innr RC21x Smart Lighting Installation Guide
- June 6, 2024
- innr
Table of Contents
RC21x
Installation
Option1
Option2
installation
| |
---|---|---
Remove the plastic tab.| Open the Inner App and make sure your Inner
Bridge is connected.| Press “+” and “Add Device”.
| |
Scan the QR-code on the remote.| Press “Next step’ to start searching
for the device(s).| Follow the further instructions in the app.
INstallation without Inner bridge
For direct use with smart lights (without Inner Bridge) or with a third party bridge please visit: www.innr.com/service
Button overview
• Short press: On / Off
Factory reset
Press and hold the reset button for 3 seconds.
Important safety instructions
- For indoor use only.
- Do not disassemble the product: if any part is damaged, the product should not be used.
- Do not immerse in water.
- For cleaning, use a damp cloth, never a strong cleaning
- Keep these instructions for future use.
Declaration of Conformity
Hereby, Inner Lighting BV declares that the radio equipment types RC 210 are
in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet
addresswww.innr.com/en/downloads
Zigbee Frequency: 2.4 GHz (2400 – 2483.5 MHz) – RF power max 10 dBm
INNR IM RC 210-X253-Pantone 276C
Documents / Resources
| innr
RC21x Smart
Lighting
[pdf] Installation Guide
RC21x, Smart Lighting, RC21x Smart Lighting
---|---