Leader Premiums AF0031 TWS Bluetooth Earbuds User Manual
- June 6, 2024
- Leader Premiums
Table of Contents
Leader Premiums AF0031 TWS Bluetooth Earbuds
Charging the adaptor
- Insert the charging cable into the Micro USB input port & the LED indicator will turn on
- After charging completed, the LED indicator will fully turn on.
- This item with wireless charger function.put it on a wireless charger it will charging
Charging the earbuds
- Put the earbuds on the charging adaptor and the LED indicator will turn on red when it is charging.
- After charging completed, the LED indicator will turn on blue
NOTE: In case of low battery, the speaker volume will lower down & you will hear a warning tone from the speaker indicating low battery.
Pairing for music/phone call
- Turn on the earbuds by long pressing button for about 3seconds. You will hear a voice from the speaker along with the blue and red indicator flashing to indicate Power on.
- Turn on your device and activate the Bluetooth function.
- Search for Bluetooth name “AF0031” and click to pair, you will hear a voice from earbuds. Press the button to pause and press twice to choose for next song. You just need to press button to answer the call.
- Turn off the earbuds by pressing button for around 4 seconds and you will hear a voice indicating Power off.
Note: about the using environment.
- Bluetooth connection and transmission may be affected by the surrounding environment like tress, metal and some other materials, for they can absorb or block the signal, so the distance of data transmission may be influenced as well.
- Fully charge the device while using for the first time, (when the battery gets lowered, the sound will be not as good as the sound in normal case.)
- Please do not expose the earbuds into the high temperature environment.
Specifications
Wireless charger Input: 5V 300mA
Adaptor:
Input: 5V 300mA
Output: 5V 300mA
Battery: 3.7V/240mA
Total: 400mA
Earbuds
INPUT: 5V 40mA
Battery: 30mAh
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC ID: 2APPY-AF0031-A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>