innr RCL240-T Smart Round Ceiling Lamp Installation Guide
- June 3, 2024
- innr
Table of Contents
innr RCL240-T Smart Round Ceiling Lamp
SPECIFICATION
INSTALLATION
Factory Reset
Switch the light off and on 6times, with each off and on interval between
0.5-1second. After the 6th time on it will blink twice to indicate it is
factory reset.
Connection
To connect the lamp to the bridge, follow the instructions in the mobile app.
Important safety instructions
- For indoor use only.
- Do not disassemble the product; if any part is damaged, the product should not be used.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a simil ar qualified person.
- Do not immerse in water.
- For cleaning, use a damp cloth, never a strong cleaning agent.
- Keep these instructions for future use.
Declaration of Conformity
Hereby, Ihnr Lighting BV declares that the radio equipment types RCL 24xXT are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.innr.com/en/downloads
Frequency : 2.4 GHz (2400 2483.5MHz) –
RFpower : max. 10 dBm
www.innr.com Innr Lighting B.V. 2021
Model RCL 240 T,Voltage 220-24Ov, Voltage Frequency 50/60Hz, Power 28W, Rated
Current 190mA, Power Factor (PF) O.9
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>