Saramonic SR-WM2100 2.4GHz Dual Wireless Lavalier Microphone System User Manual

Saramonic SR-WM2100 2.4GHz Dual Wireless Lavalier Microphone System User Manual

Thank you for choosing Saramonic!
The Saramonic SR-WM2100 is a compact and portable 2.4GHz dual wireless Cavalier microphone system. Designed for DSLR, Mirrorless and video cameras, as well as smartphones and tablets it is ideal for broadcast TV, electronic news gathering (ENG), interviews and content creation of all kinds. It features an operating range of up to 70m in open areas.

Statement

Please read this manual carefully before using and strictly operate and store in accordance with the instructions. Please save the manual for your future reference.

If the user manual can not help you to solve certain problems, please consult with your retailer for help or email us: info@Saramonic.com.

Available Kits

1xSR-WM2100 RXU (USB-A adapter included)

SR-WM2100 U2| 2  SR—WM2100 TX

1SSR-WM2100 RXU (USB-A adapter included)

5 -WM2100| 2xSR-WM2100 TX

1xSR-WM21 00 RR

1SSR-WM2100 RXU (USB-A adapter included)

Portable Receiver (SR-WM2100 RX)

Introduction

The SR-WM21 00 RX is a camera-mountable wireless receiver. It features level control, headphone monitoring, automatic pairing with transmitters, and Mo output cables, TRS for cameras and TRRS for mobile devices.

Equipped with an auto-scan function, the RX automatically selects an available transmission frequency with the best signal.

Product Structure

1. Antenna
   Screw clockwise to install.
   Screw counter clock wise to dismantle.
   Adjust the antenna accordingly to get the best sound reception.
   Please do not touch the antenna during recording to avoid interfering with the signal.

2. LED Indicator

   ---

Made

|

Indicator Status

---|---

Unpaired

|

Fleshing blue light

Paired successfully

| Solid blue light
Low battery level|

flashing red light

3. Headphone jack
   3.hmm stereo mini headphone output.
   Connect headphones to monitor the wireless system’s audio

4. Line out jack
   1 -Connect the RX receiver to a Camera, recorder or mixer with the supplied 3.5 mm
   TRS output cable. 2-Connect the RX receiver to m a smartphone, tablet or computer with the supplied 3.5mm TRS (CTIA standard) output cable.

5. Power button (OFF/ON Switch)
   Slide the power button to ON, turn on the RX receiver.
   Slide the power button to OFF, turn of the RX receiver.

6. Battery compartment
   Operates on two AA batteries (not included),

7. + or – button
   Audio output level controls.
   The setting is retained even after the power is turned off.

8. Standard cold shoe mount

9. Pairing pinhole

Accessories installation operation

1. Connect the supplied cable to the line output jack
   When connecting to a camera, recorder or mixer, please use the 3.5mm TRS to TRS output cable. Plug one end into the line output jack of the receiver and plug the other end into the mic input jack of the camera, recorder, or mixer.

When connecting to a smartphone, tablet or computer, please use the 3.5mm TRS to TRRS (CTIA standard) output cable. Plug the 90 degree right angle TRS into the line output jack of the receiver and plug the straight TRRS end into the 3.5mm headphone jack of a smartphone, tablet, or computer.

2. Attach the shoe-mount adapter
   Attach the shoe-mount adapter to the receiver, and secure it on your camera’s shoe- mount or rig.
   

Portable Receiver (SR-WM2100 RXU)

Introduction

SR-WM2100 RXU is a wireless receiver with a USB-C output connector. It features a dedicated headphone output to monitor audio real-time sound. The M/S switch allows you to select either mono or stereo output to your device. Also included is a USB-C to USB-A adapter, making the SR- WM2100 RXU compatible with Android Smartphones or Ta6lets and most Computers.

Product Structure

1. Type-C Connector
   Suitable for USB-C devices (equipped with a USB-C to U$B-A adapter, also compatible with USB-A devices).

2. LED Indicator

   ---

Mode

|

Indicator status

---|---

Unpaired

| Flashing blue light
Paired successfully|

Solid blue light

Note: Please make sure that the receiver is fully plugged into your device before checking the indicator status.

3. + or – button (Pair button)
   Audio output level controls.
   (The setting is retained even after the power is turned off.)
   Press the Pair button (press the + button and – button at the same time) to enter pairing mode.

4. M/S Switch
   The output mode can be set to either mono or stereo.

5. Headphone Output
   3.Smm stereo headphone output.
   Connect headphones to monitor the wireless system’s audio output.

Accessories installation operation

1. Connect to a USB-C device

2. Connect to a USB-A device
   

3. Connect the USB-A adapter to the SR-WM2100 RXU Type-C connector as shown.

4. Connect the SR-WM2100 RXU to a computer as shown.
   

Body pack launcher (SR-WM21 00 TX)

Introduction

The SR-WM2100 TX is a compact wireless belt pack transmitter that features dedicated 3.5mm Microphone and Line-Level input connectors, an adjustable antenna for best possible wireless transmission and easy pairing with receiver.

Product Structure

1. Antenna
   Screw clockwise to install.
   Screw counter
   Adjust the antenna accordingly to get the best sound transmission.
   Please do not touch the antenna during recording to avoid interfering with the signal.

