DeLonghi TCH Series Ceramic Fan Heater Instruction Manual
- October 26, 2023
- Delonghi
Table of Contents
DeLonghi TCH Series Ceramic Fan Heater
Electrical connection (UK only)
A) If your appliance comes fitted with a plug, it will incorporate a 13
Amp fuse. If it does not fit your socket, the plug should be cut off from the
mains lead, and an appropriate plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug after removing the
fuse: do not insert in a 13 Amp socket elsewhere in the house as this could
cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit must be re-fitted
when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the
event of losing the fuse cover, the plug must NOT be used until a replacement
fuse cover can be obtained from your nearest electrical dealer. The colour of
the correct replacement fuse cover is that as marked on the base of the plug.
B) If your appliance is not fitted with a plug, please follow the
instructions provided below:
Important
The wires in the mains lead are coloured in accordance with the following code:
| Blue: | Neutral |
|---|---|
| Brown: | Live |
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which si
marked with the letter L or coloured red.
Overview
Use Instructions
De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com
