bitel UC200 Universal Remote Control User Manual
- June 1, 2024
- bitel
Table of Contents
- bitel UC200 Universal Remote Control
- Product Information
- Product Usage Instructions
- Frequently Asked Questions
- Getting Started with Multi Remote
- Setting Mode
- Adding Database Devices
- Adding and Using OTT,Bluetooth Devices OTT,Bluetooth
- Troubleshooting Error Screen Display
- Product Warranty After-sales service processing regulations
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
bitel UC200 Universal Remote Control
Product Information
Specifications:
- Product: Universal Remote Control
- Model: UC200
- Components: A, B, C, D, E, F, G, H, I, J, K, L, M, N, O
- Connectivity: IR Transceiver, USB Type-C Connector
Product Usage Instructions
1. Getting Started with Multi Remote
- Power On: Press the power button for a few seconds to turn on the remote control.
- Power Off: Press and hold the ON and home screen buttons simultaneously for 3 seconds to turn off the remote control.
2. Screen Configuration and Device Selection
You can select a device by touching the screen and press to move to the home screen. You can change pages by scrolling left and right or using the previous/next page keys on the UC500 product.
To quickly move registered devices, scroll the screen up and down.
3. Setting Mode
The remote control has Basic Setup and Expert Setup modes. Basic Setup is for easy setup and use, while Expert Setup allows detailed settings like software updates and data backup.
To enter setting mode, press and hold the Home Screen Key for 3 seconds. Navigate through different settings using the keys provided.
4. Adding Database Devices
The remote controller has a built-in database for easily adding various devices. Follow the instructions on the screen to add new devices to the controller.
Frequently Asked Questions
- Q: How do I register devices on the multi-remote controller?
- A: To register devices, go to the Devices section in the settings menu and follow the on-screen instructions to add your devices.
- Q: How do I switch between Basic Setup and Expert Setup modes?
- A: Press and hold the UC500 setting key or the home screen key of UC200 for 3 seconds to switch between Basic Setup and Expert Setup modes.
“`
Universal Remote Control
User Manual
UC200
Contents 1. Product Composition and Name of Each Part for UC200/UC500—–1~2 2. Terminologies—————————————————————3 3. Getting Started with Multi Remote——————————-4~5 4. Setting Mode————————————————————6~7 5. Adding Database Devices———————————————-8~10 6. Adding and Using OTT/Bluetooth Devices————————–11~19 7. Deleting Devices———————————————————–20 8. Deleting Devices(Bluetooth)——————————————21~23 9. Keys Adding—————————————————————24 10. Deleting Keys————————————————————–25 11. IR Learning————————————————————26~28 12. Copying Keys——————————————————– 29~30 13. Devices Moving———————————————————–31 14. Changing Devices Names——————————————–32~33 15. Move Key————————————————————-34~35 16. Renaming Keys————————————————————36 17. Preference————————————————————-37~38 18. Setup Mode—————————————————————38 19. Troubleshooting——————————————————39~41 20. Specifications————————————————————–42 21. Warranty——————————————————————-43 Product Safety Guidelines————————————————–44 Battery Safety Guidelines—————————————————45
Product Composition and Name of Each Part for
M
D
B
A
C
I
J
E
F
K
L
G
H
N
O
A Power ON/OFF B Display home C EXIT D LCD Screen E Volume UP/DOWN F Channel UP/DOWN G Navigator H Selection
H
I Menu
I
J Home/Guide
J
KK Mute
H
L Information
I
M IR Transceiver J
N USB Type-C Connector
J
OK USB C Cable
1
2. Terminologies Devices Marked the products (TV, Audio, AC, etc.) to be
registered on the multi-remote controller (UC200/UC500) as devices.
