innr RC210 Smart Button Instruction Manual
- June 4, 2024
- innr
Table of Contents
innr RC210 Smart Button Instruction Manual
Installation
Option 1:
Option 2
-
Remove the plastic tab.
-
Open the Innr App and make sure your Innr Bridge is connected.
-
Press “+” and “Add Device”.
-
Scan the QR-code on the remote.
-
Press “Next step” to start searching for device(s).
-
Follow the further instructions in the app.
Installation without Innr bridge
For direct use with smart lights (without lnnr Bridge) or with a third party bridge please visit: www.innr.com/service.
Button overview
Short press: On/Off
Double click: scenes
Long press: Dim up/Dim down
Factory reset
Press and hold the reset button for 3 seconds.
Important safety instructions
- For indoor use only.
- Do not disassemble the product; if any part is damaged, the product should not be used.
- Do not immerse in water.
- For cleaning, use a damp cloth, never a strong cleaning agent.
- Keep these instructions for future use.
Declaration of Conformity
Hereby, Innr Lighting BV declares that the radio equipment types RC 210 are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.innr.com/en/downloads Zigbee Frequency: 2.4 GHz (2400 – 2483.5 MHz) – RF power: max 10 dBm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>