BLAUPUNKT 359805 Plug In Heater Owner’s Manual

BLAUPUNKT 359805 Plug In Heater

IMPORTANT:
PLEASE READ ALL OF THE INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE REFERENCE.

IMPORTANT SAFETY INSTRUCTIONS

• When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons.

• Check the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the mains power supply.
  CAUTION : Some parts of this appliance can become very hot and can cause burns. Particular attention has to be given where children and vulnerable people are present.

• Children younger than 3 years old should be kept away from the appliance unless continuously supervised.

• Children aged from 3 years and less than 8 years should only switch on/off the appliance, provided that it has been placed or installed in its intended operating position and they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.

• Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Children should be supervised to ensure they do not play with the appliance.

• This appliance is not a toy.

• Children should not carry out cleaning or user maintenance without supervision.

• This product contains no user-serviceable parts. If the plug or any part of the appliance is malfunctioning or if it has been dropped or damaged, only a qualified electrician should carry out repairs. Improper repairs may place the user at risk of harm.

• Keep the appliance out of the reach of children.

• Keep the appliance away from heat or sharp edges that could cause damage.

• Keep the appliance away from other heat emitting products.

• Keep furniture, curtains and other flammable material at least one metre away from the appliance.

• Do not immerse the appliance or plug in water or any other liquid.

• Do not operate the appliance with wet hands.

• Do not use this appliance in the immediate surroundings of a bath, a shower or a swimming pool.

• This appliance must not be located immediately below a socket-outlet.

• Always unplug the appliance when not in use.

• Do not leave the appliance unattended whilst connected to the mains power supply or when in use.

• Do not use this appliance for extended periods of time.

• Do not use this appliance for anything other than its intended use.

• For indoor use only.

• This appliance is intended for domestic use only. It should not be used for commercial purposes.

• Do not block any air intake of the appliance; place in an open, well ventilated space.

• Do not attempt to move the appliance while it is in use.

• Do not put objects into any openings.

• Do not use the appliance with a programmer, timer, separate remote-control system or any other device that will switch the appliance on automatically, as there is a risk of  fire if the appliance is covered or positioned incorrectly.

• In order to avoid a hazard due to inadvertent resetting of the thermal cut-out this appliance must not be supplied through an external switching device such as a timer or connected to a circuit that is regularly switched on and off by the utility.

• Always unplug the appliance after use and before any cleaning or maintenance.

• Use of an extension cord with the appliance is not recommended.

• Never use accessories that are not recommended or supplied by the manufacturer. It could cause danger to the user and damage the appliance.

WARNING :
This appliance is not fitted with a device to control the room temperature. Do not use this appliance in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

HOT SURFACE:
Do not touch the hot section or heating components of the appliance.

WARNING:
In order to avoid overheating, do not cover he appliance.

Thermal Cut-out Device
The plug-in heater is fitted with a thermal safety cut-out device, built in to prevent it from overheat­ing. Should the plug-in heater start to overheat, the thermal safety cut-out system will automatically operate and the heat settings will switch off. If this happens:

STEP 1: Switch off the plug-in heater using the on/off switch.
STEP 2: Check that the plug-in heater is unplugged from the mains power supply and allow it to
STEP 3: Clear any blockages present on the vent, being careful not to damage the plug-in heater.
STEP 4: Plug in and switch on the plug-in heater at the mains power supply.

Caution: In order to avoid a hazard, due to inadvertent resetting of the thermal cut-out, this plug-in
heater must not be supplied through an external switching device such as a timer or connected to a circuit that is regularly switched on and off by the product.

Getting Started
Remove the product from the box. Remove any packaging from the product. Place packaging inside the box and either store or dispose of safely.
In the Box
500W Handy Plug-in Heater Instruction manual

Description of Parts

1. 500W Handy Plug-in Heater main unit
2. On/off switch
3. Control panel
4. Heat setting I button
5. Heat setting II button
6. LED temperature display
7. Power button
8. Timer button
9. Extraction grid
10. Vent

Instructions for Use

Before First Use
STEP 1: Check that there is no damage to the plug-in heater.
STEP 2: Plug the plug-in heater into a compatible socket at least 1 metre away from furniture,

curtains or any other flammable materials. Do not block the air intake on the back of the plug-in heater.

Note: When using the plug-in heater for the first time, a slight odour may be emitted. This is normal and will soon subside. Allow for sufficient ventilation around the plug-in heater.

Using the Handy Plug-in Heater

1. STEP : Plug in and switch on the plug-in heater at the mains power supply.

2. STEP : Press the on/off switch to the position (I). To turn on the plug-in heater, press'(!)’

3. STEP : Press’+’ to increase the temperature output; press’-‘ to decrease the temperature output. The temperature can be set between 15 °c and 30 °c.

4. STEP : To increase or decrease the fan speed, press’+’ and’-‘ at the same time. Press both buttons together once for a low speed setting; the LED temperature display will show ‘LL’. Press both buttons together twice for a high speed setting; the LED temperature display will show’HH’.

5. STEP: Activate the timer setting by pressing ‘6’; the display will change from ‘0C’ to ‘HOURS’.Press ‘6’. until the desired number of hours has been selected; 12 hours is the maximum selection.
   POWER OFF – If the timer function is set when the heater is on, the number of hours is set to when the heater will turn off.
   POWER ON – If the timer function is set when the heater is on standby, the number of hours is set to when the when the heater will turn on.

