SIIG CE-H27411-S1 HDMI USB KVM Over Cat6 70m Extender User Manual

SIIG CE-H27411-S1 HDMI USB KVM Over Cat6 70m Extender

Features

• Support HDMI 1.3, 1080p@60 4:4:4 8bits, Support HDCP 1.2
•  Extend 1080p@60 video up to 230ft/70m through a Cat6/6a/7 network cable Support Audio EDID learning
• Support HDMI loop-out on Transmitter
• Support audio extraction via L/R 3.5mm of Receiver HDMI Audio Format: PCM2/5.1/7.1, Dolby & DTS 5.1
• 3.5mm Audio Format: PCM2
• Support USB 2.0 extend for keyboard & mouse only Lightning Protection, Surge Protection, ESD Protection

Package Contents

• Transmitter
• Receiver Power adapter DC SV/1 A x2
• USB cable
• User Manual

Layout

Transmitter (TX)

1. Reset BUTTON: Press to restart the device
2. RJ-45: Connect to Receiver with Cat6 cable
3. USB port: Connect to the USB port of the PC for receiver’s Keyboard & Mouse use.
4. KVM Light: always on when connect to the hot flashes when the mouse /keyboard using
5. Power/Signal LED: flashes when no HDMI signal is always on when HDMI signal is transmitted.
6. POWER JACK: DC 5V/1A
7. HDMI OUTPUT: Connect to HDMI display
8. HDMI INPUT: Connect to HDMI source

Receiver (RX)

1. Reset BUTTON: Press to restart the device
2. RJ-45: Connect to Transmitter with Cat6 cable
3. USB port: For keyboard & mouse only Support wireless keyboard & mouse
4. KVM Light: always on when connect to the hot flashes when the mouse /keyboard using
5. Power/Signal LED: flashes when no HDMI signal is always on when HDMI signal is transmitted.
6. POWER JACK: DC 5V/1A
7. L/R 3.5mm Output: For audio extract. support PCM 2ch only do not support the digital audio format
8. HDMI OUTPUT: Connect to HDMI display

Audio EDID Learning

•  The extender will auto-learning the audio EDID from the connected display to support display’s audio format ..
• If the TX loop-out connected display also, the device will use the smaller audio EDID of two displays.

For example

1.  Two displays are Digital 5.1 & PCM 2.0, the extender will use PCM 2.0. Two audio output formats will be PCM 2.0.
2. Two displays are PCM 7.1, the extender will use PCM 7.1. Two audio output formats will be PCM 7.1.

Application

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>