medela Breast Shells Protectors Instructions
- June 6, 2024
- medela
Table of Contents
Instructions for use
Breast Shells
The Medela Breast Shells are comfortable to wear. The discreet shape and the flexible silicone membrane, which is gentle on the skin, meaning that they are pleasant and invisible to wear. The ventilation holes in the top of the shells allow air to circulate, thus preventing humidity. The breast shell protects sore nipples from further chafing (incorrect positioning of the baby’s mouth around the breast could be a reason for the soreness). Milk leakage is simultaneously collected. The shells can be worn continuously between breastfeeding sessions. If soreness becomes severe or persists, consult a physician or lactation consultant. Avoid wearing at night to prevent tender spots.
Assembly and Use
Put the silicone membrane on the shell. Be sure it snaps on all the way
around. Place the assembled breast shell inside your bra with the opening in
the silicone membrane centered over your nipple. The ventilation holes in the
shell must point upwards. We recommend wearing a nursing bra when using a
shell; nursing bras are roomier and the shell will fit more comfortably.
CAUTION: Do not feed the breast milk collected in the shell to the baby.
Discard this milk.
Cleaning Instructions
Before first use and subsequently once daily
Place the separated parts in a small pan filled with cold water. Distilled
water is recommended – if tap water is used, a teaspoon of citric acid may be
added to the water to avoid a build-up of limescale. Bring the water to boil
and allow it to continue boiling for approximately 5 minutes. Drain off the
water and place the parts on a clean cloth to dry.
After each use
Separate the parts. Shells and membranes should be washed with a mild cleaning
solution, rinsed thoroughly in cold water, and dried on a clean cloth.
Note
Shells and membranes can be put in a dishwasher.
Material
Shell: Polypropylene / Membrane: Silicone
Disposal
According to local regulations.
Meaning of symbols
| Indicates the manufacturer’s product number
(ISO 15223-1, 5.1.6)
---|---
| Indicates the manufacturer’s batch code or lot
(ISO 15223-1, 5.1.5)
| Fragile
(ISO 15223-1, 5.3.1)
| Keep dry
(ISO 15223-1, 5.3.4)
| Protect from sunlight
(ISO 15223-1, 5.3.2)
****| Indicates the need for the user to consult the instructions
for use (ISO 15223-1, 5.4.3)
| Indicates the date of manufacturing
(ISO 15223-1, 5.1.3)
| Identifies the manufacturer
(ISO 15223-1, 5.1.1)
| Indicates that the material is part of a recovery/recycling
process
| Indicates a carton package
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>