Devices
Keys/Buttons Keys created in registered home appliances/devices (volume, channel, and other function keys)
INPUT
TV INPU T
TIMER CC
SIMPLINK
SOUND RATIO
Keys or Buttons
3
Getting Started with Multi Remote
UC200 REMOTE POWER ON Press power button for second minutes. (device goes into power saving mode if no action is made)
UC200 REMOTE POWER OFF
If you press and hold ON and the home screen button
<3 seconds > at the same time for 3 seconds, the power of the remote control unit is turned off.UC500 REMOTE POWER ON Press power button for second minutes. (device goes into power saving mode if no action is made)
UC500 REMOTE POWER OFF
If you press and hold ON and the home screen button
<3 seconds > at the same time for 3 seconds, the power of the remote control unit is turned off.Screen Configuration and Device Selection Title
Device & Button List
Page
LCD Screen Touch
- You can select a device by touching the screen, and press to move to the home screen. 4
3. Getting Started with Multi Remote Page Change
Or
You can change the page by scrolling left and right on the screen or by
pressing the previous/next page key on the UC500 product. Moving Device
You can quickly move registered devices by scrolling the screen up and down.
(It will be moved to devices except Bluetooth devices.)
5
4. Setting Mode
BECSY multi remote control consists of two modes, Basic Setup and Expert
Setup, and the basic setting of the remote control is set to Basic Setup mode.
Run setting mode
Or
< UC200 Home Screen Key 3 seconds >< UC500 Home Screen Key 3 seconds >
Press UC200
Home Screen Key or UC500
Key for 3 seconds for setting mode
Setting
Expert Setup
Basic Setting Setup Devices Setup Keys Preference System Update App and etc
6
Setting Mode
1. Basic Setup Mode (Basic Setting) Basic Setup allows users to easily set up
and use the remote control; a setting mode in which the basic menu is composed
of icon buttons.
2. Expert Setup Mode Expert Setup allows detailed settings for the remote
control; S/W update, user data backup and restore functions.
Click the “Setup Mode” icon screen to activate Expert Mode.
on the Basic Setup mode
Setup Mode
Expert Mode
ON
< Expert Setup Mode Basic Setup Mode Setting >Press and hold the UC500
setting key or
the
home screen key of UC200 for 3 seconds, and move to setup
mode by pressing and then change to OFF in Preference Setup
Mode.
Returning from expert mode to basic mode can be set in the Preferences item in Setup.
7
Adding Database Devices
BECSY multi remote controller has a built-in database, so you can easily add various devices.
- Press and hold the UC500
setting key or
the home
screen key of UC200 for 3 seconds, then the screen goes to basic
setup mode.
-
Select Add Device.
-
Select the type of device you want to add. (Swipe the screen left and right or using the previous/next page buttons. More devices can be searched.)
8
5. Adding Database Devices
- Select the manufacturer of your device.
( You can change the page by scrolling left/right or using the previous/next page key to view more search by device and manufacturer.)
Codeset (1/28)
Test any key to control the selected device. If the device is successfully
operated. Press SEL button to finish.
To change the codeset, press Prev/Next button
- Select an IR Codeset suitable for the device. and press ON/OFF, Volume, Channel keys, etc. to check if the device operates normally. Scroll left and right to find the appropriate Codeset and press key to confirm.
9
5. Adding Database Devices 6) Set the device name.
( You can change capital and small letters by scrolling up/down the
screen, and the keyboard layout of letters by scrolling/right.
After setting the name, press the
key to save.)
- When the device addition is complete, the added devices appear in the order they were created on the main screen.
10
Adding and Using OTT,Bluetooth Devices OTT,Bluetooth
After selecting OTT, you can add and use a device. After registering the template class as a basic, go through the pairing process on the home screen to use it.
- Press and hold the UC500
setting key or
the home
screen key of UC200 for 3 seconds, then the screen goes to basic
setup mode.
-
Select Add Device.
-
Select OTT
-
Select device type.
For Roku devices, we do not go through the pairing process.
11
6. Adding and Using OTT/Bluetooth Devices OTT/Bluetooth
-
Enter the device name. After completion, press the
key to confirm. -
Go to the home screen and check the added devices.
How to pair Chromecast class (Other Bluetooth class pairing methods are similar.)
Bluetooth
There is no paired key. Would you like to pair with bluetooth host?
OK
Cancel
-
Select Chromecast class device from home screen.
-
Select OK on the pairing screen
12
6. Adding and Using OTT/Bluetooth Devices OTT/Bluetooth
BT State
Try to pair remote from chromecast_1
[timeout=178]
-
Make sure that the pairing screen appears as shown. The waiting time for pairing is 3 minutes and 30 seconds, and the pairing must be completed within the timeout period
-
When the progress pairing screen appears, proceed with pairing in Chromecast as well.
