PHILCO GH1206SNL 60cm Pull Out Range Hood Instruction Manual
- October 27, 2023
- PHILCO
Table of Contents
PHILCO GH1206SNL 60cm Pull Out Range Hood Instruction Manual
INSTALLATION
Fixing dimensions
WARNING!
Failure to install the screw or fixing device in accordance with these
instructions may result in electrical hazards.
Drilling holes
Drill the holes on top of wooden cupboard
- drill Ø 7mm hole
- drill Ø 16mm hole
- cut Ø 196mm hole
Fixing the ducting adapter
Connect Ø150mm ducting adapter to the blower outlet and use screws to fix it
to the range hood.
If necessary, connect the 0150 to 0125mm adapter to the 0150mm ducting
adapter.
Important! For best performance, 0150mm ducting is recommended (125mm
ducting can be used, but will reduce the airflow of the cooker hood).
Fixing the Lateral spacers
Mounting the rangehood to the underside of cupboard
Attach the rangehood to wooden support and fix it with the 4 screws supplied.
Fixing the Rear Spacer
Use suitable Rear Spacer to cover the space between the wall and the rangehood
and fix it with 2 screws.
Fixing flexible duct
Connect 150 mm or 125 mm fexible duct to the adapter and fix it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>