Vewior A2 Air Purifiers User Manual
- June 14, 2024
- Vewior
Table of Contents
Vewior A2 Air Purifiers
CUSTOMER SERVICE
Thank you very much for choosing Vewior Air Purifier. We are a team full of innovation and passion, we hope our product can bring you the most convenient and enjoyable experience. If you have any questions or feedback on your new product, please contact our customer support team.
Our customer service team is always ready to assist you if you have any issues or concerns.
BEFORE USE
- Where is the power cord?
- Due to the particularity of the packaging, the power cord is placed inside the air purifier machine. Put the air purifier upside down, open the bottom cover and take out the power cord. Note: Only use the original adapter of the VEWIOR air purifier! Please do not use the same type of adapter to plug in, so as to avoid short circuit damage to the machine.
- Why is the LED panel scratched?
- The LED panels of VEWIOR air purifiers are all covered with a protective film. The protective film may be slightly scratched during shipping. Please don’t worry, please tear off the protective film after receiving the air purifier. You will see a brand new LED panel.
- Why does my LED panel automatically turn off?
- When the air purifier runs for a period of time, the LED display will automatically turn off. This is the automatic screen-off function adopted by the VEWIOR air purifier to save electricity for you. When you find that the LED panel light does not light up during use, please don’t worry, it’s not a malfunction of the machine. If you want to view the data of the LED panel, you can touch any button on the panel to restore the display.
- The air purifier has a PM2.5 indicator that automatically (AUTO Mode) indicates real-time air quality and regulates fan speed based on the air quality in the area. The Pm2.5 indicator will also change color according to the air quality.
PM2.5 Pollution Index| Indicator Color| Air Quality| Fan Speed
---|---|---|---150| Red| Poor| High
75-150| Blue| Moderate| Medium
<75| Green| Good| Low - Other fault problems: If there is any fault with the air purifier machine, please contact us. Phone: 1-888-285-6061. | Email: support@vewiorlife.com.
IMPORTANT SAFETY
Please follow the further recommendations to avoid personal injury or product damage.
WARNING/ATTENTION
- WARNING: Please read the important safeguards carefully before using this appliance.
- ATTENTION: It reminds that misusing or mishandling may cause hurt.
- FORBID: The operation cannot be performed or forbidden.
- FORCE: A certain operation should be performed (mandatory).
WARNING
- Please supervise your children and avoid them from touching or using appliance.
- Do not handle the plug with wet hands.
- It may cause electrical shock.
- Do not disassemble, repair. or reconstruct the appliance.
- It may cause an electric shock,fire hazard,or getting an injury Contact the authorized retailer for item repairing.
- Check if the voltage indicated on the appliance corresponds to the local power voltage before you connect the appliance.
- Other electric appliances used simultaneously may cause the socket to be hot or cause the fire.
PRODUCT INTRODUCTION
Dear customer, thank you for choosing VEWIOR air purifier. Please read this manual carefully before first use. This product is a large air purifier suitable for desktops and flooring.
The unique appearance design provides users with an aesthetic experience. Air circulation and purification are improved by having all sides’ air intake and an air output on the top surface. The unit is compact enough to fit on a desktop and floor to meet the needs of a variety of environments. It absorbs, dissolves, or converts various air pollutants, thus improving air quality. VEWIOR air purifier provides consumers with clean and fresh air. Bring nature to your home!
PRODUCT OVERVIEW
NEED ATTENTION
- Open the packing box, take out the machine and the filter, remove the plastic packing bag. Put the filter element in the cylinder of the air purifier then turn the filter in the direction of the mark” “to tighten the filter buckle.
- To better exert the performance of the air purifier, the air inlet of the machine should be kept a certain distance (above 20 cm recommended) from the obstruction.
- Take out the power adapter, connect the power supply and the purifier socket. The key light will flash after power on.
- Do not block the air inlet and outlet. Such as by placing items on the air outlet or in front of the air inlets closer than 20cm.
- Check if the voltage indicated on the appliance corresponds to the local power voltage before you connect the appliance.
- Please insert the plug into the power socket firmly. After switching the power on, the indicator light will flash.
CONTROL PANEL OVERVIEW
HOW TO REMOVE THE PROTECTIVE BAG
- Rotate the twist handle clockwise to unlock the base cover.
