VenTion OpenBeat NBU Wireless Bluetooth Earbuds User Manual
- August 24, 2024
- VENTION
Table of Contents
VenTion OpenBeat NBU Wireless Bluetooth Earbuds
FAQs
What should I do if water enters the headphones?
If water enters, please dry it naturally before use to avoid any damage to the product.
How can I reset the device pairing record?
Click on the left or right headphone 5 times in Disconnection State to clear the device pairing record (TWS inter-pairing information will be retained).
How can I ensure product safety?
Please read all instructions and warnings before using this product. Non- standard use may damage the product or pose risks to personal safety. Avoid exposure to sunlight, fire, or high-temperature environments.
introduction
The Ventioc Open Beat 012日pen Ear Headphones feature a sleek spherical design with a striking breathing lights effect. The product offers comfy。” able and stable wear, exceptional sound quality, with a handy portable lanyard, enhancing your musical journey with both comfort and st圳e
Specifications
- Model: NBU
- Bluetooth Version: Bluetooth 5.3
- Material: ABS+ PC
- Headphones’ Battery Capacity: 35mAh/0.1295Wh
- Headphones Input Power: 5V -35mA
- Charging Case’s Battery Capacity: 400mAh/1,48Wh
- Charging Case’s Input Power: 5V- 230mA
- Charging Case’s Interface: USB-C
Product Overview
Instruction
power on.
Take the headphones out of the charging case, and the headphones will
automatically.
Pair & Connect
- For the first connection, after being taken out of the charging case, the left and right headphones priority interconnect and enter the Automatic Pairing State: Note: Pairing Mode will be automatically on after one headphone powers on. The headphone has a connection record and will be connected to the previous device after powering on; if fails, it will automatically enter the Pending Pairing State.
- Start the Bluetooth of your mobile phone or other devices, click “Vention 012” in “Search for Bluetooth Devices”, and click ‘Pairing” when the device is searched. You will hear a prompt tone if the connection is done.
Note: If the headphone is out of the connection range, it will enter Callback State for 3 minutes, and will automatically power off if there is no connection during that time, If the headphone is not connected to a device, it will automatically power off after 3 minutes Power Off
Automatic:
- After turning off the Bluetooth on your device, the headphones will automatically power off after 3 minutes of no connection (the device can be connected again if the Bluetooth is turned on again). After being disconnected from your device, the headphones will automatically power off after 3 minutes of no connection (it can be connected again within 3 minutes).
Manual:
- Put the headphones into the charging case to power it off, Or you can long-press the MFB on the left or right headphones for 5 seconds to power it off.
Phone Calls
- Ring Tone – Syn for IOS
- Answer — Double press the MFB (L/R)
- Hang-Up – Double-press the MFB (L/R)
- Reject – Press the MFB (L/R) for 2s
Music Play
- Pause — Double-press the MFB (L/R)
- Play – Double-press the MFB (L/R)
- Skip Back – Press the MFB (L) for 2s
- Skip Forward – Press the MFB (R) for 2s
- Volume+ — Pressthe MFB (R)
- Volume — Press the MFB (L)
Voice Assistant
In the Standby State, triple press the MFB (R) for 1.5 to turn the Voice Assistant on or off.
Indicator Lights of Charging Case
- Low Power (about 10%): The white lights flash twice for 6 times and then go out;
- Charging: The white lights flash once every 4 seconds, and then go out after the charging case is fully charged;
- Put In the Headphone: The white lights flash 4 seconds 3 times.
Data Reset
- Click on the left or right Headphone 5 times in Disconnection State to clear the device pairing record (TWS inter-pairing information will be retained).
Safety Warning
Please read all instructions and warnings before using this product. Nonstandard use will damage the product or personal safety.
- The battery is included in the product. Please do not expose it to sunlight, fire on another overheating environment: Do not store it in high temperatures, or strong light on a magnetic field environment: Do not place it in other harsh environments such as fire source, If water enters, please dry it naturally before use
- Improper use may easily cause damage to the product or endanger personal and property safety.
- Consumers shall be able for any personal and property damage resulting from their improper use of the user manual on ignoring the warning, to which our company will not bear any legal liability.
- Non-professional personnel are strictly prohibited from disassembling this product.
- Do not use electrical appliances or loads that exceed the output current of this product.
Packaging List
For more interesting information and events, please follow us on social media platforms:
- For warranty service or support,
- please contact Vention team:
- Website: www.ventiontech.com
- Email: vention@ventiontech.com
Declaration on Toxic or Hazardous Substances and Elements in Electronic Products
FCC
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- orient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- consult the dealer or an experienced radio/TV technician for help.
- FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.