LC-POWER LC-M16-FHD-60-P 15.8-inch Portable Monitor Instruction Manual
- June 6, 2024
- LC-POWER
Table of Contents
Operating Instructions of
15.8-inch Portable Monitor
LC-M16-FHD-60-P
Product introduction
Product appearanc
Packaging list
Use
Connect to desktop PC
- Connect the HDMI cable with the Mini-HDMI port of the product and the HDMI port of the PC.
- Connect one end of the Type-C power line to one of the Type-C ports of the product and the other end to the adapter and then plug the adapter into the power socket to power the machine.
Connect to laptop
- Connect one end of the Type-C data cable to one of the two Type-C ports of the machine and the other end to the Type-C signal port of the laptop.
- Connect the Type-C power line to the remaining Type-C port and the corresponding power adapter.
Connect to mobile phone
- Connect the Type-C data cable to one of the Type-C ports of the machine and connect the other end to the mobile phone.
- Connect the Type-C power line to the other Type-C port of the machine and the corresponding power adapter.
Introduction of function keys
Introduction of function keys
1| Up key: when the main menu is closed, the shortcut volume icon appears.
Press it again for Volume +;
When the main menu is opened, this key is the Turn-up progress bar and
Previous cycle.
2| Down key: when the main menu is closed, the shortcut volume icon appears.
Press it again for Volume -;
When the main menu is opened, this key is Turn-down progress bar and Next
cycle.
3| Power key/shortcut menu key: when the main menu is closed, the menu
appears. Hold this key for 6
seconds to turn the machine on/off;
When the main menu is opened, this key is the confirmation key for entering
the next level. Hold this key for 1s for the return key.
4| Power/signal indicator: Ice blue indicator – normal operation; orange
indicator – standby; off – turned off.
5| Shortcut menu: Press the power key, then the shortcut OSD disappears. The
window disappears after 5s later when there is no operation.
Note: The keys of the actual model used shall prevail.
Menu description
- When the machine is on, press the menu key to call up the main menu (OSD).
Home page | When selected, the background color of the home page icon turns
blue and the luminance, contrast ratio, and sound options are shown in the
rectangular box.
---|---
Ringer mode| When selected, the background color of the ringer mode icon turns
blue and the ringer mode sub-options are shown in the rectangular box. Click
on the corresponding icon to select the desired ringer mode
Color temperature| When selected, the background color of the color
temperature icon turns blue, and the color temperature sub-options are shown
in the rectangular box. Click on the corresponding icon to select the desired
color temperature.
When the color temperature is User, the R, G, B options are activated. Slide
the icon to adjust the RGB size.
Color | When selected, the background color of the color icon turns blue and
the chromaticity, saturation, and sharpness options are shown in the
rectangular box.
Eyecare | When selected, the background color of the eye care icon turns blue
and the function of the eye care mode is enabled.
Mute | When selected, the background color of the mute icon turns blue, and
mute is enabled.
TYPE-C | When TYPE-C is selected, the background color of the TYPE-C icon
turns blue, and the signal is switched to the TYPE-C port.
HDMI | When HDMI is selected, the background color of the HDMI icon turns blue
and the signal is switched to the HDMI port.
OD| When OD is selected, the background color of the OD icon turns blue and
the OD function is enabled.
DCR| When DCR is selected, the background color of the DCR icon turns blue and
the DCR function is enabled.
Reset| When Reset is selected, the background color of the Re-set icon will
turn blue. After a while, the background color of the Reset icon will turn
blue.
EXIT| When EXIT is selected, the background color of the EXIT icon turns blue
and the home page disappears.
2. Key control method
After the main menu appears, adjust the Up and Down keys to select the desired
function
- Switch between the Up and Down keys to switch among options.
- Press the power key to enter the next menu, and long-press for 1s to return to the previous menu.
- The window disappears 3s later when there is no operation.
Home page
- Switch the Down key to switch among options.
- Press the power key to enter the next menu, and long-press for 1s to return to the previous menu. After selecting a function (as shown below), press the Up and Down keys to adjust the function.
- The window disappears 3s later when there is no operation.
Luminance: Press the Up and Down keys to adjust the luminance.
Contrast ratio: Press the Up and Down keys to adjust the contrast ratio.
Sound: Press the Up and Down keys to adjust the sound
Ringer mode
- Switch between the Up and Down keys to switch among options.
- Press the power key to enter the next menu, and long-press for 1s to return to the previous menu.
