SOLIGHT WM58 LED Wifi Smart RGB Strip for TV User Guide
- June 6, 2024
- Solight
Table of Contents
SOLIGHT WM58 LED Wifi Smart RGB Strip for TV
LED WIFI smart RGB strip for TV, 4x50cm, USB Solight WM58
Dear customer, thank you for purchasing our product. Please read the following instructions carefully and follow them to serve you safely and to your full satisfaction. This may prevent misuse or damage. Avoid unprofessional handling of this appliance and always observe the electrical appliance usage guidelines. Keep the instruction manual carefully.
Notice
- Avoid placing the luminaire near objects that are sources of heat or moisture.
- Do not look directly at a lit luminaire for long periods of time as this may cause discomfort or damage to your eyes.
- Do not expose the luminaire to the outdoors, direct rain or immerse it in water. The luminaire is intended for indoor use.
- Periodically wipe the luminaire with a dry or damp cloth only when the luminaire is unplugged.
Parameters
| Belt | Driver | |
|---|---|---|
| Power | USB 5V, 1200mA | Battery CR2032 3 V |
| Power | 6 W; max. 260 lm/m | |
| Operating temperature | -20 °C ~ +60 °C | |
| Controller range | 5 m |
Installation
The LED strip is suitable for TVs with 32-65″ (80-165cm) screen. Install the
strip according to the pictures below depending on the diagonal size of the
TV.
Package contents
- 4x 50cm LED strip
- 1x wifi module
- 1x remote control
- 1x power cable
- 3x flexible connector
- 3x fixed connectors
Remote control functions
CONTROL VIA APP
Download and install the Smart Life app
-
STEP 1 Search Google Play or the App Store for and install the Smart Life apps.
-
STEP 2 Register a new account using your email or phone number and log in to the app
-
STEP 3 Switch to pairing mode
In order to pair the luminaire with the Smart Life app, it needs to be switched to pairing mode. This is indicated by flashing and is activated by plugging and unplugging the luminaire 4 times in succession. After the fourth plugging, you need to wait a few seconds and the strip will flash. -
STEP 4 Add a device
Launch the Smartlife app and tap the “+” button in the top right corner -> Lighting -> Lights (Wi-Fi). Then enter the login details of the wifi network your phone is currently connected to and tap “Next”. On the next screen, confirm by tapping “Confirm the light is blinking rapidly;” that the light is blinking rapidly and then tap “Next”. The pairing process takes a while. After successful pairing, the device will appear in the overview on the main screen of the app. -
STEP 5 Tap the device to control it according to the functions offered by the app you downloaded, e.g. the Smart Life app mentioned above.
You can find the video guide on Youtube by searching for the term solight led
smart wifi or scan the QR code
Note: The lights can only be connected to 2.4GHz WIFI.
The product is covered by a declaration of conformity in accordance with the
applicable regulations. On request
from the manufacturer: info@solight.cz, or
downloadable from www.solight.cz. This product contains a light
source which for design reasons cannot be removed for verification and
therefore the whole product is considered to be a light source.
Producer: Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06,
Czech Republic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>