LOTUS ILM6P89 Multi Dial Quartz Watch Instruction Manual

LOTUS ILM6P89 Multi Dial Quartz Watch

Instructions

**DISPLAY AND BUTTON

**

NORMAL CROWN POSITION
1ST POSITION – QUICK OPERATION – DATE (COUNTERCLOCKWISE)
2ND POSITION – TIME/DAY SETTING (CLOCKWISE)

OPERATION PROCEDURE

1.  1 SETTING THE DAY SETTING THE TIME (HOUR, 24HOUR, MINUTE, and SECOND)
2. SETTING THE MONTH
3. SETTING THE DATE

SETTING THE DAY AND TIME

(HOUR, 24 HOUR, MINUTE, AND SECOND)
The hour, 24 hours, minute, second, and day are set by the same operation.
SETTING PROCEDURE

SETTING THE DAY

• Pull the crown out to the 2nd position to stop the second hand at 0 (12 o’clock).

• Turn the hour/minute hands in a clockwise direction to set a day.

• In order to set the day, you must advance the hour hand by 24 hours per day.

  •  If the day is set by turning the crown counterclockwise, there is the possibility the date will not change over.
    Do not set the day by turning the crown in a counterclockwise direction.

  • The day changes somewhere between 0:00 a.m. and 5:30 a.m. or a little later.

SETTING THE TIME

After setting the day, set the hour (and 24hour) and minute hands.

• Turn the hour/minute hands in a clockwise direction to set the time.
• To ensure time is set accurately, first turn the minute hand 5 minutes ahead of desired time and then turn back (counterclockwise) to the desired time.
• After setting the time, use a time signal to synchronize the watch by pushing the crown to the normal position to start the second hand going.
  • Make sure you have correctly set AM/PM before setting the time.
  • When the day changes over, it is a.m.. (Day changes over between 0:00 a.m. and 5:30 a.m. or a little later). Check am./p.m. by the 24hour hand.

SETTING THE MONTH

(BY QUICK OPERATION)
Each time the month-adjustment button is pushed, the month advances one month at a time. Be sure to press firmly on the button when making monthly changes.

• Do not set the month when the date hand is between the 26th and 31st. Move the date hand out of this period. After this operation, return the date hand to the proper setting. (When the date hand is between the 26th and 31st, month quick setting can not be made or if a quick setting is attempted, the month may not advance to the next month as normal.)
• The month and date are synchronized such that when adjusting the date at the end of short months (less than 31days), the month automatically adjusts to the correct month. The month disc changes around midnight of the 31st.

SETTING THE DATE

(BY QUICK OPERATION)
Pull the crown out to the 1st position. Turn the crown counterclockwise to set the date quickly. Do not set the date between the hours 9:00 p.m. and 0:30 a.m. The date may not change correctly the next day.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>