- The window disappears 3s later when there is no operation.
Color temperature
- Switch the Down key to switch among options.
- Press the power key to enter the next menu and long-press for 1s to return to the previous menu. After selecting a function (as shown below), press the Up and Down keys to adjust the function.
- The window disappears 3s later when there is no operation.
Color
- Press the Down key to switch among options.
- Press the power key to enter the next menu, and long-press for 1s to return to the previous menu. After selecting a function (as shown below), press the Up and Down keys to adjust the function.
- The window disappears 3s later when there is no operation.
Chroma: Press the Up and Down keys to adjust the chromaticity.
Saturation: Press the Up and Down keys to adjust the saturation.
Sharpness: Press the Up and Down keys to adjust the sharpness.
Other icons
- Switch between the Up and Down keys to switch among options.
- Use the power key to select the corresponding function.
- The window disappears 3s later when there is no operation.
Notes
- Keep away from water sources or damp places, such as bathrooms, kitchens, basements, and swimming pools.
- Ensure that the device is installed and placed in a stable place. Falling may cause personal injury or equipment damage.
- Store and use the product in a cool, dry, and well-ventilated place and keep away from radiation and heat sources.
- Do not cover or block the vent holes on the back cover and do not use it on the surface of a bed, sofa, blanket, or similar objects.
- The power supply voltage range for the operation of the device is indicated on the label of the back cover. If not sure about the supplied voltage, you can consult the dealer or local electric utility.
- When the device remains idle for a long time, disconnect the power to prevent electric shock and abnormal power voltage damage during thunderstorms.
- Do not overload the socket, otherwise, it may cause fire or electric shock.
- Do not put foreign objects into the machine, otherwise, it may cause a short circuit which causes a fire or electric shock.
- Do not disassemble or repair this product without authorization. If any malfunction, please contact the after-sales service personnel directly.
- Do not pull or twist the signal and data cables excessively.
Troubleshooting
Faults | Causes of faults | Solutions |
---|---|---|
Unable to startup | The power supply port is not properly connected | •Correctly |
connect the power supply line
•Long-press the power key to start up the machine
Dim images| The luminance/contrast ratio is not adjusted| •Adjust the
luminance and the contrast ratio
Jumping image or ripple screen| Interfered| •Keep away from electrical
equipment that may cause electronic interference
The indicator is not lit up and no picture is shown| The power line is
not properly connected| •Connect the power supply of the computer and the
portable monitor
•Correctly insert into the ports of the computer and the portable monitor
•Connect the Type-C power line correctly
The screen
displays “Out of range”| Incorrect resolution| •Please set the resolution as
the recommended value in the basic parameters
Health Recommendation
In order to avoid eye fatigue and neck, arms, elbows, and shoulder pain caused by prolonged use of the monitor, pay attention to the following points in use:
- Keep your eyes 20 to 28 inches (about 50-70 cm) from the monitor screen.
- In using the monitor, you are recommended to increase blinking frequency to relieve eye fatigue.
- Please take a rest for 20 minutes every two hours.
- While you are at rest, take your eyes away from the monitor and look at a distant target for at least 20s.
- While you are at rest, you can stretch to soothe the neck, arms, back, and shoulders.
Low blue-ray description
In recent years, the damage caused by blue rays to the eyes has attracted more and more attention. Generally, the wavelength of blue rays is 400-480nm and the wavelength of harmful blue rays is 415-455nm. This monitor has the function of reducing blue-ray emission and the user can enable the low blue- ray mode of this monitor through menu settings.
Basic parameters
Product name | 15.8-in portable monitor |
---|---|
Product code | 15K3F-C |
Screen size | 15.8 inch |
Screen type | IPS |
Resolution | 1920*1080P |
Luminance | 220cd/m2 |
Touch control or not | Not supported |
Speaker | 2*1W |
Refresh rate | 60Hz |
FreeSync | None |
Color gamut | 45%NTSC |
Display color | 16.7M (6BIT+FRC) |
Static contrast ratio | 800:1 |
Interface | Type-C’2 and Mini HDMr1 |
Overall dimensions | 373.2*236.8mm |
Product thickness | 9.4mm |
Net weight | 990g |
Input voltage | DC 20V =1.5A/ |
15V= 2.0A/
12V= 2.5A/
9V= 3.0A
Ambient temperature| 0°C-45°C
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in
the United States
and other countries.
Silent Power Electronics GmbH
Formerweg 8
47877 Willich
Germany
www.lc-power.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>