innr RS229-T4 Comfort Spot Wit GU10 Set Instruction Manual
- June 4, 2024
- innr
Table of Contents
RS229-T4 Comfort Spot Wit GU10 Set
Instruction Manual
© Innr Lighting B.V. 2018
www.innr.com
To connect the lamp to the bridge, follow the instructions in the mobile app.
Factory-reset: switch the lamp OFF and ON six times (6x) with intervals of 0,5
seconds.
The lamp will blink to indicate it is the factory reset. It can then be
connected to a bridge again.
Important safety instructions
- For indoor use only.
- Do not disassemble the product; if any part is damaged, the product should not be used.
- Do not immerse in water.
- For cleaning, use a damp cloth, never a strong cleaning agent.
- Keep these instructions for future use.
Declaration of Conformity
Hereby, Inner Lighting BV declares that the radio equipment types RB 26x, BY
26x, RB 27x T, BY 27x T, RB 28x C,
BY 28x C, RB 24x, RB 24x T, RS 22x, RS 22x T, and RS 23x C are in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
www.innrlighting.com/en/downloads
Frequency: 2.4 GHz (2400 ~ 2483.5MHz) – RF power: max. 10 dBm
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>