EKSA W1 RGB Headset Stand with 7.1 Surround Sound User Manual
- June 6, 2024
- EKSA
Table of Contents
EKSA W1 RGB Headset Stand with 7.1 Surround Sound
Introduction
Designed for gamers, EKSA RGB headset stand with 7.1 Surround Sound features immersive surround sound and cool dynamic RGB light. Its USB ports and 3.5mm ports enable the full range of headphones to deliver a better audio experience.
7.1 Virtual Surround Sound Effect
RGB headset stands with 7.1 Surround Sound support 7.1 virtual surround sound
effect via USB ports or 3.5mm jacks. If you want a better 7.1 virtual surround
sound effect, please download the exam 7.1 virtual sound software to enhance
the 7.1 virtual sound effect.
The download link of 7.1 software:
https://www.eksa.net/download
RGB LED & Fingerprint-touch Switch
Combining 8 zones lights, an RGB headset stand with 7.1 Surround Sound can
bring you more environmental options. The fingerprint-touch switch enables you
to quickly switch ON&OFF the RGB effect.
2 x Stable USB 2.0 Ports
USB 2.0 ports allow you to connect your peripheral easily and stably, and it
fits most devices.
2 in 1 Jack & 3.5mm Sound & Mic Jack
The RGB headset stands with 7.1 Surround Sound with three interfaces that can
cope with different headsets, such as a 3.5mm 2 in 1 sound and microphone
jack, a 3.5mm sound jack, and a 3.5mm microphone jack.
Overview
Package Contents
- 1 X EKSA RGB headset stand holder
- 1 X EKSA RGB headset stand base
- 1 x USB cable, 1.8m
- 1 x Screwdriver
- 5 x Screws (1*Screw for Spare Screw)
- 1 x User manual guide
How To Install?
- Get 4 screws out to connect the holder and the base. (Remain 1*spare screw for replacement)
- Mount the 4 screws into the screw hole with screw-driver
Getting Started
- Connect the included USB cable to the Type-C power port on the back of the EKSA RGB headset stand, and connect the opposite end to a USB port on your PC for use.
- Check USB Sound Setting: Settings-Sound- USB Audio Device(Set as default input & output).
- After connecting to your PC, we recommend installing EKSA RGB headset stand 7.1 Surround Sound Driver(www.eksa.net/download) on PC Windows system for a better sound experience.
Q&A
-
Which port supports the 7.1 virtual surround sound effects?
7.1 virtual surround sound effects can be used on each jack (USB ports and 3.5mm jacks). -
Need I download any drivers for this headset stand from your website?
We recommend installing EKSA RGB headset stand 7.1 Surround Sound Driver(www.eksa.net/download) on PC Windows system for a better sound experience. -
How can I turn off the light when I don’t want to use the light?
The light of the RGB headset stand with 7.1 Surround Sound can be turned off by a fingerprint-touch switch. -
What device do the USB ports support?
The 2.0 USB ports support most devices, you can plug your peripheral into this headset stand. -
I bought a 3.5mm jack headset, can it achieve the 7.1 virtual sound effect via your headset stand?
Yes, because the RGB headset stand with 7.1 Surround Sound is a 7.1 virtual sound effect adapter. The 7.1 virtual sound effect can be achieved after you install the driver of it.
Warranty Card
Thank you for choosing EKSA. Please read this warranty card carefully.
What this warranty covers
EKSA offers you a warranty for the product you purchased according to the
following terms:
- The warranty for the product is for a period of 24 months since the day you purchased.
- The warranty is only for the original consumer and is not assignable or transferable to any subsequent consumer.
- During the warranty period, EKSA or its authorized service agents will replace the defective product with a new item or offer refund money.
Contact Us
Thank you for choosing EKSA. Hope you enjoy our product. Have trouble using
our products? Please email us at [email protected] with faulty products. Please
attach the video and the description of the product issue. We could solve the
problem with more details timely.
We will respond to you soon when we receive your email. Email:
[email protected]
Telephone: 00852-6940-4955 (Mon to Fri 9:00AM – 6:30PM, GMT+8 HKT)