BLiTZWOLF BW-CML4 Monitor Light Bar Rechargeable with APP Control User Manual

**BLiTZWOLF BW-CML4 Monitor Light Bar Rechargeable with APP Control User Manual

**

Overview

1. RGB ON/OFF Button
   Short press the RGB switch button to turn on/off the RGB light.
   Long press the RGB switch button for about 5 seconds until the red light flashes to enter the APP connection mode.

2. RGB Mode Switch Button
   Short press the RGB mode switch button to turn on the four working modes：Gradient Mode/Symphony Mode/Adjoint Mode/Classic mode.

3. Color Temperature Adjustment Button
   Press and hold the color temperature adjustment button to adjust the three- clock light color temperature: 3000K (warm light)/4000K (natural light)/6500K (cool light).

4. Light Brightness Adjustment Button
   Press and hold the light brightness adjustment button to adjust the brightness of the front lighting: 10%/20%/40%/60%/80%/100%.

5. White Light ON/OFF Button
   Click the white light on/off button to turn on/off the white light.

6. Type-c Power Input

7. Collect Music Microphone

8. Install The Fixing Clip

Quick Start

**Installation Instructions

**

Step 1 : Place the light bar with clip on top of your monitor, make sure the light bar is fixed.

Step 2 : To supply power to the light bar, it is recommended to use a 5V/2A power adapter.

App Operation

Before starting the paring, make sure your smartphone is connected to a 2.4GHz Wi-Fi network and turned on Bluetooth. If your router supports both 2.4G and 5G Wi-Fi, please separate the two frequency bands in the router settings, and select the 2.4G Wi-Fi to connection.

Step 1. Install the App.
You can search for the “BlitzWolf”,“Tuya” and “SmartLife” App on the App Store/Google Play, and install it. Open the App and click “Register”, or if you have an account, click “Login.”

Step 2. Connect your light bar to the App.

1. Enter the App, click “+” in the upper right comer, select “Lighting”, and click on “Light Source(BLE+Wi-Fi)” to add the Smart ScreenBar.

2. Power on the light bar.
   Press and hold the RGB Light ON/OFF Button( )for 5 seconds, to activate the red light into rapid blinking status, the light bar will be enter pairing mode( If the phone has Bluetooth turned on, the APP may automatically pop up the light bar pairing page).

3. Tap “Confirm indicator rapidly blink”, choose the Wi-Fi network and enter the Wi-Fi password, the App will detect to the light bar. 2.4 Wait for the light bar to configure successfully, then tap “Completed” to enter the device page.

Connect Amazon Alexa/Google Assistant

If you need voice control of the smart light bar (turn ON/OFF/change the color/adjust the brightness, etc.), please refer to the configuration instructions of the Alexa/Google Assistant control platform. And please make sure your Alexa App/Google Home App has been connected to Echo/Google Assistant.

Specifications

Model

| BW-CML4
---|---

Rated Input

| DC 5V 2A
Maximum Power|

10W

Light Source

| LED
Lamp Life|

50,000h

Luminous Flux

| 200-250lm
Color Temperature|

3000K-6500K

Color Rendering Index

| 90
Material|

Aluminum Alloy+PC+ABS

Lamp Size

|

Φ2.2x48cm

MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>