Leader Premiums AE0195 Wireless Speaker User Manual
- June 5, 2024
- Leader Premiums
Table of Contents
User Manual
Premiums AE0195 Wireless Speaker
1: Micro Socket 2: LED indicator 3: ON/OFF button
Charging the Battery:
- Insert the charging cable into the Micro USB input port & the LED indicator light will turn on to indicate that the device is charging.
- After charging is completed, the LED indicator light will turn off.
NOTE: In case of low battery, the speaker volume will lower down & you will hear a warning tone from the speaker indicating low battery.
Bluetooth Pairing for Music/Phone call
- Turn on the speaker by holding the ON/OFF button for 3 seconds. You will hear a voice from the speaker indicate Power on.
- Turn on your device and activate the Bluetooth function. Search for Bluetooth name “25401” and click to pair the speaker. You will hear a voice from the speaker & the blue indicator light will turn on.
- Press the ON/OFF button to play/pause music.
- Prey Song: Quick press twice Next Song: Quick press three times
- Turn off the speaker by holding the ON/OFF button for 5 seconds and you will hear a voice indicating “Power Off.”
Note:
- Bluetooth connection and transmission may be affected by the surrounding environment. Metal and some other materials can absorb or block the signal, influencing the distance of data transmission.
- Fully charge your speaker before using it for the first time (when the speaker battery gets too low, the sound quality will be not as good).
- Please do not expose the speaker to a high-temperature environment.
- 1:PX4: Is resistant to water splashes from any direction.
Specifications:
Power rating
Frequency Response
THD
S/N
Speaker Parameter
Battery
Bluetooth Version| 3W
20HZ-20KHZ
<1%
80DB
40Ω 3W diameter 52MM
3.7V/300MAH
Bluetooth V5
---|---
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Dongguan Longjing Electronic
Co. Ltd is under license. Other trademarks and trade names are those of their
respective owners. Manufacturer: Dongguan Longjing Electronic Co., Ltd.
Bluetooth Listing: D037188 Item Number: 25401
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
FCC ID 2APYY-AEO195
Made in China