HOLMAN DLW4510 45mm Warm White Deck Lights User Guide
- June 6, 2024
- Holman
Table of Contents
DLW4510 45mm Warm White Deck Lights
User Guide
2-Pin Plug + Socket Connection
Holman Warm White Deck Lights use a 2-Pin Plug + Socket connection. Only other
Holman 2-Pin Plug + Socket products are compatible with these lights. These
lights are not compatible with other brands and will void your warranty if
used with other brands.
2 of 16
Overview
Introduction
Thank you for purchasing Holman 45mm Warm White Deck Lights. Our system is
completely DIY and designed to help illuminate and add ambience to your
outdoor space. These can also be used to light up wooden steps or create a
safety barrier around the edge of your decking.
® This instruction manual contains useful information on the proper use and care of this product. Please read through all instructions before attempting assembly. Keep this user guide handy for future use.
Package Contents
- 5× 45mm DAISY-CHAIN deck lights
- 1× 45mm END deck light
- 1× 2-Pin Connection Tee
Setup
Choosing your controller
Holman have a range of lighting controllers to suit all users. Choose the
correct Warm White Lighting Controller that suits your requirements.
Warm White Wi-Fi Garden Light Controller Our latest Lighting Controller
features Wi-Fi connectivity, allowing access to your Garden Lights from
anywhere in the world. Smart automations and custom scene options allow you to
light up your garden, however you want.
Warm White Bluetooth® Garden Light Controller. Our Garden Light
Controller gives you custom scenes and full brightness control with a
Bluetooth® connection and the iGardenerTM app. Connect up to 4 controllers to
one device.
Setup
Choosing your controller (continued)
Warm White Garden Light Transformer Power up to 60W of Warm White lights
in your garden. This Garden Light Transformer Hub does not require a
smartphone to operate and is limited to turning your lights on and off.
Mounting your controller
Before beginning installation of your Deck Lights , you will need to
install your Lighting Controller to determine your starting point.
For ease of use, eye level placement is recommended. Ideally, your controller
location should not be exposed to rain or areas prone to flooding or heavy
water.
1. Install the Lighting Controller [a] near a 240V AC power point ideally
located in a house, garage, or exterior electrical cubicle
® All Holman controllers have a 60w capacity. Lighting set-ups that include
more that 60w of garden lights will require additional controllers
Installation
Main Lighting Cable (Extension Cable) Once the Lighting Controller is mounted, you can connect your main lighting cable. This cable is where you will `branch’ off your Deck Lights or other Holman lighting products.
- Connect your first Extension Cable [a] to the Lighting Controller [b]
- Secure the Extension Cable by hand tightening the weather proof end cap [c] on the end of the cable ® Extension Cables are available in 1m, 2m, 5m and 10m. Choose the correct length to reach from your Lighting Controller to your first lot of Deck Lights
Installation
Connection Tee
Each pack of Deck Lights comes with a Connection Tee. This is what connects
your Deck Lights to the main lighting cable.
- Join one end of the Connection Tee [a] to the Extension Cable [b]
- Secure the Connection Tee by hand tightening the weather proof end cap [c]
- Connection Tees come with one mini cable end [d], this end connects to your lighting product Á Do not use more than one (1) pack of Deck Lights per Connection Tee. Doing so may result in wattage loss ®
If you are connecting more than one pack of Deck Lights, refer to the connection diagram on page 12 and 13
Installation
Deck Light Spacing
Deck Lights come with 1800mm of space between each light when connected.
Before installation, we suggest marking your decking exactly where you want to
install your lights to ensure the spacing is correct.
1. Main cable size ø15mm
2. Mini cable size ø10mm
Installation
Drilling Holes
Deck panels will need to be removed to hide lighting cables underneath. For
safety, we also recommend removing deck panels to ensure no other cabling is
behind.