-
Select “Remote Controls & Accessories” on the Chromecast settings screen.
13
6. Adding and Using OTT/Bluetooth Devices OTT/Bluetooth 12) Select “pair a
remote control or accessory”.
13) When the UC500 device screen is displayed, selecting the device
automatically initiates pairing proceed. (Searching may take more than 30
seconds depending on the situation.) If the device is not searched, proceed
from step 7 again. 14
6. Adding and Using OTT/Bluetooth Devices OTT/Bluetooth
14) When pairing is completed, the “UC500” device is registered to Chromecast.
15) The pairing progress window appears on the LCD screen of UC500 for a
while, and the device selection screen appears. (You can check the operation
by pressing the key on the Chromecast device.) 15
6. Adding and Using OTT/Bluetooth Devices OTT/Bluetooth This is an example of
how to use the Chromecast device. You can use basic mode/mouse mode/keyboard
mode.
Main UI screen / Media UI screen of Chromecast device (Switching the screen
using left/right scroll or previous/next keys)
Mouse movement by dragging the LCD screen. The wheel button in the center is
controlled by the UP/DOWN keys. 16
6. Adding and Using OTT/Bluetooth Devices OTT/Bluetooth
Left/Right Mouse Click: Use the left/right arrow keys. (When tapping the LCD
screen, only the lower right area is the right button.)
To move the keyboard screen, use the left/right scroll or previous /next keys.
(Ctrl and Alt keys are used by pressing the following keys while Ctrl keys are
pressed.)
Ex) In case of using Ctrl + C : While “Ctrl” key is pressed Click “C” 17
6. Adding and Using OTT/Bluetooth Devices OTT/Bluetooth
conversion
< Upper case > < Low case >For uppercase and lowercase letters in English, scroll up/down the LCD screen
If the title is displayed in red, it is not connected to the device. Please
wait until the connection is complete.
18
6. Adding and Using OTT/Bluetooth Devices OTT/Bluetooth Moves to the next/previous screen whenever the channel UP/DOWN button is clicked
< basic UI screen > < mouse screen > < keyboard screen > In the OTT/Bluetooth device menu, you can easily move the screen by using the set’s channel UP/DOWN keys. (Basic UI screen mouse screen keyboard screen) 197. Deleting Devices
- Press and hold the UC500
setup key or the UC200
home screen key for 3 seconds to move to the setup mode.
-
Select Delete Device
Delete device
Are you sure to delete the device TV? -
Select device to delete
( All button information stored in the device will be deleted upon deletion.)
OK
Cancel
- Press OK key
20
8. Deleting Devices (Bluetooth)
Bluetooth
You must also unpair from chromecast_1
OK
Cancel
- In case of deleting Bluetooth devices, a confirmation window is displayed once more.
Ex) Delete Chromecast device
6-1) Chromecast Settings Select “Remote Controls & Accessories”. 21
8. Deleting Devices (Bluetooth) 6-2) After selecting the UC500 device, select “Don’t Save”. 22
8. Deleting Devices (Bluetooth)
6-3) Make sure the “UC500” device is removed from the “Remote Controls &
Accessories” menu.
23
9. Keys Adding
- Press and hold the UC500
setup key or the UC200
home screen key for 3 seconds to move to the setup mode.
-
Select Add Key.
-
Select the device to add the new key.
-
Sets the name of the key to be added.
-
You can check the key created in the selected device (ex> TV).
24
10. Deleting Keys
- Press and hold the UC500
setup key or the UC200
home screen key for 3 seconds to move to the setup mode.
-
Select Delete Key.
-
Select the device that has the key to delete.
Delete device
Are you sure to delete this key? -
Select the key to delete.
OK
Cancel
- Press OK key.
25
11. IR Learning
If the BECSY multi-remote control itself has unregistered functions or if you
want to register a remote control that is not in the database, you can use the
IR learning function to control data can be registered.
- Press and hold the UC500
setup key or the UC200
home screen key for 3 seconds to move to the setup mode.
- Select Learning.
26
11. IR Learning
Learning INPUT
TV INPU T
TIMER
SOUND
- Select Devives.
