petTec Pet Cam Free Dog Camera User Guide
- June 12, 2024
- petTec
Table of Contents
Pet Cam Free
WATCH YOUR PET
For a rewarding relationship
HERE WE GO…
Thank you for choosing our pet cam. With the PetTec Pet Cam Free you’ll always
have your darling in view.
Important safety instructions
READ ALL INSTRUCTIONS AND WARNINGS IN THIS OPERATING MANUAL BEFORE USING THE PET CAM FREE.
- Please do not disassemble and modify the PetTec Pet Cam Free. The device requires neither maintenance nor servicing. In case of malfunction, please contact our customer service.
- In order to ensure proper use of the device, we recommend that you only use the original parts. Use only the supplied assembly parts for mounting the device.
- The device should not be affected by any renovation work, be it the use of paint or wallpaper.
Legal Notice
-
The PetTec Pet Cam Free has been designed for indoor and outdoor use.
Laws in your country may limit observation of areas outside of your home or property. Please inform yourself about local legislation. To protect the privacy of others, mount the camera so that you cannot record images of public areas, streets, or your neighbor’s property. We also recommend informing relatives, visitors and domestic workers about the camera and its function. -
Please note that the app will not inform you automatically in case of emergency or burglary. If necessary, an emergency call must always be placed by yourself.
Stage10 GmbH does not provide any form of guarantee for missing or incorrect notifications or recordings.
PRODUKTÜBERSICHT
Content:
- PetTec Pet Cam Free
- Bracket
- Micro-USB Cable
- Screws
- Manual
IMPORTANT INSTRUCTIONS
Status LED display
- Permanently red LED – no connection to internet possible
- LED blinking red – ready to connect to Wi-Fi
- LED blinking red quickly – Wi-Fi connection is in progress.
- Permanently blue LED – connection to Wi-Fi works properly
- LED blinking blue – ready for manual connection to Wi-Fi
- LED blinking blue quickly – manual Wi-Fi connection is established.
- No LED – The camera is turned off / not operational.
Micro-USB cable feeder
The connector supplies power to the camera. If required, conventional microUSB
cables with different lengths may be used.
Microphone/speaker
The combination of built-in microphone and speaker allows two-way
communication.
Micro-SD card slot
Micro-SD cards up to 128GB in size may be used.
Reset button
The reset button must be pressed with a narrow object for approx. 5 seconds to
allow the camera to be reset to factory default settings.
To activate manual Wi-Fi setup, the reset button has to be pressed by a narrow
object for about 1 second.
GETTING STARTED
- Please connect the camera with a micro-USB cable and plug it into the charger plug. The power plug must be connected to a power outlet.
- After about a minute, the camera will beep and the LED will flash red. This signals that the camera is ready to connect to the Wi-Fi network.
- Download the „PetTec Snoop Cube“ app from the Apple App Store or Google Play Store and install the app on your mobile device. Now follow the instructions in the app to complete the camera setup successfully.
- A Wi-Fi router with internet connection and the associated password must be available. Your mobile device must be connected to the Wi-Fi network of your router on which you want to connect the camera.
- A stable Wi-Fi connection is required to ensure proper operation.
|
---|---
https://play.google.com/store/apps/details?id=com.pettec.snoopcube|
https://itunes.apple.com/us/app/snoop-
cube/id1389673878?mt=8
PetTec Snoop Cube App
MOUNTING OPTIONS
Mounting via wall bracket
- Drill two holes and insert the dowels suitable for your wall (sold separately).
- Then screw the bracket to the wall with the screws provided.
Installation without bracket
TECHNICAL DETAILS
Requirements| • High-Speed-Internet
• WiFi Connection
• Frequency 2.4 GHz
---|---
Data storage| • Supports Micro-SD cards up to 128 GB
• Micro-SD cards available separately (Requires class 10 oder higher)
Video & Audio| • Resolution: 1080p HD 30fps
• Format: H.265
• Field of vision: 120°
Image sensor| • Night vision: up to 10 m
• Full color
• CMOS
• Digital zoom
Audio| • Loudspeaker
• Microphone
Motion detection| • Motion detection: 3 available settings
• Instant E-Mail alarm & push notifications
Measures & weight Camera| • Dimensions: 59 x 59 x 116mm
• Weight: 260g
Rechargeable battery| – Battery capacity: 9,000mAh
– Charging via Micro-USB cable via USB.power supply unit
– Charging via solar panel possible
– Battery life (depending on user behaviour): up to 9 months
Energy| – Consumption in stand-by mode: 200-800µA
– Consumption in working mode: 150-200mA
– Maximum power consumption: 2W
– Rated power input (Micro-USB): DC 5V/1A
Outdoor use| – Protection class: IP65 – Weatherproof / water jet protected
– Temperature range: -20° to +50
IMPORTANT INFORMATIONS
Radio signal The radio transmission signal may be adversely affected by
external influences (e.g., electric motors, defective electrical appliances).
The range of the radio transmission signal is usually weaker within buildings
than in the open field. Similarly, the structural works/conditions affect the
radio range of the device. Bluetooth devices such as headphones or speakers
can also negatively affect the radio signal of the device. The signal strength
can also be reduced by environmental influences such as humidity.
Environmental protection
Please note that non-disposable electrical and electronic appliances as well
as batteries must be recycled separately and in an environmentally friendly
manner (European Directive on Waste Electrical and Electronic Equipment). Use
the country-specific return and collection systems for the recycling of
electrical and electronical appliances as well as for batteries. Disposal of
batteries in household waste is prohibited.
CUSTOMER SERVICE
Declaration of conformity
Stage10 GmbH confirms that the product described in these instructions (Pet
Cam Free) conforms to guideline 2014/53/EU. The complete text of the EU
declaration of conformity is available at the following URL:
Declaration of conformity (see chapter „Declaration of conformity“):
Products designated with this symbol fulfill all applicable community
provisions of the European Economic Area.
Stage10 GmbH declares that, on the date the equipment accompanied by
this declaration is placed on the market, the equipment conforms with all
technical and regulatory requirements of the relevant directives, regulations
and standards.
MANUFACTURER INFORMATION AND SERVICE
If you have questions about the PetTec Pet Cam Free or experience problems
using it, first contact us via email at the following address:
info@PetTec.de
PetTec® is a brand of Stage10 GmbH | Oranienburger Str. 45 | 10117 Berlin |
www.PetTec.com
DISPOSAL
Disposing of packaging
Please sort the packaging before disposal:
- Cardboard and paperboard with paper recycling
- Plastic wrap with recyclables
Disposal of devices Applicable in the European Union and other European
countries with systems for the separate collection of recyclables. Do not
dispose of used devices with household trash! If your Pet Cam Free is no
longer usable, each user is obligated by law to dispose of used devices
separately from household trash, e.g. at a collection site in your
municipality. This ensures that used devices are recycled properly and that
negative environmental effects are avoided. Therefore, electronic devices are
marked with the symbol shown here.
You can find further information about our products, troubleshooting, and
helpful tips at: support.PetTec.de
Free can be used with other PetTec Pet Cams
Pet Cam Free
Art-No. 16167
EAN 4 250541 925805
https://support.pettec.de/hc/de/categories/360000105665-Pet-Cam-Snoop- CubePet-Cam-lite
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>