® Refer to our sizing chart below to determine the correct spade drill bit
size
1. Remove the deck panels that you will be drilling into
2. Drill the required holes into your deck that were marked previously [a]
SPADE DRILL BIT SIZE
18mm Deck Lights
14mm
30mm Deck Lights
22mm
45mm Deck Lights
30mm
2m Mini Spacer Cable
USE WITH MINI CABLE ONLY ø10mm
9 of 16
Installation
Inserting Deck Lights
1. Insert both cable ends of one of your c Daisy-Chain Deck Lights [a] through the first drill hole
2. Push the Deck Light into your drill hole [b] until it is flush with your decking. The metal arms will secure against the back of your deck
3. Connect this Deck Light to your Connection Tee [c] with the mini cable end
4. Insert the rest of your Daisy-Chain Deck Lights into your deck using steps
1 and 2
5. Insert the End Deck Light into the 6th drilled hole and connect to the
last Daisy-Chain Deck Light
6. Connect the cabling of all Deck Lights together
® Refer to the opposing drawing for correct installation
® Refer to the steps on page 12 to 13 for installing multiple packs of Deck
Lights
Installation
Deck Lights Connection Drawing
- Garden Light Controller
- Extension Cable
- Connection Tee
- Daisy-Chain Deck Lights
- End Deck Light
The Holman website has a host of additional information on features. Head to
support.holmanindustries.com.au for more tips, tricks and support content.
If you still need help, feel free to email our friendly Customer Service team
at [email protected] or call at 08 9416 9999.
Installation
Inserting Multiple Deck Light Packs
1. Attach your second Extension Cable [a] to the free end of your first
Connection Tee [b] ® If you are continuing your row of Deck Lights from
earlier, ensure that this Extension Cable is long enough to reach from your
first Connection Tee, to your next empty deck light space
2. Join the Connection Tee [c] from your second pack of Deck Lights to your
second Extension Cable
3. Install your second set of Daisy-Chain Deck Lights [d] and End Deck Light
[e] as per the previous steps on page 10
4. If you are ending your lighting system here, ensure to attach the
weatherproof end cap [f] onto the end of your Connection Tee
® To expand your lighting system further, join additional Extension Cables,
Expansion Tees or Connection Tees to your second Connection Tee
Specifications
45mm Warm White Deck Lights
Input Light Output Pack Output Size Height Drill Bit Size Brightness Beam Reach Colour Temperature Beam Angle Lifespan Waterproof Rating Connection Housing Deck Light Cable Length Deck Light Cable Diameter Leader Cable Length
12 V 1w per light 6w total ø45mm 26mm 30mm 75 lm 2m max ~3000k 120º 50,000 hrs IP67 2-Pin Plug + Socket Stainless steel and polycarbonate 1800mm 10mm 900mm
Warranty
2 Year Replacement Guarantee
Holman Industries offers a 2 year replacement guarantee with this product.
In Australia our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
As well as your statutory rights referred to above and any other rights and
remedies you have under any other laws relating to your Holman product, we
also provide you with a Holman guarantee.
Holman Industries guarantees this product against defects caused by faulty
workmanship and materials for 2 years domestic use from the date of purchase.
During this guarantee period Holman Industries will replace any defective
product. Packaging and instructions may not be replaced unless faulty.
In the event of a product being replaced during the guarantee period, the
guarantee on the replacement product will expire 2 years from the purchase
date of the original product, not 2 years from the date of replacement.
To the extent permitted by law, this Holman Replacement Guarantee excludes
liability for consequential loss or any other loss or damage caused to
property of persons arising from any cause whatsoever. It also excludes
defects caused by the product not being used in accordance with instructions,
accidental damage, misuse, or being tampered with by unauthorised persons,
excludes normal wear and tear and does not cover the cost of claiming under
the warranty or transporting the goods to and from the place of purchase.
Should you suspect your product may be defective and need some clarification
or advice please contact us directly:
1300 716 188 [email protected] 11 Walters Drive, Osborne Park
6017 WA
If you are certain your product is defective and is covered by the terms of
this warranty, you will need to present your defective product and your
purchase receipt as proof of purchase to the place you purchased it from,
where the retailer will replace the product for you on our behalf.
Thanks for being a #SMARTGARDENER
We really appreciate having you as a customer, and would like to say thank you
for choosing us.
We recommend registering your new product on our website. This will ensure we
have a copy of your purchase and activate an extended warranty. Keep up to
date to with relevant product information and special offers available through
our newsletter. www.holmanindustries.com.au/product-registration/
Copyright © 2021 Holman Industries