petTec PPTDT15966 Plush Pet Toy Trout Instructions

June 6, 2024
petTec

petTec PPTDT15966 Plush Pet Toy

petTec PPTDT15966 Plush Pet Toy fig1

HERE WE GO

Thank you for choosing our toy. With the Petree Plush Pet Toy your pet will always be busy

Important Safety Instructions

READ ALL INSTRUCTIONS AND WARNINGS IN THIS OPERATING MANUAL BEFORE USING THE PLUSH PET TOY.

  1.  Please do not immerse the Plush Toy in water and do not soak the Plush Toy when the electronics are inside the Plush Toy.
  2. Do not immerse the device in other liquids either. The mechanism that makes the fish move is not waterproof. If the fish is dropped in the water, the electro­nics will get damaged.
  3. Remove the electronics from the Plush Toy before cleaning it.
  4. Do not put the Plush Toy in the microwave or in an oven. Do not expose the Plush Toy to high temperatures.
  5.  Do not expose to hot sources such as fire or prolonged direct sunlight.
  6. The Plush Toy is designed as a toy for cats! The Plush Toy is not intended for any other use.
  7. Stop using the product if the battery begins to smell or smoke.
  8.  If you experience any malfunction, contact our customer service directly.
  9. The toy is designed for indoor use only, leaving it outside may caus it to dampen and damage the mechanism.

SPECIFICATIONS

  • Name
    Plush Pet Toy

  • Model
    Lobster

  • Dimension
    300x110x60 mm

  • Weight
    110g

  • Battery
    Litium-lon / 500mAh / 5V

  • Content
    Lobster Toy, Micro-USB cable, 2x Catnip, Manual

CHARGING

  • The toy is fully charged in one hour
  • One charge provides 150 dancing cycles
  • RED LIGHT for Charging  GREEN LIGHT for Fully Charged

CATNIP

  • Only use catnip that is sealed into a porous bag e.g. teabag [2 bags included)
  • Insert catnip bag into the pouch provided and close with the velcro.

IMPORTANT: Do not use loose catnip as this can damage the mechanism.

petTec PPTDT15966 Plush Pet Toy fig4

HOW TO PLAY/ USE

  • Open the fish on the belly by pulling apart the Velcro.
  • Fully charge the dancing fish with the supplied Micro-USB charging cable until the LED turns green.
  • Insert the catnip into the pouch on the side, move the switch to the ON position and close the fish.
  • The motion sensor will activate when moved, cycling through 3 types of realistic movements sequentially.
  • No need to turn off the Toy unless you don’t want it to move on touch. The Toy goes into sleep mode once it isn’t being touched.

IMPORTANT : Be sure to turn off and remove the mechanism from the fish before cleaning the soft outside cover.

petTec PPTDT15966 Plush Pet Toy fig3

FURTHER SAFETY INSTRUCTIONS

The device is designed for pets. Not recommended for children without adult supervision.

CUSTOMER SERVICE

petTec PPTDT15966 Plush Pet Toy fig5

petTec is a brand of stage 10 GmbH Trostraba 49 10119 Berlin www.petTec,com

DISPOSAL

petTec PPTDT15966 Plush Pet Toy fig6

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference,
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

petTec User Manuals

Related Manuals