LOTUS 50024 Outdoor Sports Watch User Manual

LOTUS 50024 Outdoor Sports Watch User Manual

Thank you for your purchase of this Lotus SmarTime watch.
This manual gives a full explanation of its operation and functions. Please note that Festina Lotus SA reserves the right to make changes to the contents of this manual without prior notice.

The product is not allowed to wear when shower or sauna. It can’t prevent from steam. Any ingress of water in the product due to non-compliance to the instruction is not covered by the warranty.

Charging guide

Magnetic charging is as shown below. Supports PC USB or 5V charger. It takes about 2 hours to fully charged.

Be aware that the two pins of the USB cable are not allowed to contact the conductor at the same time, or it will cause short circuit and burn.

Function of the buttons

Select button

Press to select/confirm; Long press to power on or power off.

Back button

Press to turn on/turn off the screen when on DIAL interface; Press to back to previous interface.

Connect to the APP

Download and install the APP

Scan the following QR CODE to download and install the APP

• Android Google play search” LOTUS Smartime” and install the following APP.

• iOS: Apple store search” LOTUS Smartime” and install the following APP.

All authorities for the APP need to accept during installation.

After installation, turn on “Lotus Smartime” and phone’s bluetooth, start prompt pop up, click to confirm. Click “Connect device”, enter into search device interface, find “Lotus S6” and select to connect. Some Android phones need to turn on GPS to find the device.

How to set message notification

phone’s settings-APP management, turn on all authorities of “Lotus Smartime”.

Enter into the phone’s Settings → Notifications → Lotus_smartime → Allow Notifications, Click the button to open the permission.

Start the APP “Lotus_smartime” → Device → App notification → Select permission accordingly.

How to operate if can not receive message push?

1. Firstly please confirm that the button for message push have already turned on at the mobile phone APP.
2. Please confirm whether messages can be displayed normally in the mobile phone notification bar. If there is no notification, please follow the instruction on how to set message notification to turn on the notification for phone APP.

Simple handling method for common problems

Due to the differences of different mobile phones, sometimes the Bluetooth connection between the mobile phone and the watch may be unstable. You can turn off the bluetooth of the mobile phone, forget the device and connect it again or restart the mobile phone, or restart the watch, restore factory settings, etc.

Shortcut function introduction

1. Swipe from left to right on the dial interface to view daily notification history. Follow the instruction to connect the bluetooth between the watch and mobile phone, you can receive mobile phone notifications.
2. Swipe from right to left on the dial interface to enter the heart rate testing.
3. Swipe the dial interface from top to bottom to enter the status bar interface (Bluetooth connection status / adjust screen brightness / power / time / data / torch / non-disturb mode).
4. Swipe the dial interface from bottom to top to enter the menu interface, slide up / down to select the icon, and touch or slide left to right to enter the corresponding function.
5. Long press the dial on the dial interface to enter the dial selection interface, you can slide left and right, and then short press the touch screen to select the dial.
6. Button function:
   Select button: Press to select/confirm. Long press to power on or power off. Back button: Press to turn on/turn off the screen when on DIAL interface; Press to back to previous interface.

Main functions introduction

Swipe from bottom to top on the dial interface to enter the menu interface, you can swipe up and down to select the function, touch or swipe from right to left to enter the secondary menu interface.

Multi-sports mode:

(walking, running, climbing, cycling, indoor run, free exercise)
Select the corresponding sport mode, tap the screen to enter the ready-to- start sport interface, and then tap directly to enter the corresponding sport mode; swipe the screen to the right to the save or end sport interface. Data will be sync to the APP when it is saved and the device connects to the APP. If you delete it, the APP will have no record.
GPS function: GPS is available for some sporting mode. Please still in open space when GPS is being activated. One green dot is flickering on GPS start interface at the same time. GPS smart watch vibrate and stop searching GPS signal when GPS activated, and then it enters into sporting mode automatically.

Notification:

the APP needs to obtain the SMS or other APP notification permission of the mobile phone first. Then the device can synchronize the latest 5 notifications from mobile phone.

Outdoors

• Altimeter: It shows an approximate altitude / height based on changes in air pressure. Real time height can be measured.
• Air pressure: Press to enter into the interface, the value indicates the current air pressure based on the built-in air pressure sensor.
• Ambient temperature: Enter into the interface to view the current ambient temperature. There is temperature difference between wearing on the wrist or non-wearing on the wrist because there is one built-in temperature sensor in this model.
• Compass: Click and move your wrist to align with the figure 8 to calibrate the compass until entering into the compass interface..
• Data: It can record steps, calories consumed and kilometers per day, and the data will be automatically cleared at 12 o’clock every night.
• Health management, remarks: no for medical reference.
• Heart rate: wear the watch close to your wrist. Click the icon, The real-time heart rate value can be measured in 15 seconds, and the screen will be off after 5 seconds.
• Blood pressure: When monitoring, please put your hands flat, the data will be confirmed after about 10 seconds.
• Blood Oxygen: holding this model tightly on the wrist and blood oxygen value will be measured.
• Sleep record: Your sleep duration and quality will be recorded every day from 9 o’clock PM to 9 o’clock AM in next morning to help you better adjust your work and rest time and improve sleep quality. View deep sleep, light sleep, and total sleep duration.
• Breath exercises: Click to enter and train your breathe according to the size of icon and vibration.
• Music: connect to the APP, turn on music in your mobile phone, click to enter into the music interface, then control mobile phone music (previous song, next song, start, pause function).
• Stopwatch: touch the icon or slide the icon from right to left to enter the function interface.

Ajustes

• Vibration: vibration that can be turned on or off to receive information.
• Wrist: raise your hand to brighten the screen, you can turn on or off the raise your hand to brighten the screen..
• Brightness: there are three level, low ,medium and high.
• Reset: click and confirm to delete the watch record to restore the factory settings..
• Power off: click and confirm to shut down the device.
• About: You can view the Bluetooth address and software version of the watch.

FAQ

Please avoid prolonged exposure of this device to extreme temperatures as it may cause permanent damage.

Why can’t I wear the watch to take a hot shower?
When the water temperature changes rapidly, water vapor or condensation is created. The water vapor is in the gas phase and the size of the molecular so minute so it can easily enter the watch. The internal circuit of the watch can then short-circuit, which may damage the circuit board of the watch and affect the functioning of the watch.

Why wont the watch turn on? Why won’t it charge?
If when you receive the watch and it does not power up immediately, it may be that a collision during the transport of the watch has affected the battery. Plug in the charging cable for activation.

If the battery level is too low, or if the watch has not been used for a long time and will not turn on, please plug in the charging cable and charge it for more than half hour to activate it.

Disclaimer

The method of capturing the heart rate through an optical sensor used by this LOTUS watch does not reach the level of precision and accuracy of a professional medical device, nor can it guarantee the equivalent stable readings. The watch cannot replace a medical device in its function of detecting or diagnosing pathologies, heart or other diseases.

Consequently and with respect to this function, the device is for recreational use only. Multiple factors (including level of skin contact, pigmentation, tattoos, sudden arm movements etc) can alter the accuracy of the data provided by the sensor. Please keep in mind that the actual heart rate may be higher or lower than the reading indicated by the optical sensor at a given time.

If you suspect any anomaly, always consult your doctor and in case of emergency, immediately contact the emergency services in your area.

Festina Lotus SA assumes no responsibility for any claim that may arise from the use and / or interpretation that the user of the device and / or third parties may make of the heart rate information provided by their devices.

By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and protecting our health.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>