CC
RATIO
SIMPLINK
Press any key to learn [2/5]
- Select the button to apply IR learning.
In addition to the buttons on the LCD screen, the actual buttons (ON/OFF, Volume Up/Down, etc.) can also be selected. However, the home screen, the previous/next page button, and the setting button cannot be applied to IR learning. You can add a new button by selecting the + button on the screen.
- When the phrase “READY” blinks at the bottom of the screen, you are ready for IR learning.
IR Learning Press any key to learn [2/5]
< existing remote to cop > 27READY
11. IR Learning 7) When you press the key you want to learn from the existing
remote control, it automatically receives and stores the signal at the
specified key on the UC500. When IR learning is completed normally, the phrase
‘SUCCESS’ appears at the bottom of the screen.
IR Learning Press any key to learn [2/5]
< Press the key to copy >SUCCESS
- In the same way, the rest of the keys do IR learning. If it is not completed at once, repeat the learning.
You can refer to the IR learning method video by accessing the QR Code below.
28
12. Coping Keys
You can copy the settings of all buttons (actual buttons, number pad keys, and soft buttons) registered on a device to other devices and other buttons.
- Press and hold the UC500
setup key or the UC200
home screen key for 3 seconds to move to the setup mode.
-
Select Copy Key.
-
Select the device on which the button you want to copy is registered.
-
Select the button to copy.
-
Select the device to copy to. 29
12. Coping Keys
6) Select the button of the position (slot) to be copied. You can select not
only the Soft Button but also the actual button on the remote control.
30
13. Devices Moving
The BECSY multi-remote controller can easily change the device screen
configuration by moving the location of the registered device.
- Press and hold the UC500
setup key or the UC200
home screen key for 3 seconds to move to the setup mode.
-
Select Move Device on the second page of Basic Setup.
-
Select the device to be moved.
-
Select the location you want to move to.
-
It is automatically sorted after being moved.
31
14. Changing Devices Names
- Press and hold the UC500
setup key or the UC200
home screen key for 3 seconds to move to the setup mode.
-
Select Edit Device Name on the second page of Basic Setup.
-
Select the device to be renamed.
-
Change name.
-
Press “OK” when changing device name and icon together. Press “Cancel” in case of changing only the name.
32
14. Changing Devices Names
6) ) If you select “OK” to change the name and icon together, select the
device icon to be changed to switch the name and icon.
33
15. Move Key
- Press and hold the UC500
setup key or the UC200
home screen key for 3 seconds to move to the setup mode.
-
Select Move Key on the second page of Basic Setup.
-
Select the device to move the key to.
-
Select the soft button you want to move.
-
Select the button of the location to be moved.
34
15. Move Key 6) Confirm by pressing OK.
35
16. Renaming Keys The key (button) name change function can only change the name of the screen soft button.
- Press and hold the UC500
setup key or the UC200
home screen key for 3 seconds to move to the setup mode.
-
Select Edit Key Name on the second page of Basic Setup.
-
Select device.
-
Select Soft button to rename. 5) After entering the name, confirm with the SEL button. (UC200 is the center key of the direction keys)
36
17. Preference
The Preference menu in Basic Setup mode consists of 7 menus: Macro key
setting, Sleep timer, Display, Sound, Other, Unpair device, and Setup
Assistance.
- Press and hold the UC500
setup key or the UC200
home screen key for 3 seconds to move to the setup mode.
Preference
^
Sleep Timer Display Sound Other Unpair Device Setup Assistance
-
Select Edit Key Preference on the second page of Basic Setup.
-
Select menu.
MACRO Key Setting Assign macro keys and set macro actions.
Output timer Set the action after a specified time.
Display You can set power settings such as screen off, sleep mode, and air conditioner temperature units (Celsius, Fahrenheit)
37
17. Preference Sound You can turn into key beep ON/OFF. Other Set other
functions. Unpair Device Remove paired Bluetooth device information. Setup
Assistance This is a simple guideline built-in the remote control.
18. Setup Mode
- Enable/disable Expert Setup mode.
A detailed manual of Expert Mode can be found at www.becsy.net
38
Troubleshooting Error Screen Display
Action
BT DEVICE
chromecast_1 is already existed.You try to rename it.
