LOTUS 50000 Outdoor Sports Watch User Guide
- June 6, 2024
- LOTUS
Table of Contents
LOTUS 50000 Outdoor Sports Watch User Guide
Function of watch
Button description:
A: Touch Screen/ Full Touch Screen
B: Back. Long Press for Power on and off
Charging instructions:
Magnetic charging is as shown below.
Only charge the watch in the way shown. Incorrect charging may damage the watch. Be aware that the two contacts of the USB cable are not allowed to contact the conductor at the same time, or it will cause the circuit to burn.
In case of direct connection to a mains power supply, do not use a charger or adapter with an intensity bigger than 2A and 3.7V.
Watch Face in standby mode:
- Swipe right to open Notifications.
- Slide down to open the menu that allows you to adjust the brightness, to check Bluetooth connection status and “Do not disturb” mode status.
- Swipe up to open the main menu.
- Press and hold the screen while in standby mode to change the watch face design. Select by tapping the screen.
- Tap once to display data on heart beats per minute, steps and calories.
Messages
Swipe right on the main screen to open Notifications. To enable notifications, connect the watch with the Lotus SmarTime app and enable the relevant permissions. In the app, you can enable App notifications, Call notifications and SMS notifications. When notifications are received on your phone, they will show up on the watch, which can display up to 8 notifications.
Quick settings
Swipe down screen interface to open the quick settings menu.
- The left icon shows Bluetooth connection status
- The middle icon displays the status of “Do not disturb”. The device only vibrates for the Find device and Alarms functions.
- The right icon can be used to adjust the screen brightness.
- Battery level is shown in the upper part of the screen.
Step counter
The step counter is on by default. This interface displays the current number of steps on the watch. Steps are counted starting from midnight. Swiping left you can find the data regarding distance covered and calories burned.
Sleep monitor
The sleep monitoring time period is from 21:00 to 9:00 the next day. After the sleep pattern has been recorded on the device, sleep data is sent to the Lotus SmarTime app. Swiping left you can find data on the hours of light and deep sleep.
Bluetooth music
Android: after connecting the watch via the phone settings, open the music player, play/ pause and switch songs; (no need to bind in the app, if it is already bound, please unbind it and connect in the phone settings).
Apple: When connected to your phone you can play, pause and switch songs directly via the watch.
Exercise tracking walking, running, cycling, hiking, swimming, football, basketball, table tennis, badminton)
- Select the exercise and tap the screen to start. After a brief countdown, activity tracking will start. You can pause the exercise when needed. When you press the “ ” icon, the exercise will be stopped and the activity data is saved.
- Activity data is saved for any exercise over 200 meters or lasting longer than 5 minutes. For smaller sessions the device will prompt “Too little data to be saved”
- To view your activity data, open the Lotus SmarTime app and tap the synchronization icon in the top left corner.
Heart rate
Wear the watch on your preferred wrist and enter the heart rate menu for the continuous heart rate measurement. When the watch is connected to your phone, the heart rate data can be synchronized to the app in real time.
Blood pressure
Wear the watch on your preferred wrist and enter the blood pressure menu for a single measurement of blood pressure. When the watch is connected to your phone, the blood pressure data can be synchronized to the app in real time.
Alarm Clock
This function shows your alarms. You can manage alarms in the Lotus SmarTime App
Sedentary reminder
Turn on/off the Sedentary reminder. This function lets you know when you’ve been inactive for long spells. This can be configured in the Lotus SmarTime app
Stopwatch
Tap the start button to start, tap again to pause. Swipe right to clear time and exit.
Find phone
Lost your phone? Tap Find phone to make your phone vibrate. Tap again when you’ve found your phone. The watch has to be connected for this function to work.
Remote camera
Open the camera on your phone via the Lotus SmarTime app. Then tap the camera icon to take photos. All photos taken are stored on your phone.
Raise to wake (flip over)
Set to off by default to save battery. This can also be controlled from the Lotus SmarTime app. With this mode activated, the watch screen will turn on with the movement of the wrist.
Timing
Open the countdown function and tap play to start. Once the countdown time is over, the watch will vibrate.
Settings
About
View the Bluetooth name and Bluetooth address and version number.
Restore factory settings
Click Restore factory settings to restore the watch to the initial factory
state.
