AUBIKA Excellence Head Strap with Battery User Guide
- June 9, 2024
- AUBIKA
Table of Contents
AUBIKA Excellence Head Strap with Battery
Safety & Warranty Guide
- Step 1 Attach the Rear Brace to the Strap Clip the rear brace into the strap according to the corresponding R and L letters- you will hear a clear “click” as it attaches.
- Step 2 Install the Top Strap Thread the top strap through the bracket of the rear brace. Smooth side down.
- Step 3 Pull Out the Facial Interface Remove the facial interface from the Quest 2 headset.
- Step 4 Attach Side Straps Hook the strap sides to the arms of the headset snap on by applying pressure down.
- Step 5 Thread and Fasten the Top Strap Thread the top strap through the bracket in the front of the Quest 2 to fasten it.
- Step 6 Re-insert the facial interface and snap it into place.
Simultaneous Charging
To charge the Quest 2 headset and head strap battery at the same time, make
sure to connect the battery cable from the strap to the headset’ s USB-C port,
and press the power button once after plugging it into the charger.
Power
button is designed for activating the smart charging on the Quest 2. To charge
the strap individually, leave the power button in the off ” position after
plugging it into charge.
Extended Straps Ends Makes for Easier Setup and Removal
Wearing Show
Friendly Note: We suggest leaving the strap plugged into the Quest 2 all the time. Turn on the strap when playing Quest 2, turn the strap off when not playing
Product Electrical Specifications
Name: Aubika Excellence Strap
Model: YJ-582A Input:5VDC, 2A
Output: 5VDC, 2A
Typical Battery Capacity: 5000mAh/18.5Wh
Operating Temperature: 0-40°C/32-104°F, min. humidity 596, max humidity
959% RH (non-condensing)
WE ARE HERE FOR
YOu For FAQs and more information
HEALTH& SAFETY WARNINGS
WARNING
To reduce the risk of personal injury, discomfort or property damage, please
ensure that all users of theses accessories carefully read the warnings below.
- It is important that you carefully read the Health and Safety Guide enclosed with your VR headset in addition to these warning before using your VR system.
- Read and follow all setup and operating instructions provided with the headset. Follow instructions for installing the Excellence Strap With Battery on your headset.
- These accessories are not toys and should not be used by children under the age of 13.
- To avoid transferring contagious conditions (like pink eye), do not share the headset or either of these accessories with persons with contagious conditions, infections or diseases, particularly of the eyes, skin, or scalp. The headset and accessories should be cleaned between each use with skin-friendly non-alcohol, non-abrasive antibacterial wipes. Replace the battery-powered Excellence Strap if it becomes worn or cannot be cleaned.
- The headset and the Excellence Strap With Battery are worn next to your skin and scalp. Stop using the headset if you notice Swelling, itchiness, skin irritation, loss of hair or other skin reactions. If symptoms persist, contact a doctor,
Safety Guidelines
WARNING
- DONOT allow the product to come into contact with any kind of liquid. DO NOT leave the product out in the rain or near a source of moisture. DO NOT drop the product into water. If the inside of the battery comes into contact with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may even lead to an explosion.
- Put out any product fire using water, sand, fire blanket, or a dry powder fire extinguisher.
- The product should be used in temperatures from 0’C to 40°C (32°Fto 104F), Use of the product in environments above 40°C (104 F) can lead to a fire or explosion. Use of the product below 0 C (32″F can lead to permanent damage.
- Never disassemble or pierce the product in any way or the battery may leak, catch fire, or explode.
- DONOT drop or strike the product DO NOT place heavy objects on the product
- DO NOT heat the product. DO NOT put the product in a microwave oven or in a pressurized container.
- DONOT Leave the product near heat sources such as a fumie or heater. DO NOT leave the product inside of a vehicle on hot days. The ideal storage temperature is 22°C to 28°C(72’Fto82″‘F).
- DO NOT store the product fully discharged for an extended period. Otherwise, it will over discharge, which will lead to permanent damage.
- DO NOT attempt to charge or use the headset or Excellence Strap With Battery if it does not turn on after attempted charging, if it gets abnormally warm when it is used or charged, or if the battery compartment is swollen, leaking liquid, or smoking
- Always ensure that the headset and Excellence Strap With Battery have adequate ventilation and air flow while in use or charging. Covering the headset or Excellence Strap with Battery with materials that significantly affect air flow may affect performance and poses a possible risk of fire or explosion.
Headset Temperature
WARNING
important to check the temperature of your headset and Excellence Strap With
Battery as some contact points-including front surfaces-may get hot. It is
normal for your headset or Excellence Strap With Battery to feel warm to the
touch while in use or while charging. Prolonged skin contact with a headset or
Excellence Strap With Battery that is hot where it touches the skin may
produce skin discomfort or redness, or low-temperature burns. If your headset
or the Excellence Strap With Battery feels hot to the touch or is
uncomfortably warm, stop using or charging it and allow it to cool down.
WARNING
To reduce risk of electric shock:
- Do not modify or open any of the components provided.
- Do not charge this device if any part of the AC Adapter cable is torn, any wires are exposed, or battery compartment damaged.
- Do not insert any metal, conductive, or any foreign objects into the charging port.
- Do not expose the device to water or fluid.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>