EKSA Telecom H5 Dual Wireless Headset User Manual

: May 15, 2024
: EKSA Telecom

Table of Contents

EKSA Telecom H5 Dual Wireless Headset
Packing List
Specifications
Product Overview
Operation Guide
Call Functions
Bluetooth Pairing
Dual Pairing
Reset
Charging
Limited Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EKSA Telecom H5 Dual Wireless Headset

Specifications

Headset Bluetooth Version: V5.0
Adapter Bluetooth Version: V5.2
Effective Wireless Range: 10m/32ft
Speaker Diameter: 30mm
Frequency Response (Headset): 20Hz~20kHz
Frequency Response (Microphone): 100Hz~10kHz
Polar Pattern: Omnidirectional Mic
Advanced Features: AI-Powered Environmental Noise Cancellation

Product Overview
The product features an AI-Powered ENC microphone, Bluetooth & Charging indicators, volume control buttons, a mic mute button, and Type-C charging ports.

Operation Guide

Multi-Function Button: Press for 3 seconds to turn the headphone on/off. Single click for Play/Pause, triple click for Voice Assistant/Siri.
Volume Button: Single click for volume control, press for 2 seconds to skip tracks.
Mic Mute Button: Single click to toggle microphone on/off.
Call Functions: Various actions for call handling and three-way calling.

Bluetooth Pairing
Mobile Phone:

Turn on EKSAtelecom H5 until Bluetooth indicator flashes alternately between red and blue.
Activate Bluetooth on your device, search for EKSA-H5, and pair.
Ensure distance within 1 meter during pairing. Pin code: 0000 if needed.
To pair with a new device, turn off Bluetooth on the current device and repeat the process.

PC:

Plug EKSA PC adapter into PC’s USB port for call functions and software compatibility.
Adapter will turn on with name ‘EKSA PC Adapter’ displayed on the computer.
Put headset in pairing mode and place near the EKSA PC adapter for connection.

FAQ

Q: How do I know if the headset is successfully paired?
A: The Bluetooth indicator will flash slowly in blue light with a voice prompt confirming the connection.
Q: What do I do if the headset does not connect within 10 minutes?
A: If unable to establish a connection within 10 minutes, the headset will automatically turn off. Retry the pairing process.

Packing List

EKSA-Telecom-H5-Dual-Wireless-Headset-FIG-1

EKSAtelecom H5 Wireless Headset
EKSA PC Adapter
Type-C Charging Cable
Charging Stand
Carry Pouch
User Manual

Specifications

Headset Bluetooth Version: V5.0
Adapter Bluetooth Version: V5.2
Effective Wireless Range: 10m/32ft
Music Time: —45 hours (70% volume)
Talk Time: —25 hours (70% volume)
Charging Time: *1.5 hours
Speaker Diameter: 30mm
Impedance: 32Q±15%
Sensitivity: 125dB±3dB
Frequency Response: 20Hz—20kHz
Size: 2.7mm * 1.85mm
Sensitivity: -25dB±1 dB
Frequency Response: 100Hz—10kHz
Impedance: 2.2kQ
Polar Pattern: Omnidirectional
Mic: A1-Powered Environmental Noise Cancellation

Product Overview

EKSA-Telecom-H5-Dual-Wireless-Headset-
FIG-3

AI-Powered ENC Microphone
Bluetooth & Charging Indicator
Charging Contacts
Volume + / next track
Type-C Charging Port
Volume – / previous track
Multi-Function Button (MFB)
Mic Mute Button
Type-C Charging Port
Charging Indicator
EKSA PC Adapter
Charging Contacts

Operation Guide

Multi-Function Button:

Volume Button:

Mic Mute Button:

Call Functions
Call Handling:

Redial:

Audio Switching:

Press for 2 seconds:
During a call, you can switch your audio device.

Call Functions

Three-Way Calling:

Bluetooth Pairing

Turn on EKSAtelecom H5, until its Bluetooth indicator flashes alternately between red and blue, indicating that the headset is in pairing mode.
Turn on the Bluetooth of your device, activate the search feature, and select “EKSA-H5”. After pairing, the Bluetooth indicator flashes slowly in blue light with a voice prompt “your headset is connected”, confirming a successful connection. Note:
Ensure that the distance between the EKSAtelecom H5 and the device you want to pair should be kept within 1 meter.
If necessary, the pin code to complete pairing is “0000”.
While in pairing state, if a connection cannot be established within 10 minutes, the headset will automatically turn off.
When the headset is turned on again, it will connect to the last connected device automatically.
To connect to a new device, turn off the Bluetooth of the currently paired device and follow the above steps to connect successfully to a new device.

PC:
If you want to connect the headset to a PC, you can use the EKSA PC adapter provided in the package. Then, you can enjoy the call function and compatibility of the third-party software of the PC. Follow the steps below to get it done.

. Plug the EKSA PC adapter into your PC’s USB port. The adapter will turn on automatically with a name of “EKSA PC Adapter” displaying on your computer.
When enabled, the indicator on the EKSA PC adapter will flash a blue light, which indicates that it is in pairing mode. Then, put the headset on pairing mode and place it as close to the EKSA PC adapter as possible (within 8 inches). The headset will automati- callv connect to the EKSA PC adapter.
Note : It takes about 20 seconds to establish a connection between the headset and a PC for the first time. Suppose the connection is unsuccessful, please unplug the adapter and plug it back into the PC. Then restart the headset’s pairing mode and reconnect to your computer.
After the headset is successfully connected, the Bluetooth indicator on the headset will slowly flash a blue light while the EKSA PC adapter’s indicator will always be blue.
Note : When the EKSA PC adapter is not in use, please insert the adapter into the storage hole of the charging stand to avoid misplacing it.

Dual Pairing

After successfully connecting the EKSAtelecom H5 to device A, turn off the Bluetooth of device A. The headset’s Bluetooth indicator flashes in red and blue alternately to signify pairing mode.
Turn on the Bluetooth of device B, activate search mode, and connect to EKSAtelecom H5.
Turn on the Bluetooth of device A to connect with EKSAtelecom H5. This puts both devices A and B in a simultaneous connection with EKSAtelecom H5.

Reset

EKSA-Telecom-H5-Dual-Wireless-Headset-FIG-34

When EKSAtelecom H5 is in connected/pairing mode, press and hold the “volume + ” and “volume – ” buttons simultaneously for 6 seconds until the LED lights up in red and blue, indicating the pairing information is cleared.

Charging

EKSA-Telecom-H5-Dual-Wireless-Headset-FIG-36

When the battery is less than 10%, the headset will give a voice prompt “battery low” every 3 minutes.
Please charge it as soon as possible. 2. When EKSAtelecom H5 is not in use, please charge it at least once every 2 months.
Please use the original charging cable for charging. Charging voltage can’t exceed 5V.