Leader Premiums AE0151 Bamboo Wireless Light-Up Speaker Instruction Manual
- June 6, 2024
- Leader Premiums
Table of Contents
Bamboo Wireless Light-Up Speaker
Instruction Manual
What’s Included:
1x Wireless Speaker / 1x USB to Micro-USB Charging Cable
Diagram:
- Long Press: Power On/Off
- Long Press: Volume Up / Short Press: Next song/channel
- Short Press: Play/Pause / Double click: Will search for channels when using the radio function
- Long Press: Volume Down / Short Press: Previous song/ channel
- TF Card Slot
- 5V USB Charging Port
- LED: Red while charging, Flashing Blue while on
Specifications:
- Pairing Name: AE0151
- Battery Capacity: 300mAh
- Playback Time (at max volume): 1.5 hours
- Charging Time: 2.5 hours
- Measurements: 2 3/8” x 2 3/8” x 2” (58x58x48mm)
LED Indicator:
- Charging in Progress: Glowing Red LED
- Charging Complete: Red LED off
Charging the Speaker:
- Connect the provided USB cable to a certified 5V USB-C wall adapter.
- Once on, the speaker will enter wireless pairing mode.
- Search for “AE0151 on the wireless-enabled device to pair.
- Use this speaker’s controls or your audio device for track selection and volume control.
Connecting the Speaker Using Wireless:
- Long press the On/Off button to turn on the speaker.
- Once on, the speaker will enter wireless pairing mode.
- Search for “AE0151 on the wireless-enabled device to pair.
- Use this speaker’s controls or your audio device for track selection and volume control.
Caution & Safety:
- Please read all safety and operating instructions before use.
- Do not put fingers or hands into the product.
- Do not expose the product to moisture, sunlight, or other heat sources.
- Operating temperature range between 32°F (0°C) and 113°F (45°C).
- Using the product incorrectly or using incorrect output above rating may result in the risk of fire or injury to persons.
- Use the correct voltage charger, 5V only.
- Do not use the product that is damaged or modified as it may exhibit unpredictable behavior resulting in fire, explosion, and/or risk of injury.
- Do not disassemble the product. Take it to a qualified service person when services or repairs are required. Incorrect reassembly may result in a risk of fire or injury to persons.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Switch off the product when not in use.
- Keep away from children and ensure all adults who use this product read and follow these instructions and warnings.
- Keep this manual in a convenient location for future reference and include it when passing the product to 3rd parties.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on. The user is encouraged to try to correct the interference by one or more
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.