MEGA LITE DECO Sconce Q20 Wall Light User Manual

DECO Sconce Q20
USER MANUAL

Check that the unit has not been damaged during transport

**** Read all cautions and warnings prior to operation of this equipment

Protection Against Fire

1. Maintain a minimum of 1-foot distance from any type of flame.
2. Do not install the unit too close to a heat source.
3. Make sure cables are properly secured away from the movement.
4. The maximum surface operating temperature is 125°F.
5. The unit must not be left on for long periods of time.

Protection Against Electrical Fire

1. Disconnect power before servicing.
2. For connection to the main power supply proceed to page 5.
3. This fixture must not be left on for long periods of time.
4. This fixture is intended for indoor use. Do not install this unit outdoors.

Protection Against Mechanical Hazards

1. Use safety measures when hanging the unit.
2. Use quality bolts when positioning the unit.
3. Do not open; risk of electrical shock.

Ingress Protection
The IP rating is commonly expressed as IP (Ingress Protection) is followed by 2 numbers (i.e. 64) where the numbers define the fixture rating. The first number indicates the size of a particle that can enter the fixture.. The second number indicates the extent of protection against water entering the Fixture. An IP64 rating in this fixture indicates that dust particles cannot enter the fixture. And there is protection against water splashes from entering the fixture from any direction.

What Is Included

1 PC Deco Sconce Q20
1 PC User Manual

Specifications

Part Numbers
Fixture
5053– Deco Sconce Q20

Mechanical Specifications

Electrical Specifications

Main Power Connection

Important Information!

1. Deco Lighting fixtures are specifically designed to be used with Deco Drivers
2. Maximum Cable distance of 100ft before voltage drop (voltage drop will cause intensity drop)
3.  Max Power 20W output driver 1 unit per output
4. Max Power 96W output driver 5 units per output
5. All fixtures connected together must be the same type (do not connect Variable White or Single Color fixtures in the same output)
6. Must use Cat 6A, 24 AWG or thicker to connect the fixture and fixture to fixture (not included)

DMX-512 Control

When using the Deco Sconce Q20 with Deco Drivers the fixture is intended to be used in Ch4 or Ch7 modes. The Deco
The driver will be required to be set in Ch4 or Ch7 operating modes.

Ch4 Mode

Red
Green
Blue
Warm White

Ch7 Mode

Dimmer
Red
Green
Blue
Warm White
Strobe
Macro

Deco Driver Info

Installation

Caution!

1. The installation must be carried out by an authorized dealer or trained professional
2. A unit may cause severe injuries, if you have doubts concerning the safety do not install
3. Unit is to be 24inches away from flammable materials (decoration material)

When installing the fixture it is very important that you follow common safety procedures. Installation requires extensive experience including but not limited to calculating working loads, material being used, and periodic safety inspections. If you lack these qualifications, do not attempt the installation yourself, instead use a professional structural rigger.
The installation location of the Fixture has to be built in a way that it can hold 10 times the weight for 1 hour. Installation should be checked at least once every 2 years by a professional technician.

Step 1: Remove the mounting brace (Fig1) by removing the side screws (Fig3) on the fixture base.
Step 2: Secure the mounting brace to the electrical box with a screw. (Fig2)
Step 3: Make necessary power connections using the RJ45 in and out connections. Input and output connections can be connected to either connection.
Step 4: Please cover the last unused output connection with the RJ45 cover that is removed from the Deco Driver output.
Step 5: Secure the canopy to the mounting brace using (Fig3) screws.
Step 6: To avoid water ingression into the fixture, seal the mounting to the surface using a silicone adhesive.

Size & Weight

Cleaning and Maintenance

Installation Maintenance: The operator has to make sure that the unit is operating safely and has the installation and electronics checked by an expert every 2 years.
The following points have to be considered during the inspection:

1. All screws used for installing the device or part of the device have to be tightly connected and must not be corroded.

2. There must not be any deformations on the housing, fixation, and installation spots.

3. The electronic power supply cables must not show any damages, material fatigue (e.g. porous cables), or sediments.
   Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed.

4. The fixture must only be cleaned using soap and water.

MEGA Systems, Inc. Warranty
MEGA SYSTEMS INC (“MSI”) hereby warrants to the original purchaser/owner (“Customer”), MSI products to be free of manufacturing defects in material and workmanship, for the warranty periods as defined below from the original purchase invoice date. This warranty applies exclusively to new MSI branded and/or distributed products listed below, purchased from an MSI AUTHORIZED dealer/ reseller. This warranty is not transferable and may or may not apply to products sold and/or forwarded outside the United States. Please contact MSI for applicable regional product warranty information.

The purchase of MSI products constitutes the Customer’s acceptance of all warranty terms and conditions as listed in this limited warranty statement. This warranty provides the Customer with legal rights, which may vary from state to state. Please contact MSI regarding warranty questions prior to purchasing.

