Hoyz Collection Hanglamp Armor Down Light Instructions

Table of Contents

Specifications

Safety Instructions

Before using the luminaire, please ensure to follow these safety instructions:

Power Supply

Connect the luminaire to a suitable power source according to the following guidelines:

If the luminaire is double insulated (Protection Class 2), do not connect it to Earth.
If the luminaire is designed for a very low voltage supply, ensure to use the correct voltage (eg, 12V).

Lamp Compatibility

Use only lamps that are suitable for this luminaire and adhere to the maximum specified wattage.

Disposal

Do not dispose of the luminaire with household refusal. Contact your retail outlet for proper disposal methods.

Q: Can this fixture be used outdoors?
A: No, this luminaire should only be installed indoors.
Q: What should I do if I exceed the maximum specified wattage?
A: Ensure you only use lamps that are within the maximum wattage specified for this luminaire to prevent damage.

Below you will find all explanations with numeric reference to the icons.

This luminaire should only be installed indoors.
This luminaire is suitable for fixing to normal flammable surfaces.
This luminaire is not suitable for fixing flammable surfaces.
Protection class 1: the luminaire has an earthing connection. The earth wire has to be connected to the clip marked with .
Protection class 2: the luminaire is double insulated and must not be connected to an Earth.
Protection class 3: the luminaire is only suitable for very low voltage supply (e.g. 12V.)
Max. … W: only use lamps suitable for this luminaire and keep within the maximum specified wattage.
The luminaire cannot be discharged together with the household refuse. Please contact your retail outlet for the right manner of discharge.

Always isolate the power before commencing installation, repair, or maintenance.
If in doubt about the installation, repair, or maintenance,consult a qualified electrician or contact your retail outlet.
Always tighten the terminal screws firmly, especially the attachment for low voltage wiring (12V)if applicable.
Observe the correct color of the wiring before installation: blue(N), brown or black(L), yellow-green (Earth.)
If the luminaire is mounted on a metal surface, this surface must be bonded to the protective earth conductor or the equipotential bonding conductor of the installation.
If you want to dim the luminaire (if there is no dimming device installed)please be sure you use the right type of dimming device. In doubt always consult a qualified electrician or contact your local retail outlet. The manufacturer cannot be held responsible in case of usage of the wrong type of dimming device.
If the luminaire is mounted onto a ceiling box or wall box, it is obligated to cover the box with a lid first. In case the luminaire is not mounted directly under the ceiling box, be sure to use a solid fixing hook. If in doubt about the fixing hook, or which patch to use,consult a qualified electrician or contact your retail outlet.
Always consider all the technical specifications of the luminaire.