ARGOX I4-Series I4-250 Industrial Barcode Printer Installation Guide
- June 5, 2024
- ARGOX
Table of Contents
14-Series / X-Series / G-Series
Printers Quick Installation Guide
http://www.argox.com/content2011.php?sno=0000670
I4-Series I4-250 Industrial Barcode Printer
-A-
- LCD Display
- READY Indicator
- MEDIA Indicator
- RIBBON Indicator
- FEED Button
- PAUSE Button
- CANCEL Button
- Front Acoess Door
- Top Access Door
-B-
- Parallel Port
- USB TypeB
- PS&2
- RS232 Serial
- Power Switch(O=Off, =On)
- AC power connector
- Ethemet
- USB Type A
- WiFi
- GPIO
-C-
- Ribbon Pick-up Spindle
- Ribbon Supply Spindle
- Media Supply Spindle
- Feed Slot
- Bracket
- Thermal Print Head
-D-
- Thermal Print Head
- Head Latch
- Paper Sensor Guide
- Paper Roller
Loading Ribbon | Loading Media |
---|---|
The user is cautioned that any changes or modifications not recommended by
Argox Information Co. Ltd. could result in the loss of the user’s uthority to
operate the equipment.
To ensure compliance, the users must use accessories and peripherals approved
by Argox Information Co. Ltd.
Supplemental Information: This device complies with the requirement of FCC Part 15 Rules. Operation is subject to the following two Conditions:
- This device may not cause harmful interference and
- this device must accept any interference received, including interference that may cause undesired operation.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada ICES-003 class A requirements.
X-Series & G-Series:
Srandards: UL 60950-1, ‘st Edition, 2007-10-31 CSA C22.2 No. 60950-1-03, 1st
Edition, 2006-07
14-Series:
Standards: UL 60950-1, 2nd Edition, 2014-1 0-14 CAN/CSA C22.2 No. 60950-1-07,
2nd Edition, 2014-10
X-Series & G-Series:
EMC: EN 55022:2010, class A
EN 55024: 2010
4-Series:
EMC: EN 55032:2012/AC:2013 Class A
EN 55024:2010
Argox Information Co., Ltd certifies that the following products and/or components are compliant with the current requirements of the European Union Restriction on the use of Hazardous Substances (RoHS) Directive, 201 1/65/EU.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
ATTENTION. RISQUE D’EXPLOSION SI LA BATTERIE EST REMPLACEE PAR UN MODELE
INCORRECT. JETEZ LES BATTERIES USAGEES SELON LES INSTRUCTIONS S’Y REFERANT.
Argox Information Co., Ltd
7F., No.126, Ln.235, Baoqgiao Rd., Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
Tel: +886-2-8912-1121 Fax: +886-2-8912-1124
Copyright © 2016. Argox Information Co. Ltd.. All Rights Reserved
Part No: 49-20007-007
Revision Date: Jul. 2016