Battery Powered LED

Moving LED, Hazers

Outdoor IP-Rated LED

| Six-month battery, one year all other components
One year
Two years
Three years| 1, 2
2
3
4

House Light LED, Decorative LED, Compact LED, iCandy LED, Theatrical LED, Strobe Wash LED, Follow Spot LED, Production & House of Worship Control, Architectural Control, Theatrical Control, Dance Venue & Mobile DJ Control, Direct View LED Displays and MV

1. Battery: 183 days/six months 2. Parts and Labor: 365 days/one year 3. Parts and Labor: 730 days/two years 4. Parts and Labor: 1095 days/three years

This limited warranty excludes any defects caused by, resulting from, or relating to the following:
Normal wear and tear of lamps, color media, brushes, contact rings, lamp sockets, belts, and other parts prone to wear and tear.
Misuse, abuse, improper handling, accident, alteration or attempts to repair by or on behalf of the owner or any person not authorized by MSI.
Damage to the product resulting from acts of God, including, but not limited to, earthquakes, hurricanes, tornados, lightning and other natural disasters, fire, explosion, flood, riots, civil disorder, or any other cause beyond the reasonable control of MSI.
Exposure to harsh or excessively corrosive environmental conditions (whether indoors or outdoors), including, but not limited to, extreme temperatures, humidity, atmospheric conditions (including salinity or pressure), radiation (UV, infrared or nuclear), shock, and conditions which exceed the product’s
Ingress Protection (“IP)” rating.
Use of the product in a manner which exceeds the applicable product specification, including, but not limited to, exposure to excessive, insufficient, or other voltage conditions.
Installation or use of the product not in accordance with the technical documentation, MSI guidelines (as may be posted on its website at www.megasystemsinc.com from time to time or otherwise designated by MSI or its brands), or applicable building and electrical codes, regulations, and standards.
Failure to maintain the product in accordance with the technical documentation.
Natural degradation and color shift of the LED source over the course of normal product use.
Slight deviations in the specified values of intensity and color do not affect the functionality of the product.
Use of the product not for its intended purpose.

All warranty claims are evaluated under the terms of this limited warranty. If a product fails within the warranty period and if, upon examination by MSI it is found to have failed for a covered cause, MSI will, at its sole discretion, repair or replace the defective part or product or reimburse the purchaser a pro-rated portion of the purchase price based on the percentage of the warranty period still remaining as of the date that the returned product was received by MSI. Should a replacement part or product be discontinued or unavailable, MSI reserves the right, in its sole and absolute discretion, to substitute a comparable replacement part or product for the defective part or product. MSI warranty obligation hereunder is limited solely to the repair or replacement of or reimbursement for the particular parts or products determined by MSI to have failed for a covered cause within the warranty period. In no event shall MSI be responsible to replace or reimburse the purchaser for any products or portions of a system that MSI determines has not failed for a covered cause within the warranty period, even if such other products or portions of a system are used together with products being repaired or replaced by MSI under this warranty and the repaired product differs in brightness, colors or any other attribute after the repair.

Costs of removal, shipping to MSI or its authorized representative, and reinstallation are solely the responsibility of the purchaser. If MSI
determines that the product is covered by this limited warranty, it will only pay for parts and labor as indicated by product type. If MSI determines that the product is not covered by this limited warranty, the purchaser will have the option of paying for the repair (if the product can be repaired) and the purchaser shall be responsible for the cost of shipping the repaired product back to the purchaser. MSI reserves the right, in its sole and absolute discretion, to decline any repair.

IN NO EVENT SHALL MEGA SYSTEMS, INC. BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT, OR PUNITIVE LOSS OR DAMAGE OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUES, LOSS OF USE OF THE PRODUCT OR ANY OTHER GOODS OR ASSOCIATED EQUIPMENT, DAMAGE TO ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE PRODUCTS, FACILITIES OR SERVICES, DOWNTIME COST, INSTALLATION OR LABOR COSTS, OR CLAIMS OF THE PURCHASER’S CUSTOMERS, WHETHER BASED ON WARRANTY, CONTRACT OR NEGLIGENCE, ARISING IN CONNECTION WITH THE SALE, USE, OR REPAIR OF THE PRODUCT. MEGA SYSTEMS INC’S MAXIMUM LIABILITY SHALL NOT, IN ANY CASE, EXCEED THE PURCHASE PRICE OF THE PRODUCT THAT GIVES RISE TO THE CLAIM.

EXCEPT FOR THE LIMITED WARRANTY SET FORTH HEREIN, ALL PRODUCTS SOLD BY MEGA SYSTEMS, INC. ARE SOLD “AS IS” WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY AND SPECIFICALLY DISCLAIMED BY MEGA SYSTEMS, INC.

Customer Support

MEGA-Lite has a customer support line to provide set-up help and to answer any question should you encounter a problem. Please visit our website for any other related technical documents. For service-related issues please contact our service dept.

Monday—Friday 9am to 6pm CST
Phone: 210-684-2600
E-mail: service@mega.lighting

Manual Version
Please visit www.mega.lighting for the most up-to- date manual version.

Document
Version| Date| Fixture Software| Notes
---|---|---|---
1.0| 7/03/2021| N/A|

MEGA-Lite
18668 Highway 16N
Helotes, Texas 78023
Ph 210-684-2600 Fax 210-855-6279
www.mega.lighting / info@mega.lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>