EKSA H16S Pro Office Headset User Manual
- May 15, 2024
- EKSA
Table of Contents
EKSA H16S Pro Office Headset
Specifications
- Product Model: EKSA-H16, EKSA-H16 S, EKSA-H16 Pro
- Type: Office headset
- Languages: English, Japanese, French, German, Russian, Spanish, Italian
Product Overview
- Type-C Charging Port
- Power Button
- Volume + / Next Track
- Volume – / Previous Track
- Microphone Mute Button
- LED Status Indicator
- Speaker Output Port
- Microphone Hole
- USB Adapter
- Removable Ear Shell
- USB Type-C Charging Cable
Operation Guide
Switch On/Off
To switch on, press the Power Button. To switch off, press and hold the Power Button until the headset powers off.
Note: The headset will automatically shut down after 10 minutes of inactivity.
Bluetooth Pairing Connection
To initiate Bluetooth pairing mode, press and hold the Power Button until the LED flashes blue and red alternately. Follow your device’s Bluetooth settings to pair with the headset.
USB Adapter Connection
To connect via USB adapter, insert the USB adapter into your computer’s Type-A or Type-C port. The indicator light will flash to indicate pairing mode. Select the appropriate audio driver for the connection.
One to Two Bluetooth Connection
This headset supports connecting to two devices simultaneously via Bluetooth. Follow the steps provided in the manual for a seamless dual connection setup.
FAQ
How do I charge the headset?
Connect the USB Type-C charging cable to the headset’s Type-C port for charging.
How can I adjust the volume and track controls?
Use the Volume buttons to adjust volume levels and control music tracks.
What do I do if the microphone is not working?
Ensure that the Microphone Mute button is not activated and check the connection with your device.
Package Contents
- EKSAtelecom H16 Wireless Headset
- EKSA USB-A Bluetooth Adapter
- Type-C Charging Cable
- User Manual
Specifications
- Product Name: Office headset
- Bluetooth Version: 5.2
- Driver Diameter: 40 mm
- Impedance: 32 0 ÷ 15%
- Sensitivity: 115 ‡ 3 dB
- Frequency Response: 20 Hz – 20 KHz
- Battery: 400 mAh / 3.7 V
- Charging Time: 2 hours
- Music Time: ≥55 hours (70% volume)
- Talk Time: ≥35 hours (70% volume)
- Effective Wireless Range: 15 m
- Net Weight: 150 g
Product Overview
Operation Guide
Switch on/off
-
In the shutdown state, long press the “power button” for about 2 seconds to start the headset, and the blue light is always on for 2 seconds.
-
In the power on state, long press the “power button” for about 3 seconds to shut down, the red light is always on for 2 seconds, and the headset is turned off.
Note: The headset will shut down automatically in 10 minutes when there is no connection.
Bluetooth Pairing Connection
- When the phone is turned off, long press the “power button” for about 5 seconds to turn on the phone. The blue light and red light flash alternately, and the headset enters the pairing state.
- If no connection is successful after power on, it will automatically enter the pairing state.
- When the headset is disconnected, it will automatically enter the pairing state.
- Turn on the Bluetooth of the device, search for the Bluetooth headset, and then select “EKSA-H16” for pairing connection. After the connection is successful, the headset prompts “Connected”, and the blue light flashes once every 10s. The device displays that the Bluetooth headset is connected.
Note
- If you need to connect a new device, you need to disconnect the Bluetooth connection from the connected device first, and the headset will automatically enter the pairing state, then use the new device to search for Bluetooth and complete the connection with the headset.
- Each time the headset is turned on, it will automatically search for and connect to the nearest connected device.
- When the phone is turned on (except for the call), press and hold the volume up key and volume down key for 5 seconds at the same time, and the red and blue lights flash once at the same time to clear all pairing information in the headset. After the pairing record is cleared, the previous device cannot be connected after the phone is turned on again, and you need to pair and connect again.
USB Adapter Connection
PC:
- Insert the USB adapter into the computer, and the adapter will automatically start up and display “EKSA PC Adapter” on the computer, and the blue LED of the adapter will slowly flash into the pairing state.
- Turn on the headset, and the headset and adapter will automatically connect successfully.
