LC-POWER Gaming 804B Obsession X ATX Gaming Case User Manual
- June 9, 2024
- LC-POWER
Table of Contents
LC-POWER Gaming 804B Obsession X ATX Gaming Case
SPECIFICATION
| Model | Gaming 804B Obsession_X |
|---|---|
| Dimensions | Structure dimensions: 430 x 205 x 470 mm |
Case dimensions: 470 x 205 x 485 mm
Motherboard| E-ATX / ATX / Micro-ATX / ITX
PCleSlots| 7x horizontal+ 2x vertical
Drive Space| 2x 3,5″+ 2x 2,5″ or
3x 3,5″+ lx 2,5″
I/Oports| 2x USB-A, lx USB-C (USB 3.2 Gen lxl), HD Audio
Fan mounting
options
| Front : 3x 120/140 mm Next to mainboard: 2x 120 mm
Top: 3x 120/140 mm Back: 1x 120 mm
PSU shroud: 3x 120 mm
mounting options| Front: 120/140/240/280/360 mm
Top: 120/140/240/280/360 mm
Next to mainboard: 1201240mm
Max. GPU length| 420mm
Max. CPU height| 160mm
Max. PSU length| 200mm
Fans included
in delivery
| 3x 140 mm+ 1 x 120 mm ARGB case fans
(mamboard- or remote controlled)
SCREWS
| For mainboard installation| 6 pcs
---|---|---
| For power supply/ graphic card installation| 10pes
| For main board and 2,5″ SSD installation| 30pcs
| For 3,5″ HDD installation| 12pcs
1/0 PORTS
OVERVIEW
- USS 3.2 Gen 1×1
- USB-C
- HDAUDIO
- POWER SWITCH
- RESET SWITCH
- HDD LED
- POWER LED+
- POWER LED-
- LED/RGB SWITCH
Please refer to the motherboard installation manual to connect these cables.
DRIVE FRAME
- Take out the drive frame from below the PSU shroud.
- Please use the correct screws to mount an HDD or an SSD.
- If you need to mount both an HDD and an SSD as shown in the right example, the installation sequence is@ SSD,@HDD and® HDD.
SSD FRAME
- Take out the SSD frame behind the motherboard.
- Use the correct screws to mount the SSD onto the frame.
- Mount the SSD frame to its original position.
GPU HOLDER
-
Use four screws to mount the graphic card holder onto the PSU shroud.
-
Adjust the GPU holder to a matching distance according to the thickness of the graphic card, then tighten the screws to make sure the graphic card is fixed and can’t move.
