MISSOMA 18ct Lucy Williams Square Signet Ring User Guide

MISSOMA 18ct Lucy Williams Square Signet Ring

Product Information

Specifications:

• Material: Paper
• Compatibility: Any ring of similar style and bandwidth
• Requirements: Printer, Credit Card, Ring

Product Usage Instructions

Using Internal Diameter:

1. Measure the internal diameter of a ring you own that fits well.
2. Match the diameter with the corresponding ring size from the provided chart.

Using Ring Sizer:

1. Measure lines A and B on the document to ensure the correct printing size.
2. Cut along the serrated lines and slit on the ring sizer template.
3. Fold the sizer in half lengthways and cut along the serrated edge for a perfect slit.
4. Insert the end of the sizer through the slit and place it on the finger for sizing.
5. Adjust for comfort and note down the corresponding size from the table.

FAQ:

• Q: Can I use any type of ring for this guide?
  A: It is recommended to use a ring with a similar style and bandwidth to ensure accurate sizing.

• Q: What if my measurement falls between two sizes?
  A: It is suggested to choose the larger size for maximum comfort.

• Q: Do I need any special tools for using this guide?
  A: You will need a printer, a credit card, and a ring of your own to utilize this ring sizing guide effectively.

PRINTABLE RING SIZE GUIDES

Find your ring size with these two easy-to-use tutorials. All you need for these two hacks are a printer, a credit card and a ring of your own. Just a little tip, make sure to use a ring in a similar style with a similar band width to the ring on your wish list.

First, print this document out ensuring the page scaling is set to 100% for a full A4 page. When printed, grab a credit card and place it over the below shape. It should fit exactly into the shape.

USAGE INSTRUCTION

METHOD 1 – USE A RING YOU OWN

1. STEP 01
   Measure the internal diameter (illustrated below) of a ring you own that mirrors the fit you want for your new piece. Then match it with the right ring size in step 03.

2. STEP 02
   Place the place the band of your ring on the chart below and match the inside edge to the nearest size circle. The circled letter that best fits your ring is your ring size. Falling somewhere in between two sizes? We suggest you opt for the larger for maximum comfort.

METHOD 2 – PRINT YOUR RING SIZE

• STEP 01
  Measure the lines marked A and B. This will confirm you’ve printed the document to be the right size.

• STEP 02
  Cut around the ring sizer’s serrated lines and the slit at the top. A little tip for cutting your slit: fold your ring sizer in half (lengthways) then cut along the serrated edge. When you unfold your sizer you’ll have a perfect line.

• STEP 03
  You’re almost there. Now just push the opposite end of your sizer through the slit and then place on the finger you’d like your new ring to be placed on. Adjust to fit and make sure it can slide on and off comfortably.

• STEP 04
  Check the line and make a note of your letter,then match up with our table. This is your ring size.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>