LC-POWER LC-M30UWFC Curved Gaming Monitor User Manual
- June 1, 2024
- LC-POWER
Table of Contents
LC-POWER LC-M30UWFC Curved Gaming Monitor
Product introduction
Packing list: Display/ base parts and screws/ DP cable/ power adapter/ user manual
- Please check that the package of the monitor contains all the parts. If any part is missing, please contact your retailer.
- Note: Additional screws may be used as spare parts.
Installation
Installation of the base
- Open the package to take out the protective styrofoam parts and put them on a flat tabletop.
- Remove the stand and the base. Lock them with the thumb screw attached to the base, as shown in the figure below.
- Put the assembled base into the corresponding slot on the backside part of the housing, gently press the bracket down to lock it.
- Place the monitor upright on the assembled base.
Note: Do not squeeze the screen directly with your hands during the process of installation or placing the monitor upright to prevent the panel from breaking.
Wall mounting assembly
- Open the package to take out the styrofoam parts and put them on a flat tabletop.
- Take out the mounting studs and screw them into the threaded holes.
- Mount the wall mount assembly (75 x 75 mm; optionally available) to the back side of the monitor.
- Note: Hang the assembled product on a stable wall. Do not pinch the screen with your hands
Note: In order to prevent the monitor from falling when it is used on the wall, please install it properly and securely. Do not hang any additional objects on the wall bracket.
Adjustment
Rocker switch and indicator light
Description of the rocker switch
Button | Function |
---|---|
1 | Power: Press to turn on/off the monitor. |
2 | Menu: Press to enter sub-menus/quickly enter the main menu. |
3 | Down: Press to move down in the menu/quickly enter the Gameplus mode. |
4 | Exit/hot key: Press to return to the previous menu/quickly adjust the input |
signal.
5| Up: Press to move up in the menu/quickly enter the contextual modes.
Explanation of indicator light
Indicator light: A steady blue light indicates that the power is on and that the monitor is operating normally. A steady red light indicates that no horizontal or vertical sync signal or no video input signal is detected, and that the monitor is in standby. Make sure your computer is turned on and functioning properly and check that all video cables are fully plugged in and connected to the monitor.
Cable connection
- The interface configuration at the back of the monitor may vary by model.
- Note: If the power cable or signal cable are damaged, they must be replaced immediately.
OSD Menu
- The color and shape of the OSD menu may be slightly different according to your model.
- The OSD menu may change by updated functions.
The On-Screen Display (OSD) menu allows you to adjust the settings of your display. Turn the monitor on and move the rocker switch to the right to display the navigation interface.
- Push the rocker switch to the right to enter the OSD main menu or to enter the sub-menus.
- Push the rocker switch or to scroll through the functions.
- Select the desired function, then push the rocker switch ► to enter the submenu.
- Push the rocker switch or to scroll through the sub-menus, and push the rocker switch ► to select and confirm the desired function.
- Push the rocker switch ◄ to exit from the menu screen.
Basic parameters
The function list in this manual is for reference only and may vary by model.
