LC-POWER LC-M24-FHD-75 23.8 Inch PC Monitor User Manual

LC-POWER LC-M24-FHD-75 23.8 Inch PC Monitor

Safety precautions

• Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools.
• Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause injury or a damage to the device.
• Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.
• Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
• If the monitor will not be used for a long period, please unplug it from the electrical outlet.
• Please use a reliable earthing socket, do not overload the socket, or it may cause fire or electric shock.
• Do not put foreign matters into the monitor, or it may cause short circuits resulting in fire or electric shock.
• Do not disassemble or repair this product by yourself to avoid electric shock. If faults occur, please contact the after-sales service directly.
• Do not pull or twist the power cable forcedly.
• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, otherwise the monitor may be damaged and the warranty will be invalid.

Maintenance

CAUTION: Unplug the power cable from the outlet before cleaning the monitor.

• To clean your screen, slightly moisten a soft, clean cloth with water.
•  Please use a special screen-cleaning tissue if possible.
• Do not use benzene, thinner, ammonia, abrasive cleaners or compressed air.
• Inappropriate cleaning solutions may damage the monitor or leave a milky film on the screen or the housing.
• Unplug the monitor if you are not going to use it for a longer time period.
• Do not expose the monitor to dust, liquids or a humid environment.
• In case the monitor gets in touch with any liquid, wipe it down immediately using a dry cloth.
  In case any liquid gets spilled into the ventilation holes, do not use the monitor anymore.
  Please contact a professional service technician.

Legal note:
HDMI
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Product introduction

Packing list

• Please check that the package of the monitor contains all parts. If any part is missing, please contact the retailer.
• Note: Additional screws may be used as spare parts.

Instructions for usage

Description of buttons

1. Power button: Turn on/off the monitor.
2. Exit/Left button: Exit or return to the previous menu/quickly switch the input signal.
3. Down button: Move down in the menu/quickly enter the GamePlus mode.
4. Menu button: Enter sub-menus/quickly enter the main menu.
5. Up button: Move up in the menu/quickly change the refresh rate.

Explanation of indicators

Indicator light:
Steady blue light indicates that the power is on and the monitor works normally. Red light indicates that no horizontal or vertical synchronous signal is detected or that there is no video input signal, and that the monitor is in standby status. Please make sure your computer is turned on and operates normally and check that all video cables are fully plugged in and/or connected to the monitor.

Adjusting the monitor

Tilting angle
-5,0°(±2,0°)- + 15°(±2,0°)

Installation of base

1. Open the carton package, take out the foam part and put the monitor flat on the table top.
   Keep the foam part underneath the monitor before attaching the stand .

2. Take out the bracket and place it on the machine’s shaft and fix it with two screws. screws

3. Take out the base, align it with the bottom of the stand, and fix it with two screws.

4. After the assembly, take the stand with your hand to put the monitor into an upright position
   Note: Do not press the screen with hand your to avoid damage to the screen panel.

Installation of wall-mounting accessory

1. Open the carton package, take out the foam part and put the monitor flat on the table top.
   Keep the foam part underneath the monitor before attaching the wall-mounting components .

2. Take out the wall-mounting bracket and lock it with two screws.

3. Note: Hang the assembled product on a stable wall. Do not pinch the screen with your hands to avoid damaging the screen.
   Note: In order to prevent the monitor from falling when it is used on the wall, please install it properly and securely. Do not place or hang any objects on the wall bracket.

Cable connection

Note: If the power cable or signal cable is damaged, you must replace it immediately.

• HDMI interface

  • Use the HDMI cable to connect the HDMI IN interface of the product to the HDMIOUT interface of a PC.
  • Use an HDM-DVI cable to connect the HDMI IN interface of the product to the DVI OUT interface of an older PC. HDMI

• VGA intertace
  Use a VGA cable to connect the VGA interface of the product to the VGA interface of an older PC.

• AUDIO OUT
  Connect audio playback devices such as headphones to the AUDIO OUT interface.

• DC IN
  Please connect the power adapter plug to the corresponding power port of the monitor, and connect the other end to a properly grounded power outlet.

0SD menu

Menu description

• The color and shape of the 05D menu of the actual monitor may be slightly different from the one shown in the figure below.

• Detail specifications of the 05D menu may change with improvements of functions.
  The on-screen display(OSD) menu can be used to adjust the settings of the monitor and is displayed on the screen after turning on the monitor and pressing the button.

  1. Press one of the buttons to activate the browser screen.
  2. Press ( )to enter the 05D screen.
  3. Press to browse through the functions.
  • Select the desired function, then press the button to enter the submenu.
  • Press to browse the sub-menus, and then press the key to confirm the selection of the desired function.
  • Press to select an option, then press to confirm the setting and exit the current menu.
  4. Press to exit the menu interfaceo

• Functions of the monitor vary with models, and the functions in this manual are for reference only.

BASIC PARAMETER

Power specifications

| DC 12,0V=2,5 A

The standard voltage and current may vary with countries, please refer to the label at the back of the product.

Product dimensions

| Without base| 542,4 x 323,1 x 38,5 mm
With base| 542,4 x 402,8 x 160,9 mm
Net Weight| approx. 3,2 kg
Gross Weight| approx. 4,5 kg
Tilting angle| Forward titling: -5 °± 2 ° ;backward tilting: 15 °±2°
Rotation angle| NA
Height angle| NA
Pivot angle| NA
Environmental

Conditions

| Usage| Temperature: 0°C~ 40°C (32°F ~ 104°F) humidity: 10%~90%RH (non- condensing)
Storage| Temperature: -20°~ 60° (-4°F – 14 0°F) humidity: 5%~95% RH (non- condensing)

ABOUT COMPANY

• Silent Power Electronics GmbH
• Formerweg 8
• 47877 Willich
• Germany
• www.lc-power.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>