BluMill Air Matress Built-in Electric Pump User Guide

Table of Contents

BluMill Air

Important

Household use only.
The voltage used must be AC 110-120V for US/CA, AC 220V-240 for EU/UK.
This pump cannot be used continuously for more than 10 minutes.
Keep the pump out of reach of children.
Keep the air inlet/exhaust ventilation unblocked at all times.
To reduce the risk of fire and electric shock, do not use the pump to fan speed control valves or other equipment.
When the pump is not in use, please unplug the power supply.
This pump has to limit temperature protection. If the pump has been working for a long time, it will automatically shut off to protect it from overheating. Please allow it to cool down for 5 minutes before your next use.

Warning

To reduce electrical risk, please contact a qualified electrician for repairs.
Refer to this guide when using the pump to inflate inflatable items.
Do not leave the product unattended when in use. Do not use it in wet conditions.
Keep inflation and deflation ports free of debris when in use.
When the pump is working, do not look directly into the inflation or deflation ports.
Do not attempt to put hands or fingers inside the inflation or deflation ports at any time.
Do not disconnect the power cord with wet hands.
When the product is not in use, turn it off and unplug it from the power source.
If the product is damaged, especially if the power cord is damaged, please stop using the pump. Do not put liquid in the pump.
The pump requires regular maintenance.
To prevent melting, do not use the product near hot objects, such as an electric stove or oven.
Stop using the pump for at least 5 minutes after 10 minutes of continuous use.
This appliance can be used by children aged 8 and older and persons with reduced physical, sensory or mental capabilities or a lack of experience and knowledge if they have been given supervision or instruction on how to use the appliance safely and understand the hazards involved.
Children should be supervised to ensure that they do not play with the appliance.
If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

Unroll the bed in a flat, clean area. Make sure the indented side is facing up and the other side is on the floor.
Open the cord storage holder; plug it into a power source. Turn the knob clockwise to the INFLATE position. It takes 3 to 5 minutes to inflate.
When the airbed is fully inflated, turn the knob counterclockwise to OFF to shut off the motor. Put the cord back into the cord holder.

BluMill Air Matress Built-in Electric Pump Fig1

To deflate, make sure nothing is on top of the mattress. Take out the cord and plug it into a power source. Turn the knob counterclockwise to the DEFLATE position.
When finished, rotate the knob to OFF and put the cable back into the cord holder.
Open the air valve to let the remaining air out, then roll the bed up for easy storage.

BluMill Air Matress Built-in Electric Pump Fig1

Turn off the pump after the inflation.
Find the hole by listening for the sound of air being released or looking for bubbles after applying soapy water. Allow the mattress to deflate.
Carefully clean the repair area and let it dry.
Cut a round or oval patch and use adhesive to patch the hole. Ensure a complete seal.
Smooth it out with a heavy object.
Place a heavy object over the patched area for 24 hours, then inflate and the repair is completed.