Main Menu | Sub Menu | Option |
---|
Game Settings
| Standard Mode| Off/On
RTS/RPG Mode| Off/On
FPS Arena Mode| Off/On
MOBA Arena Mode| Off/On
Adaptive-Sync| Off/On
Shadow Balance| 0-100
Response Time| Off/Normal/Fast/Ultrafast
Refresh Rate| Off/On/Position
Game Crosshair|
Off/Crosshairl/Crosshair2/Crosshair3/Crosshair4/Crosshair5/Crosshair6
Game Time| Off/On: 15:00/30:00/45:00/60:00/Position
Dynamic Brightness| Off/Normal/Expert/Elaboration
MPRT| Off/On
Ambient Lighting| Off/On
Picture Settings
| Brightness| 0-100
Contrast| 0-100
DCR| Off/On
Contextual Mode| Off/Movie Mode/Reading Mode/Night Mode/Eye Care Mode
Low Blue Light| 0-100
Sharpness| 0-5
Gamma| 1,8/2,0/2,2/2,4/2,6/5. curve
Aspect Ratio| Wide Screen/4:3/1:1/Auto
Color Settings
| Warm| Off/On
Natural| Off/On
Cool| Off/On
Userl| Off/On: 0-100 (R/G/B)
User2| Off/On: 0-100 (R/G/B)
User3| Off/On: 0-100 (R/G/B)
Hue| 0-100 (R/G/B/C/M/Y)
Saturation| 0-100 (R/G/B/C/M/Y)
Main Menu| Sub Menu| Option
---|---|---
PIP/PBP
| PIP/PBPMode| Off/PIP Mode/PBP 2Win 1:1/PBP 2Win 2:1/PBP 2Win 1:2
Sub-signal Source| DPl /DP2/HDMI1/HDMl2
Audio Source| Auto/DPl /DP2/HDMl1/HDMl2
PIP Position| Top right/ Top left/ Bottom right/ Bottom left
PIP Size| Small/Medium/Large
Window Swap| Off/On
OSD Settings
|
Language
| fejj;j<,pJt/English/ Oj,/s-U”IPortugues do Brasilazil/Deutsch/Nederlands/
Suomi/Fran,;ais/EXX v1K6/lndonesia/ltaliano/ El:,js:MJ/Malaysia/Polski/
Portugues/Pycc•••VEspaiiol/YKpa.,.HCbKa// {;j(‘PJt/Tiirk,;e and more
OSDTimeOut| 5-60
OSD H-Position| 0-100
OSD V-Position| 0-100
OSD Transparency| 0-5
Hotkeyl Setting|
Brightness/ContrastNolume/Mute/Shadow Balance/Game Crosshair/ Refresh Rate/Game Time/Adaptive-Sync/Contextual Mode/Input Signal/ Dynamic Brightness
Hotkey2 Setting
Hotkey3 Setting
OSD Lock| Off/On
Other Settings
|
Input Signal
|
Auto/DP1/DP2/HDMl1/HDMl2
Volume| 0-100
Mute| Off/On
Auto Power| Off/On
Eyeshield reminder| Off/On
Reset| No/Yes
Inform at i o n| Input Source/ Resolution/ Mode
Product model| LC-M30UWFC
---|---
Product name| Liq| uid Crystal| Display
Screen size| 29,5″ I 74,93 cm
Aspect ratio| 21:9
Viewing angle| 178° (H) / 178° (V)
Contrast ratio| 3000:1(typ.)
Color| 16,7M
Resolution| 2560 x 1080 pixels
Refresh rate| 200 Hz
Power input
| 12,0V=4,0A
The standard voltage and power supply may vary with countries, please r e fer to
the labelat the back of the product.
Product dimensions| Without stand| 701,1 x 121,7×317,6mm
With stand| 701,1 x 269,3 x 536,3 mm
Tilting angle| Forward tilting -5° ± 2,0°; Backward tilting 20° ± 2.0°
Height range| 115 ± 5mm
Rotation angle| ±| 25° (± 2,5°)
Environmental conditions
| Usage| Temperature: 0°C – 40°C(32°F – 104°F) Humidity: 10 % – 90 % RH (non-
condensing)
Storage| Temperature:-20° ~ 60° (-4°F ~ 140°F) Humidity: 5 % ~ 95 % RH (non-
condensing)
Safety precautions
- Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools.
- Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause injury or a damage to the device.
- Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.
- Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
- If the monitor will not be used for a long period, please unplug it from the electrical outlet.
- Please use a reliable, properly earthed socket, do not overload the socket, or it may cause fire or electric shock.
- Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.
- Do not disassemble or repair this product by yourself to avoid electric shock.
- If faults occur, please contact the after-sales service directly.
- Do not pull or twist the power cable forcedly.
Maintenance
CAUTION : Unplug the power cable from the outlet before cleaning the monitor.
- To clean your screen, slightly moisten a soft, clean cloth with water.
- Please use a special screen-cleaning tissue if possible.
- Do not use benzene, thinner, ammonia, abrasive cleaners or compressed air.
- Inappropriate cleaning solutions may damage the monitor or leave a milky film on the screen or the housing.
- Unplug the monitor if you are not going to use it for a longer time period.
- Do not expose the monitor to dust, liquids or a humid environment.
- In case the monitor gets in touch with any liquid, wipe it down immediately using a dry cloth. In case any liquid gets spilled into the ventilation holes, do not use the monitor anymore. Please contact a professional service technician.
Silent Power Electronics GmbH Formerweg 8 47877 Willich Germany www.lc- power.com