6. STEP: To switch off the plug-in heater, press ‘O’. Allow the fan to cool for approx. 60 seconds. Press the on/off switch to the off position (0) before unplugging the plug-in heater.

Note: The plug-in heater will only produce heat if the set temperature is higher than the room temperature.
Warning: Never leave the plug-in heater connected to the mains power supply whilst not in use.

Troubleshooting

heater is
operating. The fan is not| plugged in and switched on at| plugged in and switched on at the
running.| the mains power supply.| mains power supply.
| The thermal cut-out device| Unplug the plug-in heater from the
| has activated.

The fuse has blown.

| mains power supply and allow it to cool for approx. 15 minutes. Plug in

and switch on the plug-in heater at

| | the mains power supply before
| | trying again.
| | Unplug the plug-in heater from the
| | mains power supply and replace the
| | fuse with one that is the same amp.
No heat or light is being| There may be a problem with| Check the mains power supply by
emitted from the plug-in| the power supply to the| plugging in a working appliance.
heater.| plug-in heater.|

ERP Table

heaters only (select one)
Nominal heat output| **

p

nom

| 0.5| ****

kW

kW

kW

| Manual heat charge control, with integrated thermostat| ****

No

Nominal heat output (indicative)| ****

p nom

| ****

0.0

| Manual heat charge control with room and/or outdoor temperature feedback|

No

Maximum continuous heat output| ****

p max,c

| ****

0.5

| ****

Manual heat charge control with room and/or outdoor temperature feedback

| ****

No

Auxiliary electricity consumption| | Fan assisted heat output| No
At nominal heat output| elma,| ****

N/A

| ****

kW kW

kW

| Type of heat output/room temperature control (select one)
At minimum heat output| eml  n;| ****

N/A

| Single stage heat output an no room emperature control| ****

No

In standby mode

| ****

e l s”

| ****

0.00038

| Two or more manual stages, no room temperature control| ****

No

| | | | With mechanic thermostat room temperature control| No
| | | With electronic room temperature| Yes
| | | Electronic room temperature control plus day timer| ****

No

| | | Electronic room temperature control plus week timer| ****

No

| | | Other control options

(multipleselections possible)

| | | Room temperature control, with presence detection| ****

No

| | | Room temperature control, with window detection| No
| | | With distance control option| No
| | | With adaptive start control| No
| | | With working time limitation| Yes
| | | With black bulb sensor| No

CARE AND MAINTENANCE

Always unplug the electric heater from the mains power supply and allow it to cool sufficiently before performing any cleaning or maintenance. Wipe the exterior of the electric heater with a soft, damp cloth and allow to dry thoroughly. Do not use harsh or abrasive cleaning solvents or scourers, as these may damage the finish of the electric heater. Check regularly for any blockages on the vent, to prevent the thermal cut-out device from operating. Do not immerse the electric heater in water or any other liquid.

ELECTRICAL INFORMATION

(Fixed Mains Plug Only)
The mains lead supplied with this product is fitted with a B51363/ A 5 amp plug. If it is not suitable for your supply sockets it must be replaced with an appropriate plug.
If the plug becomes damaged and/or needs to be replaced please follow the wiring instructions on the next page. The plug removed must be disposed of immediately. It must not be plugged into a supply socket as this will be an electrical hazard. If the fuse needs to be replaced it must be of the same rating and ASTA approved to B51362. If the plug is changed, a fuse of the appropriate rating must be fitted in the plug, adapter or at the distribution board. If the fuse in a moulded plug is replaced, the fuse cover must be refitted before the application can be used.

WIRING INSTRUCTIONS

The supply cable will be either 2-core or 3-core. Follow the appropriate wiring instructions shown. In both cases ensure that the outer sheath of the cable is held firmly in place by the cable clamp.

ELECTRICAL INFORMATION

(Power adapters only)
Never open the power adapter, you risk getting an electric shock. Only use the power adapter that is supplied with your product. You must always connect the power adapter to the product before connecting to the mains power supply. The power adapter must be used indoors only, and must not be subjected to damp conditions. The power adapter does not have any user serviceable parts.

TECHNICAL SPECIFICATION

• Model Number:
  359805

• Voltage:
  220-240 V – 50 Hz

• Total heat power:
  500W

This appliance complies with the below listed EU Directives
2014/30/ EU Electromagnetic Compatibility Directive
2014/35/ EU Low Voltage Directive
2011 /65/ EU Restriction of Hazardous Substances

CUSTOMER SUPPORT

For all product support, please email:
customerservices@bmstores.co.uk

GUARANTEE

This product is guaranteed for twelve months from the date of original purchase. If any defect should occur due to faulty materials or workmanship, please return it to the store it was purchased from.
You will need to have your receipt of purchase to hand . The guarantee is subject to the following provisions:

• It is only valid within the boundaries of the country of purchase.
• The product must be correctly installed and operated in accordance with the instructions contained in the User Manual.
• The product must be used solely for domestic purposes.
• The guarantee will be rendered invalid if the product is re-sold or has been damaged by inexpert repair. The manufacturer disclaims any liability for incidental or consequential damages.
• The guarantee is in addition to, and does not diminish, your statutory or legal rights.

Imported by
B&M Retail Ltd. L24 8RJ. UK Centz Stores 7 Ltd, A94 K1H5, Ireland

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>