Note: A computer with Bluetooth function can have Bluetooth connection and USB adapter connection at the same time; Select one of the connection methods by switching the audio driver. Select the audio driver with the name of EKSA-H16 for Bluetooth connection, and select the audio driver with the name of EKSA PC Adapter for USB adapter connection.
- After successful connection, the headset blue light flashes once every 10 seconds, and the adapter blue light remains on.
Windows
One to Two Bluetooth Connection
The headset supports the simultaneous connection of two devices via Bluetooth. The specific steps are as follows:
- First connect the headset to device A through Bluetooth pairing, and then turn off device A. At this time, the headset is disconnected and enters pairing mode.
- (2) Then open device B, and successfully connect with the headset through Bluetooth search pairing.
- Turn on device A again, and then connect the headset through device A. After the connection is successful, the headset will be connected to device A and device B at the same time.
Note: The headset is connected to two devices at the same time. Only one of the devices works when using it. When the other device needs to be used, the currently working device needs to be suspended.
Call Functions
Call Handling:
Three-Way Calling
Music
- Short press the power key to play and pause music.
- Long press the volume decrease key to perform the previous song operation.
- Long press the volume increase button to perform the next song operation.
Volume Up and Down
- Short press the volume up key to increase the volume.
- Press the volume decrease key briefly to decrease the volume.
Charging
- When the headset battery is low, a voice reminder will be given every 3 minutes: “Low Battery please charge”, and the red light will flash once every 5 seconds.
- Plug in the USB TypeC charging cable for charging, reset the headset and turn it off automatically, enter the charging state, the red light is always on when charging, and the blue light is always on when fully charged.
FAQ
Q1: The microphone or headset has no sound, or the sound is low
- First check whether the headset is correctly connected to the device by referring to the manual, and then use the device to talk or listen to music.
- Confirm that the microphone of the headset or device is not muted and adjusted to the appropriate volume. Confirm that the speaker of the headset or device is not muted and adjusted to the appropriate volume.
- Set the audio driver of the device correctly; Select EKSA-H16 for Bluetooth connection and EKSA PC Adapter for USB adapter connection.
- Replace another device or another USB jack to use, and confirm that the headset can work normally.
Q2: The headset does not power on/work/do not recognize
- First, refer to the headset manual, connect the headset and the computer correctly, and confirm that the connection is in good contact.
- Check whether the headset power supply is normal and ensure that the headset can be switched on and off normally.
- Check whether the headphone connector and the computer connector are dirty. Please keep the connector clean to prevent poor contact due to dirt.
- Replace another device or another USB jack to use, and confirm that the headset can work normally.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure statement.
The device can be used in portable exposure condition without restriction
FCC ID:2A25A-H16
IC Caution:
Radio Standards Specification RSS-Gen, issue 5
This device contains licence-exempt transmitters)/receivers) that comply with
Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may
cause undesired operation of the device.
RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Limited Warranty
Our friendly customer service team is ready and waiting to help. Feel free to contact us:
-
GLOBAL: +852 6940 4955 (Mon to Fri 9:00 am-6:30 pm, UTC +8 HKT)
INDIA: +91-8929-369-620 (Mon to Fri IST 9:30 am-5:30 pm) -
GLOBAL: info@eksatelecom.com
-
INDIA: support@eksatelecom.co.in
-
Manufacturer: YI ZHAO (SHENZHEN) CO., LIMITED
-
Add.: 6th Floor, T3 Creative Building, Shenzhen Colorful Huiwei Cultural and Creative Expo City, No.5010 Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District, Shenzhen City, Guangdong Province, China
6th Floor, T3 Creative Building, Creative Expo City, No.5010 Baoan Avenue, Hangcheng Street, Baoan Shenzhen, China -
EC REP
C&E Connection E-Commerce (DE) GmbH
Add.: Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
Tel.: +4906927246648
Email: info@ce-connection.de -
UK REP
APEX CE SPECIALISTS LIMITED
Add.: 89 Princess Street, Manchester, M1 4HT, UK
Tel.: +441616371080
Email: info@apex-ce.com
Be Heard Anywhere
Documents / Resources
| EKSA
H16S Pro Office
Headset
[pdf] User Manual
H16S Pro Office Headset, H16S Pro, Office Headset
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>