2. LED Indicator
   ** Mode| Indicator Status**
   ---|---
   Unpaired| Flashing blue light
   Paired successfully| Solid blue light
   Low battery level| Flashing red light

3. Line-Level Input
   Connect to line-level output of audio devices.

4. Microphone Input
   Connect to the supplied 3.5mm Cavalier microphone.

5. Power Button (OFF/ON switch)
   Slide the power button to ON, turn on the RX receiver.
   Slide the power button to OFF, turn off the RX receiver.

6. Battery compartment
   Operated on two AA batteries (not included).

7. + or – button
   Microphone and Line-Level input level control.
   The setting is retained even after the power is turned off.

8. Belt clip

9. Pairing pinhole

Accessories installation operation

1. Connect microphone
   Connect the supplied 3.5mm lavalier microphone into the microphone input or connect an audio device’s line-level output into the 3.5mm line-level input of transmitter.

2. Clip the transmitter on your belt, or put it in your pocket.

Battery Installation

SR-WM21 00 TX and SR-WM21 00 RX both need two AA size batteries.

• Press the two catches inward and pull out the battery compartment.
• Insert two AA size batteries according to the polarity indicators and close the compartment.
• Please make sure the battery compartment is locked securely.

Cautions on battery use

Please make sure to follow the several points when install batteries:

• Make sure the batteries are inserted correctly according to the polarity indicators.
• It is suggested to replace both batteries at the same time.
• Please do not use two batteries from different brands together as a combination.
• Remove the batteries from the battery compartment when the device is not used for an extended period of time.

Operation Guide

Operation Guide For SR-WM2100 & SR-WM2100X

1. Slide the power button to ON, turn on both the transmitter and receiver.

2. Transmitter and Receiver pairing.
   Before leaving factory, the system has been paired successfully.
   If they are disconnected or unpaired, please see below for pairing instructions:

   • Pull off the belt clip, as image below illustrates, and you will notice the pairing pinhole on oath transmitter and receiver.
   • Using the supplied pairing pin, insert into the small pinhole on both receiver and then transmitter{s) in quick succession. When pairing is successful, the indicators turn solid blue.
     

3. Connect the receiver to the mic input of a camera, mixer or recorder with the TRS to TRS cable, or the headphone port on a smartphone, tablet or computer with the TRS to TRRS cable.

4. Plug headphones into the receiver to monitor the recording audio if your camera or device lacks a headphone output.

5. You are ready to record.
   Note: Due to 2.4GHz wireless frequency, signal can be easily attenuated. Please try to avoid obstacles, such as walls and buildings, and avoid close proximity to devices with .4 Hz signal, such as high-power wifi antennas, smartphones with wifi in use, radios, etc.

Operation Guide For SR-WM2100 U1, SR-WM2100 U2 & SR-WM2100X

1. Slide the power button to ON, turn on the transmitter.

2. Plug the RXU into an USB-A / Type-C device.

3. Transmitter and Receiver pairing
   Before leaving factory, the system has been paired successfully. If they are disconnected or
   unpaired, please see below for pairing instructions:

   • Pull off the belt clip, as shown in the picture of Page 12, and you will notice the pairing pinhole on the transmitter.
   • Using the supplied pairing pin, insert into the small pinhole on the transmitter. VVhen the transmitter indicator flashes rapidly, press the RXU Pair button (press the + button and – button at the same time) to enter pairing mode. When pairing is successful, the indicators turn solid blue.

4. Plug headphones into the receiver to monitor the recording audio.

5. You are ready to record

Specification

Sft-WM2100 TX

SR-WM2100 RX

SR- WM2100 RXU

Packing List

• SR-WM21 U1
  • SR-WM2 100 TX xl
  • SR-WM2100 RXU x1
  • Type-1 o USB-A adapter x1
  • Omnidirectional Cavalier
  • microphone x1
  • Microphone cli p x 1
  • Antenna xl
  • Belt clip x1
  • Foam windscreen x1
  • Pairing pin x 1
  • Warranty Card x1
  • User Manual x1
• SR-WM2100 U2
  • SR-WM2 T 00 TX x2
  • SR-WfVI71 00 PXU x1
  • Type-C to USB-A adapter xl
  • Omnidirectional lavalier
  • microphone x2
  • Microphone clip x2
  • Belt clip x3
  • Foam windscreen x2
  • Pairing pin x1
  • Warranty Card x1
  • User Manual x1
• SR-WM2100X
  • SP-WM2100 TX x2
  • SR-WM2 00 RX x1
  • SA- WM71 00 RXU x 1
  • Type-C to USB-A adapter x 1
  • Omnidirectional lavalier microphone x2
  • Microphone clip x2
  • Antenna x2
  • Belt clip x3
  • Foam windscreen x2
  • 3.5mm TRS audio output cable x 1
  • 3.5mm TRS to TRRS audio output cable x1
  • Pairing pin x1
  • Cold shoe mount x1
  • Warranty Card x1
  • User Manual x1

For better recording experience, the application Smart Reoorder s recommended.

Scan the QR code and follow us!

Shenzhen Jlayz Photo lnduatrial., Ltd

AT 6 Building, Intelligent Terminal Industrial Park of Silicon Valley Power, Guanlan, Longhua District, Shenzhen, China

400-613-1096
 www.saramonic.com
info@saramonic.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>