Moes ZT-SY-EU1S-WH-MS Scene Switch User Manual
- June 6, 2024
- MOES
Table of Contents
Moes ZT-SY-EU1S-WH-MS Scene Switch
Features
Product Introduction
- This scene switch is powered by a battery, which is developed under ZigBee/Bluetooth communication. After connecting with ZigBee/Bluetooth gateway and adding on Smart life App, it allows you to quickly “set the scene” for a particular room or living scene, like Reading, Movie, and so on.
- Scene switch is a time and energy-saving alternative to the traditional hard-wired switch, the push-Button It can be stuck on the wall or put on everywhere you like.
Specification
Input Power: CR 2430 button battery
Communication: ZigBee 802.15.4/BT Mesh
Dimension: 868613mm
Standby Power: 10uA
Working Temperature: -10℃~45℃
Working Humidity: <90%RH
Button lifecycle: 500K
Scene Switch with Your Smart Home
Installation
Open the cover then put the button battery in the battery slot. Press the
button on the switch, the indicator will turn on, which means that the switch
works correctly.
- Push the panel to the left
- Open the cover then put the button battery in the battery slot.
Fix it as Whereas You Want
Connection & Operation
- Indicator LED
Press the button, the indicator will turn on.
The indicator flash quickly means that the switch is under the process of the
network connecting.
- Scene Switch Operate
Each one button can be adapted up to three different scenarios through the APP
Single Click: Activate the 1st scene
Double Click: Activate the 2nd scene
Long Hold 5s: Activate the 3rd scene
Press and Hold Reset Button for 10s get into pair mode, LEDs will quick flash
APP Operation
- Search the App in the store or scan the QR code on the package/ manual to download and install the App.
- Register and login If you download for the first time, please click the “register” button to register your account. If you have an account, click the “login” button.
- Add devices
Note: If what you choose is the ZigBee or Bluetooth version, then a
ZigBee or Bluetooth hub is required for connection first before successful
pairing. Connect the device to the power supply, press and hold the Reset
Button to put the device into the network configuration mode, and ensure that
the mobile phone is connected to the network. Open the app, on the “smart
gateway” page, click “add subdevice”, and click “LED already blink”.
4. Wait for device networking to succeed, click “DONE” to add the device
successfully.
NOTE: if you fail to add the device, please move the gateway closer to
the product and reconnect the network after powering on.
5. After connecting the network successfully, you will see the Intelligent
Gateway page, choose the WIRELESS SWITCH 2 to enter the controlling page, then
choose“Add intelligence” enter to the setting mode.
6. Choose “Add condition” to choose the controlling condition, such as
“Single click”, the choose “Add task” choose the controlling action
7. Such as choosing the On/Off status of the switch
8. Save your collocation, then you could use the scene switch to control the
light
Follow us
Thank you for your support and purchase at we Moes, we are always here for your complete satisfaction, just feel free to share your great shopping experience with us.
If you have any other needs, please do not hesitate to contact us first, we will try to meet your demand.
WENZHOU NOVA NEW ENERGY CO., LTD Address: Power Science and Technology
Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone,
Yueqing, Zhejiang, China
Tel:+86-577-57186815
Email:service@moeshouse.com
AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China
References
- MOES Smart: Create Your Smart Life With Smart Home Devices
- MOES Smart: Create Your Smart Life With Smart Home Devices