LC-POWER LC-M32-QHD-165-C Gaming Monitor User Guide

LC-POWER LC-M32-QHD-165-C Gaming Monitor User Guide

1. SAFETY PRECAUTIONS

Do not expose the monitor to a humid environment, rain or other liquids.
Do not open the monitor housing to avoid any shock due to electrical or mechanical hazards.

Operation:

– Keep the monitor out of direct sunlight or other heat sources like stoves.
– Keep the monitor away from any liquid.
– Remove any object that could fall into the ventilation holes.
– Do not block the ventilation holes to avoid overheating.
– Do not knock or drop the monitor.

2.MAINTENANCE

CAUTION: Unplug the power cable from the outlet before cleaning the monitor.
Eng-1
– To clean your screen, slightly moisten a sotf, clean cloth with water.
– Please use a special screen-cleaning tissue if possible.
– Do not use benzene, thinner, ammonia, abrasive cleaners or compressed air.
– Inappropriate cleaning solutions may damage the monitor or leave a milkyfilm on screen or housing.
– Unplug the monitor if you are not going to use it for a longer time period.
– Do not expose the monitor to dust, liquids or a humid environment.
– ln case the monitor gets in touch with any liquid, wipe it down immediately using a dry cloth.
– ln case any liquid gets spilled into the ventilation holes, do not use the monitor anymore.Please contact a professional service technician.

The terms HDMl and HDMI High Definition Multimedia lnterface, and the
HDMl logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the USA and other countries.

3.Box Contents

4. Product Overview

4.1 —Monitor Butions

1. M Menu Button: Press to display the OSD menu or enter sub-menus.
2. Down Button: Press to move down in the menus.
3. Up Button: Press to move up in the menus.
4. E Exit Button: Press to exit.
5. Power Button: Press to turn the monitor on/off.
6. LED indicator: Changes colour to indicate the monitor status.

4.2—Monitor Ports

7. HDMI Input: Insert one end of the HDMl cable into the computer’s
   HDMl output and connect the other end to the monitor’s HDMI port.

8. DP Connectors: lnsert one end of the DP cable into the computer’s DP output and connect the other end to the monitor’s DP port.

9. Audio Output: lnsert the audio cable for output of audio signals.

10. Power Connector: Insert the power cable to supply power to the monitor.

5. Stand lnstallation

1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table.

2. Take out the base and bracket and lock them with three screws.

3. Remove the upper styrofoam (Note: the machine cannot leave the lower styrofoam) and press the button to take out the rotating shaft assembly.

4. Take out the rotating shaft assembly from the whole machine and lock it with the support base with two countersunk screws.

5. Before removing the base, remove the cover from the port of the back of the monitor. Press the button to remove the stand.
   Make sure the monitor is laid on a flat surface before removing the stand.

6. Hold the support by hand and stand the machine up (Note: during the process of seting up the machine, the machine is still in the lower poly dragon and does not need to be taken out. Do not hold the screen directly by hand to prevent the screen from being broken)

6. Wall Mounting

1. Take out the rotating shaft assembly and press the button to remove it.

2. lock the rear shell four screws out (the screen can not leave the Pauli dragon foam to prevent broken screen).

3. Take out the wall mount transfer parts from the bubble bag and hang up with the wall fittngs. Take out four M4*16mm screws from the annex bag and lock the wall attachment to the back shell with screws.

4. Do not directly pinch the screen with your hands during hanging the product to prevent the screen from breaking.

7. Connectivity Options

1.  Insert one end of the DP cable into your PC’s graphics card. An HDMl cable may also be used. HDMI cable is included.

2. Connect the other end of the cable to the corresponding connector onyour monitor.

3. Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached directly.

4.  Locate the power button on the monitor and press it to turn the monitor on.

8. Light lndicator

lndicator Light

Solid blue light indicates power is on and the monitor is operating normally.
Flashing blue light indicates no video source, no horizontal or vertical signal has been detected or power is low.Please ensure your computer is on and all video cables are fully inserted and/or connected.

