MEGA LITE DECO-5050C Curvable RGB Warm White LED Neon Flex Tube User Manual
- June 6, 2024
- MEGA LITE
Table of Contents
MEGA LITE DECO-5050C Curvable RGB Warm White LED Neon Flex Tube
Check that the unit has not been damaged during transport
Protection Against Fire
- Maintain a minimum of 1-foot distance from any type of flame.
- Do Not install the unit too close to a heat source.
- Make sure cables are properly secured away from the movement.
- The maximum surface operating temperature is 125°F
- The unit must not be left on for long periods of time.
Protection Against Electrical Fire
- Disconnect power before servicing.
- For connection to main power supply proceed to page 5.
- This fixture must not be left on for long periods of time
Protection Against Mechanical Hazards
- Use safety mesures when hanging unit.
- Use quality clamps or bolts when positioning unit
- Do not open, risk of electrical shock.
Ingress Protection
The IP rating is commonly expressed as IP (Ingress Protection) is followed
by 2 numbers (i.e. 66) where the numbers define the fixture rating. The first
number indicates the size of a particle that can enter the fixture.. The
second number indicates the extent of protection against water entering the
fixture. An IP66 rating in this fixture indicates that dust particles can not
enter the fixture. And there is protection against powerful water spray from
entering the fixture from any direction.
What is Included
- 1pc Deco Flex C
- 6pc Single Point Mounting Clips
- 1pc User Manual
Specifications
Part Numbers
Fixture
5050C– Deco Flex C
Mechanical Specifications
- IP Rating: IP66
- Fastening System: 6 Mounting Clips (included)
- Power Connection: 5 Conductor Cable
- Housing: Silicone type material (3 type)
- Housing Type: Mushroom Top
- Curving Type : Left & Right Curve (when light output is facing up)
- Length: 19’ Feet 10.5” inch Including Cable (605.79cm)
- Cuttable: Cuttable mark located on the bottom, Cuttable every 2.81” inch (71.42mm)
- LED Spacing: .46” inch (11.9mm)
Electrical Specifications
- LED Type: SMD 5050 R,G,B,WW
- Color Temp WW: 3000K
- LED Qty: 504
- Each LED Watts: .19
- Power Input: 24V
- Total Max Power: 94W
- Drive Method: Constant Voltage
Main Power Connection
Caution!
- Deco Lighting fixtures are specifically designed to be used with a Deco Drivers.
- Connection points must not be exposed to moisture or liquids. Use IP Rated Connections rated for outdoor use.
- Maximum Cable distance of 100ft before voltage drop.
- Connect only 1 Deco Flex per Deco Driver output.
The occupation of the connection cable is as follows:
COM | Voltage + | Black Cable |
---|---|---|
R | Red | Red Cable |
G | Green | Green Cable |
B | Blue | Blue Cable |
W | Warm White | White Cable |
DMX-512 Control
When using the Deco Flex C with Deco Drivers the fixture is intended to be used in Ch4 or Ch7 modes. The Deco Driver will be required to be set in Ch4 or Ch7 operating modes
Ch4 Mode
Red
Green
Blue
Warm White
Ch7 Mode
Dimmer
Red
Green
Blue
Warm White
Strobe
Macro
Deco Driver Info
Power Link | 1 Unit | Can connect 1 unit per output port |
---|---|---|
Ch Mode | Ch 4 & Ch7 | Use Ch4 or Ch7 Mode to control the unit |
Size & Weight
Fixture Size | 19’10.5″ (605.79cm) X 17mm X 28mm” |
---|---|
Fixture Packaged | 15″ X 15″ X 1.5″ |
Net Weight | 4.2lb |
Gross Weight | 4.8lb |
Cleaning and Maintenance
Installation Maintenance: The operator has to make sure that the unit is
operating safely and has the installation and electronics checked by an expert
every 2 years.
The following points have to be considered during the inspection:
- All screws used for installing the device or part of the device have to be tightly connected and must not be corroded.
- There must not be any deformations on the housing, fixation and installation spots.
- The electronic power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments. Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed.
- Flex Tube must only be cleaned using soap and water
Rigging the Fixture
Caution!
- The installation must be carried out by an authorized dealer or trained professional.
- The unit may cause severe injures if you have doubts concerning the safety do not install.
- Unit is to be 24inches away from flammable materials (decoration material)
When rigging a unit it is very important that you follow common safety procedures. Rigging requires extensive experi-ence including but not limited to calculating working loads, material being used and periodic safety inspections. If you lack these qualifications, do not attempt the installation yourself, instead use a professional structural rigger. When rigging the unit always be secured with a secondary safety attachment. The installation location of the Fixture has got to be built in the way that it can hold 10 times the weight for 1 hour with out any failures. Installation should be checked at least one time a year by a skilled person.
Accessories
WARRANTY FOR PRODUCTS PURCHASED AFTER JANUARY 1, 2021
MEGA SYSTEMS INC (“MSI”) hereby warrants to the original purchaser/owner (“Customer”), MSI products to be free of manufacturing defects in material and workmanship, for the warranty periods as defined below from the original purchase invoice date. This warranty applies exclusively to new MSI branded and/or distributed products listed below, purchased from an MSI AUTHORIZED dealer/reseller. This warranty is not transferable and may or may not apply to products sold and/or forwarded outside the United States. Please contact MSI for applicable regional product warranty information. The purchase of MSI product constitutes the Customer’s acceptance of all warranty terms and conditions as listed in this limited warranty statement. This warranty provides the Customer with legal rights which may vary from state to state. Please contact MSI regarding warranty questions prior to purchasing.
