innr 2AVYZAE2NNM LED Lamp Instruction Manual

innr 2AVYZAE2NNM LED Lamp

Product Information

Specifications

• Models: AII AE, AF, AS and BE models (except AE 260, AE 280 C and BE 220)
• FCC Certification: Contains FCC ID: 2AVYZ- AE2NNM
• Compliance: FCC radiation exposure limits for an uncontrolled environment
• Minimum distance: 20cm between the radiator and any part of the body

Product Usage Instructions

Connection to the Bridge
To connect the lamp to the bridge, follow these steps:

1. Power on your device.
2. Press Next to start searching for devices.
3. Press + and Add Device for 30 seconds.
4. Scan the QR code on the bulb.
5. Device Added. Proceed with further instructions in the app.

Factory Reset
To factory reset the lamp:

1. Switch the lamp OFF and ON six times with intervals of 0.5-1 seconds.
2. The lamp will blink to indicate it has been factory reset.
3. It can then be connected to a bridge again.

FAQ

• Q: How do I reset the lamp to factory settings?
  A: To factory reset the lamp, switch it OFF and ON six times with intervals of 0.5-1 seconds. The lamp will blink to indicate it is factory reset.

• Q: How do I connect the lamp to the bridge?
  A: To connect the lamp to the bridge, follow the instructions in the related mobile app. Power on your device, start searching for devices, press + and Add Device for 30 seconds, scan the QR code on the bulb, and follow further instructions in the app.

Connection to the bridge

To connect the lamp to the bridge, follow the instructions in the related mobile app.

1. Press “+” and “Add Device”.
2. Scan the QR code on the bulb.
3. Power on your device.
4. Press “Next” to start searching for device (s).
5. Follow the further instructions in the app.

Factory-reset

Switch the lamp OFF and ON six times (6x) with intervals of 0,5-1 seconds. The lamp will blink to indicate it is factory reset. It can then be connected to a bridge again.

FCC

FCC Certification:
Contains FCC ID: 2AVYZ- AE2NNM

FCC Supplier’s Declaration of Conformity
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Supplier’s name: Innr Lighting B.V.
Supplier’s address (USA): IBRS 1232 Hilversum 1200 WB Netherlands
Supplier’s internet contact information: usaservice@innr.com
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Note: This device has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

CAUTIONS AND OPERATING INSTRUCTIONS

• CAUTION: RISK OF ELECTRIC SHOCK – DRY LOCATION USE ONLY.
• Not for use in totally enclosed or recessed fixtures.
• Not suitable for use with regular dimmers.
• This device is not intended for use with emergency exit fixtures or emergency lights.
• Only install in operating environments between 0°F – 100°F / -20°C – +40°C.
• Before replacing, turn off the power and let the device cool down to avoid burning.
• The device is for indoor use only.
• Do not immerse in water or use the device in wet locations, e.g. bathrooms or outdoors.
• For cleaning, use a damp cloth, never a strong cleaning agent.
• Do not clean the device when it is on and connected to the power supply.
• This device is not a toy, designed to be played with by children.
• Do not place this device on hot surfaces.
• For safety reasons, do not open this device, which will also void the warranty.
• Use the lamp only in a luminaire rated for this lamp.
• Dispose of this device by disposal laws in your area.

SPECIFICATION

Wireless specification:

• Wireless RF mode frequency band: 2400~2483.5 MHz
• Wireless communications protocol: IEEE 802.15.4
• Operating channels: channels 11 – 26

Environmental specification:

• Temperature (operation): -20°C – 40°C (0°F – 100°F)
• Temperature (storage): -25°C – 60°C (-10°F – 140°F)
• Relative humidity: 5-95 % non-condensing
• Standby power: < 0.2W per lamp

LIMITED WARRANTY

Innr warrants that this device will be free from defects in material and workmanship and will operate for 2 years based on up to 3 hours of average usage per day/7 days per week when used as directed. If this device does not conform to the warranty, Innr will send you, at its election, a replacement device or refund your original purchase price upon receipt of the returned device, register receipt and proof of purchase. Please send an email to service@innr.com to find out how to return the device. This limited warranty does not cover devices subject to accident, neglect, abuse, misuse or acts of God.

REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state and province to province.

© 2023 Innr Lighting B.V.
Models: AII AE, AF, AS and BE models (except AE 260, AE 280 C and BE 220)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>