9. OSD

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on screen after turning on the monitor and pressing the M button.
When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer’s configuration and parts etc.

OSD Menu

1. Press any one of the buttons ( ) to activate the navigation window.

2. Press M( ) to enter the OSD screen.

3. 

9.1- OSD Menu Functions

DP 2

| NONE| Switch to DP signal input
HDMI 1,

HDMI 2

| NONE| Switch to HDMI signal input
Brightness/ Contrast| Brightness| 0~100| Adjust display brightness
Contrast| 0~100| Adjust display contrast
DCR| On| Turn on DCR function
Off| Turn off DCR function
Color Setting| Gamma| 1.8| Set Gamma add-in
2.0
2.2
2.4
2.6
Picture Mode| Standard, Photo, Movie, Game, FPS, RTS,| Set visual mode according to activity
Color Temperature| Warm, Cool, User| Select color temperature
Low Blue Light| 0~100| ****
Hue| 0~100| Adjust hue levels
Saturation| 0~100| Adjust saturation levels
Picture Quality Setting| Sharpness| 0~100| Set display sharpness
Response Time| Off, High, Middle, Low| Adjust response time
Noise Reduction| Off, High, Middle, Low| Reduce the interference of image noise caused by signal source interference
Super Resolution| Off, High, Middle, Low| When the resolution of the display screen is low, this function can be turnedon to enhance the image resolution
Dynamic Luminous Control| On, Off| Compensate for gray scale display screen and strengthen the expression of gray scale
Display| AspectRatio| Wide Screen, 4:3,

1:1, Auto

| Select on-screen aspect ratio
LedMode| Normal, Off, Flicker| Adjust back cover LED lighting
Audio| Mute| On, Off| Turn mute mode on/off
Volume| 0-100| Adjust audio volume
Audio Source| HDMI1, HDM2, DP1,DP2| Select audio signal input via HDMI or DP
Main Menu| Sub-Menu| Options| Description
---|---|---|---
Multi-Window| Multi-Window| Off, PIP Mode, PBP 2Win| Select PIP/PBP modes according to the number of input signals etc.
Sub Win2 Input| DP1,DP2,HDMI1, HDMI2| Select according to input signal for PBP mode
PIP Size| Small,Medium, Large| Adjust the PIP/PBP display window size
PIP Position| TopRight, TopLeft, BottomRight, BottomLeft| Adjust the PIP/PBP window position
Swap| NONE| Swap the two channel signal source of only the PIP/PBP 2 screens function
OSD| Language| English, 简体中文, 한국어, Русский, Español, 日本語, Français, German| Set OSD language
OSD

H-Position

| 0-100| Adjust the OSD’s horizontal position
OSD V-Position| 0-100| Adjust the OSD’s vertical position
OSD

Transparency

| 0-100| Set the OSD’s overall transparency
OSD Time Out| 5-100| Set how long the OSD remains open after non-use

OSD Rotation

| ****

Normal,90,180,270

| When the user flips the display , this function can also flip the OSD to achievethe best display angle
Other| DP Version| DP1.1, DP1.2, DP1.4|
Adaptive-Sync| On, Off| Turn the Adaptive-sync function on/off

HDR

| On,Off, AutoDetect| Turn the HDR mode on/off
Reset| None| ****

10. Eco Mode and GamePlus

1. Press any one of the buttons ( ) to activate the navigation window.

2. Pressv ( ) to switch Gameplus modes. According to the needs of your game, choose the corresponding game icon. These game icons are primarily designed to optimize youraim during shooting games, though they can be used for other scenarios.

3. Press E( )button to switch RGB Ranges included Limited and Full. Full Range is suitable for most activities.

11. Technical Specifications

| No
| Yes

Power Cable| Yes
HDMI Cable| Yes
DP Cable| Yes

| Yes
 |
 | 712.5508.5245.1mm
| 712.5422.8120.6mm
 | 7.07kg
 | 9.09kg

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>