Product / Series
- BATTERY-POWERED LED
- MOVING LED, HAZERS
- OUTDOOR IP RATES LED
HOUSE LIGHT LED, DECORATIVE LED, COMPACT LED, iCANDY LED, THEATRICAL LED, STROBE WASH LED, FOLLOW SPOT LED, PRODUCTION & HOUSE OF WORSHIP CONTROL, ARCHITECTURAL CONTROL, THEATRICAL CONTROL, DANCE VENUE & MOBILE DJ CONTROL, DIRECT VIEW LED DISPLAYS, AND MV CONTROLERS
Warranty Period Coverage
- Six-month battery one year all other components: 1, 2
- One Year: 2
- Two Years: 3
- Three Years: 4
- Battery, 183 days six months
- Parts and Labor, 365 days one ye
- Parts and Labor, 730 days two year
- Parts and Labor, 1095 days three year
This limited warranty excludes any defects caused by, resulting from or
relating to the following: Normal wear and tear of lamps, color media,
brushes, contact rings, lamp sockets, belts and other parts prone to wear and
tear. Misuse, abuse, improper handling, accident, alteration or attempts to
repair by or on behalf of the owner or any person not authorized by MSI.
Damage to the product resulting from acts of God, including, but not limited
to, earthquakes, hurricanes, tornados, lightning and other natural disasters,
fire, explosion, flood, riots, civil disorder or any other cause beyond the
reasonable control of MSI. Exposure to harsh or excessively corrosive
environmental conditions (whether indoors or outdoors), including, but not
limited to, extreme temperatures, humidity, atmospheric conditions (including
salinity or pressure), radiation (UV, infrared or nuclear), shock and
conditions which exceed the product’s Ingress Protection (“IP)” rating. Use of
the product in a manner which exceeds the applicable product specification,
including, but not limited to, exposure to excessive, insufficient or other
voltage conditions.
Installation or use of the product not in accordance with the technical
documentation, MSI guidelines (as may be posted on its website at
www.megasystemsinc.com from time to time or otherwise designated by MSI or its
brands) or applicable building and electrical codes, regulations and
standards. Failure to maintain the product in accordance with the technical
documentation. Natural degradation and color shift of the LED source over the
course of normal product use. Slight deviations in the specified values of
intensity and color that do not affect the functionality of the product. Use
of the product not for its intended purpose.
All warranty claims are evaluated under the terms of this limited warranty. If
a product falls within the warranty period and if, upon examination by MSI it
is found to have failed for a covered cause, MSI will, at its sole discretion,
repair or replace the defective part or product or reimburse the purchaser a
pro-rated portion of the purchase price based on the percentage of the
warranty period still remaining as of the date that the returned product was
received by MSI. Should a replacement part or product be discontinued or
unavailable, MSI reserves the right, in its sole and absolute discretion, to
substitute a comparable replacement part or product for the defective part or
product. MSI warranty obligation hereunder is limited solely to the repair or
replacement of or reimbursement for the particular parts or products
determined by MSI to have failed for a covered cause within the warranty
period. In no event shall MSI be responsible to replace or reimburse purchaser
for any products or portions of a system that MSI determines has not failed
for a covered cause within the warranty period, even if such other products or
portions of a system are used together with products being repaired or
replaced by MSI under this warranty and the repaired product differs in
brightness, colors or any other attribute after the repair.
Costs of removal, shipping to MSI or its authorized representative and
reinstallation are solely the responsibility of the purchaser. If MSI
determines that the product is covered by this limited warranty, it will only
pay for parts and labor as indicated by product type. If MSI determines that
the product is not covered by this limited warranty, the purchaser will have
the option of paying for the repair (if the product can be repaired) and the
purchaser shall be responsible for the cost of shipping the repaired product
back to the purchaser. MSI reserves the right, in its sole and absolute
discretion, to decline any repair.
IN NO EVENT SHALL MEGA SYSTEMS, INC. BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, SPECIAL, INDIRECT OR PUNITIVE LOSS OR DAMAGE OF ANY KIND,
INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUES, LOSS OF USE OF THE
PRODUCT OR ANY OTHER GOODS OR ASSOCI-ATED EQUIPMENT, DAMAGE TO ANY ASSOCIATED
EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE PRODUCTS, FACILITIES OR
SERVICES, DOWN TIME COST, INSTALLATION OR LABOR COSTS, OR CLAIMS OF THE
PURCHASER’S CUSTOMERS, WHETHER BASED ON WARRANTY, CONTRACT OR NEG-LIGENCE,
ARISING IN CONNECTION WITH THE SALE, USE OR REPAIR OF THE PRODUCT. MEGA
SYSTEMS INC’S MAXIMUM LIABILITY SHALL NOT, IN ANY CASE, EXCEED THE PURCHASE
PRICE OF THE PRODUCT THAT GIVES RISE TO THE CLAIM.
EXCEPT FOR THE LIMITED WARRANTY SET FORTH HEREIN, ALL PRODUCTS SOLD BY MEGA
SYSTEMS, INC. ARE SOLD “AS IS” WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE
EXPRESSLY AND SPECIFICALLY DISCLAIMED BY MEGA SYSTEMS, INC.
Customer Support
MEGA-Lite has a customer support line to provide set up help and to answer any
question should you encounter a problem. Please visit our website for any
other related technical documents. For service related issues, please contact
our service dept.
Monday—Friday 9am to 6pm CST
Voice : 210-684-2600
E-mail: service@megasystemsinc.com
Please visit www.mega.lighting for the most up-to-
date manual version.
Document Version | Date | Fixture Software | Notes |
---|---|---|---|
1.2 | 12/09/2020 | N/A | Power Input Updated |
References
- Concert Touring Lighting | Lighting Consoles - MEGA-LITE
- Buy Stage Lighting Equipment, Controls & Truss Structures | Texas | Mega Systems Inc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>