1
OK
The same Bluetooth device name cannot be duplicated.
Bluetooth timeout
Bluetooth Pairing timeout
2
OK
When the pairing standby time (3 minutes and 30 seconds) has passed.
39
19. Troubleshooting
Error Screen Display
Action
Error message when connecting to an existing registered device during pairing attempt
Bluetooth
Turn off
3
android_tv_n10 device. and try again
After turning off the Bluetooth of the Android_tv_n10 device, try pairing.
OK
Message that occurs when a
connection request is received from an unknown Bluetooth host device during pairing attempt
Occurs if you do not delete the previously connected pairing
Bluetooth
information. Find the
4
SECURITY FAILED.
Please try to pair
after solving it.
device you are trying to connect to, delete the pairing information,
and try pairing.
OK
40
19. Troubleshooting Error Screen Display
Action
Add device The max number of BT devices is 8.
OK
5
Add device To add a BT device, you must delete one or more bluetooth devices.
This message is displayed when registering more than 8 Bluetooth devices that
can be registered. Delete one or more Bluetooth devices and try pairing again.
The maximum number of Bluetooth devices registered is 8.
OK
41
20. Product Specifications
IR
Bluetooth USB
H x W x D
UC200
UC500
Infrared Rx/Tx
BLE 5.x
USB Type C
Li-ion 2000 mAh
Li-ion 2600 mAh
115 x 54 x 17(mm) 204 x 54 x 31(mm)
100g
176g
Republic of Korea
42
Product Warranty After-sales service processing regulations
In case of defects in performance and function of the product that occur
during normal use of the product, free after-sales service is available only
for 1 year from the date of purchase. <Repair fee will be charged for
breakdowns caused by customer negligence such as damage due to impact or
submersion, etc.> Customer Center : +82-31-8018-5671 / AS@becsy.net – Contact
4F. S dong, Gangnam Paragon, 338, Hakdong-ro, Gangnam-gu, Seoul, 06099
Republic of Korea T : +82-2-545-2630
www.becsy.net
The contents of the user manual are subject to change without notice to
improve functions and performance. <Ver.1.0>
43
Product Safety Guidelines Read the safety instructions carefully before using this product. – Keep out of reach of children. – Do not disassemble the product or replace parts yourself. – Replacement of components (if not applicable)and parts may be carried out by an authorized dealer or service provider. – Keep your device in a safe place. Don’t place the product exposed to rain, moisture, or liquid. – If the product is overheated, damaged by dropping, or dropped into liquid, stop using it and contact the after-sales service center. – If smoke or strange smells occur, turn off the power and discontinue use. – Lightning may break the charging cable connected to the product. – Be careful when transporting the product. (Falling may cause injury.) – Be careful not to expose it to direct sunlight. – Be sure to use certified charging adapters. – When charging the product with a USB cable, use a USB cable suitable for the product. – Before maintenance and cleaning, unplug the product and wipe it with a dry or slightly wet clothes. – Do not place in high temperature (above 104°F), low temperature (below 0°F) or high humidity. – Store away from volatile liquids such as pesticides. – To maintain a long battery life, charge the battery at least once every 3 months. – Do not insert sharp metal objects such as keys, hairpins, nails, etc. – Do not put in dishwasher, oven or washing machine. 44
Battery Safety Guidelines For products with batteries, observe the following.
“CAUTION ” – Improper handling of the battery installed in the product may
cause a fire or get burned chemically. – Dispose of replaceable batteries
after use according to regulations and, if possible, recycle them. Batteries
may explode if damaged. – Throwing it away as household waste or throwing it
into the fire can explode. Dispose of the product according to the regulations
Refer to additional instructions and more information at www.becsy.net
45
a. Rule Part 15.19(a)(3): This device complies with part 15 of the FCC Rules.
Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. b. Rule Part 15.21:
The users manual or instruction manual for an intentional or unintentional
radiator shall caution the user that changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment. Note: This equipment has been tested and
found to comply with the limits for a Class B digital NOTE: This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: · Reorient or relocate the receiving antenna. · Increase
the separation between the equipment and receiver. · Connect the equipment
into an outlet on a circuit different from that to which the receiver is
connected. · Consult the dealer or an experienced radio/TV technician for help