Shutdown
After clicking Shutdown, the watch is turned off.
Lotus SmarTime App
Installation instructions
Scan the QR code to download:
Download the APP from the online application store:
- Android (version 4.4 onwards): Search for ‘Lotus SmarTime’ in the Google Play Store.
- iOS (version 9 onwards): Search for ‘Lotus SmarTime’ in the APP Store to download.
Android:
The application icon will be visible on your phone:
iOS:
The application icon will be visible on your phone:
Binding via Bluetooth
Unconnected:
When the watch is turned on for the first time, it will start looking for a phone to connect to over Bluetooth. To connect the watch to you phone, open the SmarTime app and open the “More” tab in the bottom right corner. Tap +Add device. Find your watch in the list and select it, your phone will now connect to the watch. Should the watch not be found by the mobile phone, please revise your phone’s location settings.
Binding to the APP:
After the watch is successfully connected to the app, tap to start the synchronization of the time and the time format to the watch.
Finding a device
To locate the watch, select Find Device in the app. The watch will then vibrate providing it is connected to your phone.
Data synchronization
Health and activity data from the watch can be synchronized to the app. Open the heart rate, sleep, and sports interfaces and tap the icon in the top left corner. This will synchronize data between the watch and phone.
Notifications
After the watch is successfully connected to you phone, you can receive your
phone notifications on your watch.
Manage Notifications settings in the More tab in the bottom right corner of
the app.
Call notification
Enable Call notification to be notified of phone calls on your watch.
SMS notification
Enable this to receive SMS messages on your watch.
App notification settings
This feature requires permission for Lotus SmarTime to access your phones’ notifications. When enabled, this feature allows you to monitor notifications for your favorite apps on the watch.
Do Not Disturb mode
When Do Not Disturb is on, your watch will only vibrate for Find watch and Alarms
Drinking reminder
Set start and end times and reminder frequency. Tap Repeat settings to control which days you get Drinking reminders. Enable with the “Drinking water remind” switch.
Sedentary reminder
Start and End control when this reminder is on. Sedentary time and Sedentary Threshold control the time periods and the minimum activity amount. When this reminder is enabled, you’ll be reminded to move if your activity is under the Threshold. Enable with the Sedentary reminder switch.
Set an alarm
Tap “+” to add an alarm. Set the alarm time and Repeat settings if the alarm
should occur on a regular basis.
When enabled, alarms will make the watch vibrate up to 20 times.
Heart rate test
This test allows automatic heart rate measurement. Set the period from start to end and sedentary time interval (minutes), Enable with the Heart rate test switch.
Firmware upgrade
This function checks if new firmware version is available for the watch. Prompt to update and upgrade to the latest version when there is a new one.
Disconnect
Your watch will be listed under My Device. Tap the connected device name or swipe left to disconnect.
Frequent Questions
Do not expose this device to very hot or cold conditions for a long time. Exposure can cause permanent damage.
Why can’t I wear the watch when taking a hot bath?
As bath water temperature can be is high, steam will be generated which can penetrate through the watch’s water proofing.
The watch can’t start up or charge
If your newly received watch doesn’t start up, plug in the charging cable to activate the watch. If your watch can’t start up due to too little battery charge or the watch has not been used for a long time, please plug in the USB cable and charge for at least half an hour for activation.
Disclaimer
The method of capturing the heart rate through an optical sensor used by this
LOTUS watch does not reach the level of precision and accuracy of a
professional medical device, nor can it guarantee the equivalent stable
readings. The watch cannot replace a medical device in its function of
detecting or diagnosing pathologies, heart or other diseases.
Consequently, with respect to this function, the device is for recreational
use only. Multiple factors (including level of skin contact, pigmentation,
tattoos, sudden arm movements etc) can alter the accuracy of the data provided
by the sensor. Therefore, keep in mind that the actual heart rate may be
higher or lower than the reading indicated by the optical sensor at a given
time.
If you suspect any anomaly, always consult your doctor and in case of
emergency, immediately contact the emergency services in your area.
Festina Lotus SA assumes no responsibility for any claim that may arise from the use and / or interpretation that the user of the device and / or third parties may make of the heart rate information provided by their devices.
By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and protecting our health.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>