Leader Premiums AF0060 TWS Earbuds User Manual
- June 6, 2024
- Leader Premiums
Table of Contents
Leader Premiums AF0060 TWS Earbuds
charging for box
- put the charging cable in the Micro-USB port, LED blue light flash
- when it is full charged, the blue light on
charging for earbuds
- put the earbuds in the charging box, red LED light on
- when it is fully charged, the red light is off red light.
mark: If the earbud battery is low, the sound of the earbud is lowered and a warning sound is heard, indicating that the battery is low.
using method
- long-press the button for around 3 seconds, the red and blue light flash. the two earphones pay automatically when the earbuds pair successfully, the vice earbuds light off.
- The 2 earbuds will pair with each other automatically after power on. One of the earbuds will become the master unit. The master earbud LED (red and blue) light will flash alternately, and the other earbud will light off.
- After 2 earbuds pair with each other, enable the Wireless setting in the Mobile device, search “25009”, click it for connection. You will hear “CONNECTED “if the pairing successful.
- play/pause music: push the button for play and pause music
- quick click the button for 3times, switch to the next song; quick click the button for 2times, switch to the last song.
- long-press the button for 3seconds, turn off the earbuds. red light flashes twice.
Specifications
395082 25009
earbud input: DC 5V/40mA
charging box input: DC 5V/400mA
charging box output: DC 5V/100mA
FCC Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or
television reception, which can be determined by turning the device off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment FCC ID: 2APYY-AF0060