the product shall be least 25 mm away from
your face and 0 mm from your body with belt clip. The product supplied by Li-
ion battery and charged from approved travel Charger.
RF Exposure Information
WARNING! Read this information before using the radio. In August 1996 the
Federal Communications Commission (FCC) of the United States with its action
in Report and Order FCC 96-326 adopted an updated safety standard for human
exposure to radio frequency electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety standard
previously set by both U.S. and international standards bodies. The design of
the radio complies with the FCC guidelines and these international standards.
Never allow children to operate the radio without adult supervision and the
knowledge of the following guidelines.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference. For a
transmitter that can only be operated with an FCC license,warningss concerning
compliance with applicable licensing requirements and information concerning
license applianction procedures.
Our radio generators RF electromagnetic energy during transmit mode. This
radio is designed for and classified as”Occupational Use Only”,meaning it must
be used only during the course of employment by individuals aware of the
hazards,and the ways To Minimize Such hazards. This radio is NOT intended for
use by the”General Population” in an uncontrolled environment. This radio has
been tested and complies with the FCC RF exposure limits for”Occupational Use
Only”. Inaddition, our radio complies with the following Standards and
Guidelines with regard to RF energy and electromagnetic energy levels and
evaluation of such levels for exposure to humans: —IEEE Std. 1528:2013 and
KDB447498, Evaluating Compliance with FCC Guidelines for Human Exposure to
Radio Frequency Electromagnetic Fields. —American National Standards Institute
(C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure
to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. —American
National Standards Institute (C95.3-1992), IEEE Recommended Practice for the
Measurement of Potentially
Hazardous Electromagnetic Fields-RF and Microwave. The information listed
above provides the user with the information needed to make him or her aware
of RF exposure, and what to do to as-sure that this radio operates with the
FCC RF exposure limits of this radio.
RF Exposure Information
Electromagnetic Interference/Compatibility During transmissions, Our radio
generates RF energy that can possibly cause interference with other devices or
systems. To avoid such interference, turn off the radio in areas where signs
are posted to do so. DO NOT operate the transmitter in areas that are
sensitive to electromagnetic radiation such as hospitals, aircraft, and
blasting sites. Occupational/Controlled Use The radio transmitter is used in
situations in which persons are exposed as consequence of their employment
provided those persons are fully aware of the potential for exposure and can
exercise control over their exposure. Attention: This radio complieswith IEEE
and ICNIRP exposure limits for occupational/controlled RF exposure emvironment
at operating duty factors of up to 50% and is authorized by the FCC for
occupational use only. An appropriate warning lable is affixed to all units.
In order to comply with RF exposure requirements, a minimum distance of 2.5cm
must be maintained when held-to-face, and body-worn operations are restricted
to the approved original acessories (belt clip)a minimum distance of 0 mm. Do
not use this device when antenna shows obvious damages. This product is
compliance to FCC RF Exposure requirements and refers to FCC website
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID:
2AYFQ -SD850 to gain further information include SAR Values. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
WARNING! It is up to the user to properly operate this radio transmitter to
insure safe operation. Please adhere to the following: Use only the supplied
or an approved antenna(max gain 2.15dBi.) Unauthorized antennas,
modifications, or attachments could impair call quality, damage the radio, or
result in violation of FCC regulations.
If a damaged antenna comes into contact with the skin, a minor burn may
result. Please contact your local dealer for a replacement antenna.
RF Exposure Information
FCC Compliance Statements:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna. — Increase the separation
between the equipment and receiver. — Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected. — Consult the dealer or an experienced radio/TV
technician for help.
RF Exposure Information
Licensing Information
Use our radio in USA is subject to the rules & regulations of FCC. Changes or
modifications not expressly approved by our may void the user authority
granted by the FCC to operate this radio and should not be made. To comply
with FCC requirements, transmitter adjustments should be made only by or under
the supervision of a person certified as technically qualified to perform
transmitter maintenance and repairs in the private land mobile and fixed
services as certified by an organization representative of the user of those
services. Replacement of any transmitter component (crystal, semiconductor,
etc) not authorized by the FCC equipment authorization for this radio could
violate FCC rules.
Note: Use of this radio outside the country where it was intended to be
distributed is subject to government regulations and may be prohibited.
Important: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
device. Your radio is set up to transmit a regulated signal on an assigned
frequency. It is against the law to alter or adjust the settings inside the
radio to exceed those limitations. Any adjustments to your radio must be made
by qualified technicians.
WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE
SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>