- Flip the air purifier over and remove the filter.
- Remove the filter plastic protective bag before installation.
- Place the filter into the air purifier and install the base cover properly Tighten the filter buckle until clicks into place.
OPERATION
- Power key: After power on, press “ “, and the light circle of the air quality display screen will be on, with the value displayed in the middle, and 1P for speed.
- Auto mode: Press in any other running mode, and the machine will enter the auto mode. In the auto mode, the AUTO key light is on, and the machine will automatically select the appropriate speed based on the air quality signal detected by the sensor.
- High speed function: Press ” ” to enter the highest speed for running.
- Sleep mode: Press” “, and the machine will enter the sleep mode. The sleep key light is on, the air quality display screen is off, the key lights are off, and the machine will run at low speed and low noise.
- Manual mode: The machine will enter the manual mode after exiting the auto or sleep mode. Press “ ” to manually adjust the speed ranging from 1 to 3.
- Timer function: Press ” ” to start the timed shutdown function. The purifier can be set to shut down after 2 to 12 hours. The set time will be displayed in the countdown way.
- Child lock function: Press and hold” ” for 5s to start the child lock function, and other keys will be locked. Press and hold” ” for 5s again to cancel this function.
- Filter reset function: Press the filter key, and the remaining service life percentage of the filter will be displayed in the window next to the key. After replacing the filter, press” ” , and then press and hold the key for 5s during flashing for resetting. The new filter displays as – – —(that is, > 1000 H).When the filter reaches a certain life, there will be a 100-hour countdown.
- Air quality value display function: After startup, the sensor automatically senses the air quality, and the front display window displays the air pollution value.
Note
- The sensor needs to be preheated for 30s.
- The displayed value of this function is only for reference, so this function cannot be used to replace professional testing equipment.
The function of light
- Green: Indicates that the current air quality is good.
- Blue: Indicates that the current air quality is moderate.
- Red: Indicates that the current air quality is poor.
CARE AND MAINTENANCE
Warning: Be sure to unplug the power adapter before any maintenance!
- Recommended daily cleaning and maintenance frequency of the filter: about once a month. The surface of the filter can only be cleaned with a brush or dry cotton cloth. Do not clean the filter with water or detergent. The filter is easy to be damaged and deformed, so do not press or pull it hard during cleaning. Replace the filter with a new one in case of damage. Do not put the air purifier directly into water to clean it.
- Recommended replacement frequency of the filter: about once every 3-6 months, depending on the place and the usage method. For example, the filter replacement cycle may be shortened in case of heavily polluted areas, smoking of family members, etc. Please replace the filter in time if the filtering effect is not good.
- Surface cleaning: Wipe the outer surface and the air inlet and outlet with a wrung soft cloth. Do not clean the surface with chemical cleaners.
- Not used for a long time: Unplug the power adapter, and clean the outer surface and the filter. Put the purifier in a plastic bag and store it in a place with less moisture.
IMPORTANT
- Do not clean or sprinkle the product with liquid.
- There is a high-speed wind wheel rotating in the purifier, so do not put your hands or foreign matters into the air inlet and outlet.
- Keep the purifier away from children, and do not let them play with this product.
- Keep hair, fabric, etc. away from the machine to avoid being caught in or blocking the air inlet and outlet.
- Close the doors and windows to improve the purification effect when using the product. (Please ventilate when using the purifier with a combustion device to avoid carbon monoxide poisoning.)
- Do not use power adapters of different specifications. Please install the power adapter attached to this product.
- Do not use this purifier in high-temperature, humid, and water-stained places such as bathrooms.
TROUBLESHOOTING
| FAULTS | CAUSES AND SOLUTIONS |
|---|---|
| Peculiar | Too dirty filter. without replacement for a long time – |
Replace the filter.
Filter with water or the machine once used in a humid environment – Replace the filter.
Reuse after long-time idling – clean the filter, or replace the filter if the fault cannot be solved. Burnt smell – Immediately stop using the purifier. unplug the power supply, and contact us for repair.
No wind at the air outlet| Motor not running – Check the power supply.
replace the power adapter or contact us for repair.
No effect| Filter failure – Replace the filter.
Used in inappropriate places (too large area).
Learn more about VEWIOR, please visit us at: www.vewiorlife.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>