VSPL-1045-BBZ-R1 Volt Solar Landscape Lighting Instruction Manual
- June 13, 2024
- VOLT
Table of Contents
- **** IMPORTANT: PLEASE READ BEFORE INSTALLATION
- **** IMPORTANT SAFETY INSTRUCTIONS
- PACKAGE CONTENTS
- PARTS REQUIRED (SOLD SEPARATELY)
- PRODUCT DIMENSIONS
- REMOVE BATTERY COMPARTMENT COVER
- INSTALL BATTERY
- REINSTALL BATTERY COMPARTMENT COVER
- TEST SOLAR LIGHT
- INSTALL RISER
- INSTALL STAKE
- INSTALL RISER TO STAKE
- Documents / Resources
Instruction Manual
INSTALLATION INSTRUCTIONS
VOLT® SOLAR LANDSCAPE LIGHTING
V O LT® Solar Path Light
ITEM: VSPL-1045-BBZ-R1 & VSPL-1045-PBK-R1
**** IMPORTANT: PLEASE READ BEFORE INSTALLATION
This luminaire is intended for installation in accordance with local codes and
the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situations.
Please note that these solar fixtures are equipped with built-in photocells,
so they will not turn on until it is dark enough. These fixtures will also
require plenty of sunlight to function properly. It’s best to have the fixture
in an area where the sun will get to it at all times throughout the day and
where no ambient lighting will affect the photocell at night.
**** IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
LIGHTED LAMP IS HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
- Lamp gets HOT quickly!
- Do not touch the hot lens, guard or enclosure.
- Keep lamp away from materials that may burn.
- Do not touch lamp at any time. Use a soft cloth. Oil from skin may damage lamp.
- Do not operate the luminaire fitting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS
PACKAGE CONTENTS
A. (1) Fixture Body
B. (1) Battery
PARTS REQUIRED (SOLD SEPARATELY)
A. (1) Mounting Accessory
B. (1) Riser
PRODUCT DIMENSIONS
REMOVE BATTERY COMPARTMENT COVER
Using a screwdriver, remove the
battery compartment cover from the fixture body.
INSTALL BATTERY
Insert the battery into the battery Compartment.
REINSTALL BATTERY COMPARTMENT COVER
Place the battery
compartment cover back onto the fixture body and secure with the previously
removed screws.
TEST SOLAR LIGHT
Cover solar panels completely by using black materials. The fixture will light
up when the solar panel is covered and turn back off when it is uncovered.
Now you can proceed to next steps of installations knowing the fixture is
functional.
INSTALL RISER
Thread the riser onto the fixture
and hand tighten until snug.
INSTALL STAKE
Determine the desired location for
mounting the stake mount. Hammer the stake into the ground until flange of
stake is flush to grade. To avoid damage to the stake, place a board on top of
the stake while hammering.
Note: If the ground is hard and the stake is difficult to install, make a
crosscut in the ground using a flat shovel.
INSTALL RISER TO STAKE
Thread the riser on to the
stake and hand tighten until snug.
813.978.3700
•customersupport@voltlighting.com
•www.voltlighting.com
1-813-978-3700
• Mon-Fri 8am-8pm
• Sat-Sun 10am – 6pm (EST)
Specifications and product details subject to change without notice.
© Copyright 2023, VOLT® Lighting, Lutz FL USA 33549
• All rights reserved.
customersupport@voltlighting.com
• www.voltlighting.com
Documents / Resources
| VOLT
VSPL-1045-BBZ-R1 Volt Solar Landscape
Lighting
[pdf] Instruction Manual
VSPL-1045-BBZ-R1, VSPL-1045-PBK-R1, VSPL-1045-BBZ-R1 Volt Solar Landscape
Lighting, VSPL-1045-BBZ-R1, Volt Solar Landscape Lighting, Solar Landscape
Lighting, Landscape Lighting, Lighting
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>